Better Bathrooms BeBa 26361 User manual

Side Rail Kit
BeBa_26361 & BeBa_26362
Please note: Image is for illustrative purposes only and may differ slightly to the
actual product
•Single-person assembly
•Tools required
•We always recommend using professional
tradespeople to install your product V1_11.6.20

2
Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We're on a mission to bring you extraordinary bathroom products, for less. From modern
to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So,
you can fall in love with your space every single day.
As one of the UK's largest independent bathroom stores, we've received countless
awards; including the National Business Awards UK, the Digital Entrepreneur Awards and
being placed on The Sunday Times Fast Track 100.
We hope your new product exceeds your highest expectations. However, if you
experience any problems, please:
•call our friendly UK call centre on 0871 244 0935 (9am-7pm Monday to Friday, or
10am-4pm Saturday and Sunday), or
•send us a message via [email protected]
Important information
•Please read these instructions thoroughly and retain for future reference.
Parts
1 x Rail
2 x Rail end brackets
2 x Wall plugs
2 x Wall screws
1 x Hand shower
1 x Shower hose (including 2 x seals)
1 x Slider bracket
Tools required
Drill and 6mm Bit
Screwdriver
Tape measure
Pencil
Spirit level

3
Installation
IMPORTANT: Before drilling, always check for pipes and cables
1. Position the rail end brackets onto the rail and measure the distance between the
fixing holes in the brackets. Mark the dimension in the required location on the wall
and check that the holes are aligned using a spirit level
Please note: Ensure that the location of the slider when at its highest point will not put
the hose under tension.
2. Drill the holes in the location required using a 6mm drill bit then Insert the wall plugs
and tap flat to finish the wall surface.

4
IMPORTANT: When fitting the slider bracket ensure that the wider opening for the hand
shower faces upwards
3. Remove the chrome caps from the end brackets, fit the slider bracket to rail,
pressing the button or turning the lever to loosen, then slide this onto the rail then fit
the rail onto the end brackets.
4. Hold the assembly over the drilled holes and secure using the screws provided.
Finally re-fit the chrome caps to the end brackets.
IMPORTANT: During use, do not move the slider on the rail without pressing the button or
turning the lever to loosen as this will damage the slider bracket over time
Cleaning
To maintain the surface finish of your product, wipe clean after every use, using a clean
damp cloth, a mild detergent mixture can be used. Do not use abrasive cleaning agents or
materials on the product surface.
If any harsh chemicals come into contact with the surface of the product during bathroom
cleaning, rinse off immediately, wipe clean and dry.