Better Bathrooms 24975 User manual

20200317
INSTALLATION MANUAL
Non-Illuminated Bathroom Mirror and Furniture
Thank you for choosing a Better Bathrooms Product
Please read this user manual before installing and using this product
Keep it safe for future reference.
Visit our page www.betterbathrooms.com/for our entire range of Mirrors
and Furniture

20200317
INSTALLATION TOOLS
Spirit Level

20200317
PARTS LIST
Product Description Qty Description Qty Description Qty Des cription Qty Description Qty Description Qty Description Qty
24975
24976
24977
Wall Screw 6 Wall Plug 6 Wall Bracket 2
Round door
handle
2
Round
handle screw
2
Shell Door
Handle
2
Shell Handle
Screw
4
24978
24979
24980
Wall Screw 6 Wall Plug 6 Wall Bracket 2
Round door
handle
2
Round
handle screw
2
Shell Door
Handle
2
Shell Handle
Screw
4
24981
24982
24983
Wall Screw 2 Wall Plug 2 Brass washer 2
Plastic
washer
2 Screw Cap 2
24984
24985
24986
Wall Screw 6 Wall Plug 6 Wall Bracket 2
Round door
handle
2
Round
handle screw
2
25008
25009
25010
Wall Screw 6 Wall Plug 6 Wall Bracket 2
25011
25012
25013
Wall Screw 6 Wall Plug 6 Wall Bracket 2
25014
25015
25016
Wall Screw 6 Wall Plug 6 Wall Bracket 2
25017
25018
25019
Wall Screw 2 Wall Plug 2 Brass washer 2
Plastic
washer
2 Screw Cap 2
25826
25827
25828
25829
25830
25831
25832
25833
Wall Screw 6 Wall Plug 6 Wall Bracket 2
Frame Screw 12
25841
25842
25843
Wall Screw 6 Wall Plug 6 Wall Bracket 2
25838
25839
25840
Wall Screw 6 Wall Plug 6 Wall Bracket 2
Round door
handle
1
Round
handle screw
1
Shell Door
Handle
1
Shell Handle
Screw
2
Shell Round Handle Wall Plastic Brass Screw Wall Wall Frame
Handle Handle Screw Screw Washer Washer Cap Plug Bracket Screw

20200317
INSTALLATION –Check the product for damage prior to installation
Before any drilling is carried out, please check for pipes and wires within the wall which
could be damaged.
MIRROR INSTALLATION
Fitted to the rear of the unit are x 2 fixing brackets, measure the distance between the
two brackets and mark this distance on the wall, ensuring this horizontally aligned, using
a spirit level.
We recommend a height for the brackets of 70” (1778mm) from the floor, but this is
customer choice.
It is recommended to install to a solid wall, but if fitting to a stud wall, the fixings must be
secured into a stud, not only into the plasterboard.

20200317
MIRROR INSTALLATION
After the position of the brackets is marked, drill the holes in the wall, using an 8mm drill
bit (not supplied), to a depth of approx 40mm.
Insert the wall plugs and tap flush with the wall surface.

20200317
MIRROR INSTALLATION
Hold the bracket up to the wall over the drilled holes and secure using the screws
provided.
Ensure the brackets on the rear of the unit are fully tightened.
Lift the product on the wall mounted brackets to engage both sections of the brackets.
Once installed a bead of silicone can be applied around the edges of the unit if required.

20200317
CABINET INSTALLATION
Fitted to the rear of the unit are x 2 fixing brackets, measure the distance between the
two brackets and mark this distance on the wall, ensuring this horizontally aligned, using
a spirit level.
We recommend a height for the brackets of 27.5” (698mm) from the floor, but this is
customer choice.
It is recommended to install to a solid wall, but if fitting to a stud wall, the fixings must be
secured into a stud, not only into the plasterboard.
It is also recommended to set up the unit before installing the basin not the unit, so any
adjustment can be made, via the fixings on the unit.

20200317
CABINET INSTALLATION
After the position of the brackets is marked, drill the holes in the wall, using an 8mm drill
bit (not supplied), to a depth of approx 40mm.
Insert the wall plugs and tap flush with the wall surface and secure the wall brackets into
place.

20200317
CABINET INSTALLATION
Check the brackets fitted to the unit are fully tightened.
Lift the unit onto wall fitted brackets.
If any adjustment forward or backward / up or down is required this is possible via the
fitted adjusters on the inside of the unit.

20200317
CABINET INSTALLATION
After any adjustment of the unit has been made the basin can be fitted to the unit, by
applying a bead of silicone between the unit and basin to provide a seal and fixing for the
basin to the unit.
Also run a bead of silicone along the back edge of the base where it meets the wall.