Better Bathrooms BeBa 24913 User manual

Non-Illuminated Mirrors
BeBa_24913, BeBa_24914, BeBa_24915
BeBa_25541, BeBa_25542, BeBa_25543,
BeBa_25544
•Single-person assembly
•We always recommend using professional
tradespeople to install your product V1_30.10.2020

Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We're on a mission to bring you extraordinary bathroom products, for less. From modern
to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So,
you can fall in love with your space every single day.
As one of the UK's largest independent bathroom stores, we've received countless
awards; including the National Business Awards UK, the Digital Entrepreneur Awards and
being placed on The Sunday Times Fast Track 100.
We hope your new product exceeds your highest expectations. However, if you
experience any problems, please:
•call our friendly UK call centre on 03303903062 (9am-7pm Monday to Friday, or
10am-4pm Saturday and Sunday), or
•send us a message via [email protected]
Important information
•Please read these instructions thoroughly and retain for future reference
•Always check for pipes and wires before drilling the wall

Parts
Mirror x 1 Wall Screws x 3 Wall Plugs x 3
Only two screws and plugs are required for the installation
Tools required
Installation –Check the product for damage prior to installation
Before any drilling is carried out, please check for pipes and wires within the wall
which could be damaged.
Decide upon the hanging orientation of the mirror and measure between the fixing
points on the back of the mirror.
Mark this dimension on the wall, ensuring the
holes are level, using a spirit level.

Drill the wall at the marked points on the wall for your required orientation and
insert the wall plugs and tap until flush with the finished wall surface.
After fitting the wall plugs, insert the screw and tighten, DO NOT tighten the screw
fully to the wall surface.
Tighten the screw until it is between 2 -4 mm from the wall surface, as shown
below.
When the screw is correctly located, offer the rear of the mirror to the wall to
engage the bracket onto the screws.
When the bracket is hooked onto the screw gently push down on the mirror to
secure the mirror bracket fully onto the screw, as shown below.

Cleaning
Wipe the mirror clean and dry regularly, especially when the mirror is subject to steam or
splashes.
Do not use harsh chemicals or materials on the product, as this will damage the product
and invalidate your guarantee.
To clean and maintain the product, wipe using a clean damp cloth and wipe dry with a soft
cloth.