Better Bathrooms BeBa-26156 User manual

WALL MOUNTED MIRROR
BeBa-26156
600 x 600mm Brushed Gold
BeBa-26157
800 x 800mm Matt Black
BeBa-26158
800 x 800mm Brushed Gold
•DISTINCTIVE COLOUR OPTIONS
•ALUMINUM FRAME
•MODERN DESIGN TO FIT WITH ANY BATHROOM

2
CONGRATULATIONS ON YOUR PURCHASE
Our aim at Better Bathrooms is to bring you extraordinary bathroom products, for less.
If you’re after a modern, traditional, or a totally unique style bathroom, we have the fittings
and fixtures to bring your ideas to life, so you can fall in love with your space every day.
We hope you’re happy with your new product. But if you experience any problems, we’re
always here to help.
•Call our friendly UK call centre on 0871 244 0935
(Lines open 9am-4.30pm Monday to Friday, or 9am-2pm Saturday).
•Send us a message via betterbathrooms.com.
SAFETY
•This product may contain delicate parts –be careful during handling and
maintenance to avoid breakage.
•Ensure that the hanging location has been decided upon and marked clearly to avoid
unwanted damage to the wall due to incorrect positioning.
•Check that the mirror is not damaged prior to installation.
•Take care unpacking, do not use a sharp blade to open as this may damage the mirror
and void your warranty.
•Do not under any circumstances seal or adhere the mirror to the wall. Sealants and
adhesives may affect the mirrors rear surface and void your warranty.
•If sealing the gap between the mirror and the wall with silicon, ensure that a gap is
left at the bottom of the mirror to allow any water to escape.

3
PARTS SUPPLIED
PLEASE NOTE: It is the installers responsibility to ensure that the fittings are suitable for the type of wall.
Alternative fittings may be required (Not Supplied). If unsure professional advice should be sought.
TOOLS REQUIRED
WALL PLUGS (X2)
SCREWS M4 (X2)
TAPE MEASURE
SPIRIT LEVEL
ELECTRIC DRILL
SCREWDRIVER
HAMMER
8mm DRILL BIT
PENCIL

4
INSTALLATION
At the back of the mirror, there are 2 hanging hooks spaced
across the top. To hang the mirror, two holes are required in the
wall. Before drilling, ensure that no wires or pipes are behind the
wall. If unsure, seek professional advice.
1. Measure the distance between the centre of the two hanging points.
2. Make a note of the distance and mark their position on the wall. Use a spirit level
to ensure that the marks are level.
3. Drill the 2 holes into the wall at the position marked using a suitable drill bit.
4. Insert the wall plugs into the holes.
5. Insert the screws into the wall plugs, ensuring their heads are protruding by
approximately 3mm.
6. Check to ensure the screws line up correctly and the mirror can be safely hung
from them.
7. Carefully lower the mirror onto the 2 screws, ensuring that is secure and will not
slide.
CLEANING AND MAINTENANCE
Never use products containing bleach or abrasive cleaners, as these will have a
detrimental effect on the appearance and lifespan of the product.
Use a clean micro fiber cloth to clean the mirror.