Better Bathrooms BeBa 27532 User manual

1
TOUCH CONTROL LED MIRROR
BeBa_27532, BeBa_27533
BeBa_27534, BeBa_27535
BeBa_27535
•TOUCH CONTROL
•LED LIGHT
•IP44 INGRESS PROTECTION

2
CONGRATULATIONS ON YOUR PURCHASE
Our aim at Better Bathrooms is to bring you extraordinary bathroom products,
for less.
If you’re after a modern, traditional, or a totally unique style bathroom, we
have the fittings and fixtures to bring your ideas to life, so you can fall in love
with your space every day.
We hope your new product goes above and beyond your expectations.
However, should any problems occur, please:
•Log in to your account and contact our customer services team via your self-
service portal –betterbathrooms.com/CustomerAccount/Login
•Contact us via betterbathrooms.com/contact/contact-us
CONTENTS
SAFETY
3
BATHROOM ZONES
4
PARTS SUPPLIED
5
TOOLS REQUIRED
5
PRODUCT OVERVIEW
6
INSTALLING THE MIRROR
7
CONNECTING THE MIRROR
9
OPERATION
8
TECHNICAL SPECIFICATIONS
10

3
SAFETY
•The fitting should be installed by a qualified electrician.
•This fitting is only suitable for connection to a
220V~50Hz earthed supply in accordance with current IEE
wiring regulations, and should be installed in accordance
with local Building Regulations.
•This is for domestic, indoor use only.
•The fitting should be connected to a dedicated lighting
circuit which must be protected by a 5-amp fuse (or a 6-
amp miniature circuit breaker).
•Before installing the fitting ensure the mains supply is
switched off, and that the appropriate fuse is removed (or
appropriate circuit breaker is switched off) before
commencing installation. Ensure that measures are taken
to prevent the supply from being inadvertently
reconnected.
•If there is a “Minimum Distance” Label, please do not
allow Flammable Materials to rest within that distance from
the lamps.
•This product may contain delicate parts –be careful
during handling and maintenance to avoid breakage.
•If any modification is made to the fitting it will invalidate
the warranty and may render the product unsafe.
•A defective appliance may cause electric shock. Never
switch on a defective appliance. Unplug the appliance from
the mains or switch off at the circuit breaker in the fuse box
before seeking assistance.
•This product is IP54 rated, and so no part of the
installation is allowed to be within bathroom Zones 0,1.
Installation is permitted within Zone 2.
•This product must be earthed.

4
BATHROOM ZONES
Zone 0:
The interior of the bathtub or shower basin.
Zone 1:
The area around the bathtub or shower
basin up to a height of 2.25m above the
floor
Zone 2:
The area stretching to 0.6m outside the bath
or shower and above the bath or shower if
over 2.25m

5
PARTS LIST
TOOLS NEEDED FOR INSTALLATION
SCREW x4
D6 WALL PLUG x4
MIRROR x1
TAPE
MEASURE
SPIRIT
LEVEL
ELECTRIC
DRILL
FLAT HEAD
SCREWDRIVER
HAMMER

6
PRODUCT OVERVIEW
INSTALLATION
IMPORTANT: Before commencing installation, ensure that
there are no pipes or wires located behind the wall that you
will be drilling into.
•Ensure that the hanging location has been decided upon
and marked clearly to avoid unwanted damage in the wall due
to incorrect positioning.
•Check there the mirror is not damaged prior to installation.
•Take care unpacking, do not use a sharp blade to open as
this may damage the mirror and void your warranty.
ON/ OFF TOUCH
BUTTON
LIGHT BAR

7
HANGING THE MIRROR
The mirror comes with the option of hanging in a
landscape or portrait position. At the back of the
mirror, there are 4 key holes 2 on the vertical side
and 2 the horizontal side.
To hang the mirror, you will need to drill two holes
into the wall, ensuring that no wires or pipes are
behind the wall before commencing.
1. Measure the distance between the two key
holes.
2. Make a note of the distance and mark two
holes on the wall with the same distance between them as the
key holes. Use a spirit level to ensure that the holes are level.
3. Drill 2 screws into the wall, ensuring not to screw them in
all the way.
NOTE: Steps 4-5 are only to be performed after connecting the
mirror to the mains supply.
4. You will now be able to hang the mirror on the screws
using the key holes. Carefully lower the mirror onto the screws
lining up the screw with the key hole until it sits securely in the
hole at the top.
5. When the mirror has successfully been hung, make sure
to check that the screw will not come out of the hole in which it
rests.

8
CONNECTING THE MIRROR
To connect your mirror, it must be first be connected to the
mains supply.
IMPORTANT: Installation must only be carried out by a
qualified professional or electrician.
At the back of your mirror is a length of 3 core cable which is
connected to the mirror. After fitting the fuse spur which will be
used to connect the mirror to the mains, identify the EARTH
NEUTRAL and LIVE wires in both the spur and the mirror.
Connect the Earth Live and Neutral to the corresponding wires
from the mains. When connecting the cables, ensure that no
connections are lose, and that proper safety regulations have
been followed. Leave enough cable to make moving and
hanging the mirror easier.
After connection, the mirror should be hung using the steps 4-5
in the “HANGING THE MIRROR SECTION”.

9
OPERATION
When the mirror is connected and hung
securely onto the wall, turn the mains
power back on and the mirror will be
ready to use.
To operate, use the touch button on the
front of the mirror, it is located at the
bottom. Touch the button gently to turn
on, and press again to switch off.
SHAVER SOCKET
Your mirror comes with a shaver socket located
on the inside of the mirror. This socket is
designed for use only with shavers and other
low voltage devices designed to be powered by
a shaver socket.
Once the mirror is connected to the mains, the
shaver socket is ready to use.

10
TECHNICAL SPECIFICATION
Model
BeBa_27532
BeBa_27533
BeBa_27534
BeBa_27535
WxHxD (mm)
900x700x55
1200x600x55
500x700x55
600x800x55
Net Weight
(Kg)
10.5
12
6.8
8.6
Power Cord
length (cm)
80
100
65
65
Rated Power
(W)
55
50
34
52
Input
220 V - 240 V 50 Hz
This product contains a light source of energy efficiency class F.
DISPOSAL
Recycling facilities are now available for all customers at which you can
deposit your old electrical products. Customers will be able to take any old
electrical equipment to participating sites run by their local councils.
Please remember that this equipment will be further handled during the
recycling process, so please be considerate when depositing your
equipment. Please contact the local council for details of your local
household waste recycling centers.
At the time of printing the product contains no substances listed within Annex XIV of the
Reach Regulations (EC) 1907/2006. In accordance with Article 59 of the same regulation
the following substances are contained within the product at permitted levels: Cadmium.
As a responsible manufacturer the regulations are monitored to ensure continued
compliance. Further information can be provided upon request.