Better Homes and Gardens BH12-084-499-04 User manual

Page 1 of 8
NEED HELP? For help with assembly or if you are missing a part, please visit Whalen Furniture at www.whalenstyle.com or call
866-942-5362 (8:30 a.m. to 4:30 p.m., PST, Monday - Friday). Or e-mail to: [email protected].
For returns, visit www.walmart.com and follow the steps to return a product.
Dalton Park 5pc Dining Set
Stock #: BH12-084-499-04
Lot Number:
Date Purchased:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
DO NOT RETURN THE PRODUCT TO THE STORE; individual stores do not stock
parts. If a part is missing or damaged, call our toll-free customer service line. We will
gladly ship your replacement parts FREE of charge.
STOP
Date 2017-08-18 Rev. 0001-B Factory: ZHIVIE

Page 2 of 8
Dalton Park 5pc Dining Set
Counter Height Dining Set Parts
AB
Counter Height Dining Set Hardware
1
4
COMPONENTS
PART QTY.
ATable Top 1
BMounting Panel 2
CTable Leg 4
DShelf Frame 2
EChair Backrest 4
FCushion 4
GFront Leg Assembly 4
HSide Rail 8
ILeft Side Stretcher 4
JRight Side Stretcher 4
CD
EF
GH
IJ
2
3
5678
10
Get Ready!
We assembled every piece ourselves to make sure it’s truly easy.
●Please read all the instructions before starting.
●Carefully unpack and identify each part, component, and piece of
hardware to make sure you have everything you need for assembly.
Lay out each part on a soft, uncluttered surface.
9
HARDWARE
M6x55mm Bolt 12+1 extra
M4x25mm Screw 8+1 extra
M4x32mm Screw 16+1 extra
M4x38mm Screw 16+1 extra
Lock Washer 36+1 extra
Flat Washer 36+1 extra
Wood Dowel 2
Touch-up Pen 1
M4 Hex Wrench 2
M6x50mm Bolt 24+1 extra
1
3
4
5
6
7
8
9
2
10
Warning: Includes small
parts with sharp edges
that could be hazardous
to children.
NEED HELP? For help with assembly or if you are missing a part, please call Whalen Furniture Manufacturing 866-942-5362
(8:30 a.m. to 4:30 p.m., PST, Monday - Friday) or e-mail to: [email protected].

Page 3 of 8
Dalton Park 5pc Dining Set
Step 1:
HARDWARE
PART PART PART PART
M6x55mm Bolt x 8 Lock Washer x 8 Flat Washer x 8 Hex Wrench x 1
1569
●Unpack the unit and confirm that you have all the hardware and required parts.
●Align and attach the Shelf Frames (D) to the cutouts of Table Legs (C). Make certain the
aprons on Shelf Frames will face the floor after assembly. Insert the 55 mm Bolts (1) with
Lock Washers (5) and Flat Washers (6) through the corner blocks and screw into the
threaded inserts in the Legs. Tighten the bolts with the enclosed hex wrench .
NEED HELP? For help with assembly or if you are missing a part, please call Whalen Furniture Manufacturing 866-942-5362
(8:30 a.m. to 4:30 p.m., PST, Monday - Friday) or e-mail to: [email protected].

Page 4 of 8
Dalton Park 5pc Dining Set
Step 2:
HARDWARE
PART PART PART PART
M6x55mm Bolt x 4 Lock Washer x 4 Flat Washer x 4 Hex Wrench x 1
1569
●Stand the previous assembly upright.
●Align and attach the Mounting Panels (B) onto the top of Table Legs (C) using four 55 mm
Bolts (1) with Lock Washers (5) and Flat Washers (6) through the countersunk holes on the
Mounting Panels and screw into the threaded inserts in the Table Legs. Tightly fasten the
bolts with the enclosed hex wrench.
NEED HELP? For help with assembly or if you are missing a part, please call Whalen Furniture Manufacturing 866-942-5362
(8:30 a.m. to 4:30 p.m., PST, Monday - Friday) or e-mail to: [email protected].

Page 5 of 8
Dalton Park 5pc Dining Set
●Position the Table Top (A) upside down on a level and protective surface as shown.
●Insert 2 Wood Dowels (7) into the middle holes on the Table Top (A). Flip the assembled
frame upside down and position the Mounting Panels (B) onto the inserted Wood Dowels.
●Center and attach the Mounting Panels (B) to the Table Top (A) by inserting and screwing
eight 25mm Screws (2) through the pre-drilled holes on the Mounting Panels. Tightly fasten
the screws with a Phillips Screwdriver.
●Ask for assistance to stand the Table upright.
Step 3:
HARDWARE
PART PART
M4 x 25mm Screw x 8 Wood Dowel x 2
27
NEED HELP? For help with assembly or if you are missing a part, please call Whalen Furniture Manufacturing 866-942-5362
(8:30 a.m. to 4:30 p.m., PST, Monday - Friday) or e-mail to: [email protected].

Page 6 of 8
Dalton Park 5pc Dining Set
Step 4:
HARDWARE
PART PART PART PART
M6 x 50mm Bolt x 6 Lock Washer x 6 Flat Washer x 6 M4 x 38mm Screw x 4
10 6
5
●Lay one Chair Backrest (E) on a level and protective surface with the threaded inserts facing
up.
●Attach two Side Rails (H) onto the Backrest (E) with the end wood dowel fully inserted into
the non-threaded hole. Make sure the pre-drilled slant holes face inward. Insert the 50 mm
provided hex wrench .
●Fully insert the tenon of Left and Right Side Stretchers (I and J) into the mortises on the
on
the stretchers will face the floor after assembly. Insert and screw the 38 mm Screws (4) into
the pre-drilled holes underneath the stretcher. Loosely tighten with a Phillips screwdriver.
●Repeat the procedure to attach the Front Leg Assembly (G) at opposite end.
NOTE: DO NOT fully tighten all the screws and bolts until the chair has been adjusted and
all the legs are levelled so that they do not wobble. Once adjusted then go back and tighten
while making sure that the unit remains level.
NEED HELP? For help with assembly or if you are missing a part, please call Whalen Furniture Manufacturing 866-942-5362
(8:30 a.m. to 4:30 p.m., PST, Monday - Friday) or e-mail to: [email protected].
4

Page 7 of 8
Dalton Park 5pc Dining Set
●Stand assembled chair upright on a flat surface. Press down Side Rails (H) to even all legs.
Now, tightly fasten all the Bolts and Screws.
●Flip last assembly upside down and attach to the bottom of Cushion (F), secure with four
32mm Screws (3) through the pre-drilled holes on Front Leg Assembly (G) and Side Rails
(H). Tighten with a Phillips screwdriver.
●Stand the chair upright.
●Repeat the same procedure to assemble the other chairs.
Step 5:
HARDWARE
PART
M4 x 32mm Screw x 4
3
Support
surface
NEED HELP? For help with assembly or if you are missing a part, please call Whalen Furniture Manufacturing 866-942-5362
(8:30 a.m. to 4:30 p.m., PST, Monday - Friday) or e-mail to: [email protected].

Page 8 of 8
Dalton Park 5pc Dining Set
Weight limit:
400 lbs. /181.4 kgs.
Weight limit:
100 lbs. /45.4 kgs.
DO NOT RETURN THE PRODUCT TO THE STORE; individual stores do not stock
parts. If a part is missing or damaged, call our toll-free customer service line. We will
gladly ship your replacement parts FREE of charge.
STOP
Weight limit:
300 lbs. /136.1 kgs.
NEED HELP? For help with assembly or if you are missing a part, please call Whalen Furniture Manufacturing 866-942-5362
(8:30 a.m. to 4:30 p.m., PST, Monday - Friday) or e-mail to: [email protected].
WARNINGS
This unit is intended for use only with the maximum weights indicated. Use with products heavier than the maximum
weights indicated may result in instability causing possible injury.
Care and Maintenance
●Use a soft, clean cloth that will not scratch the surface when dusting.
●Use of furniture polish is not necessary. Should you choose to use polish, test in an inconspicuous are first.
●Using solvents of any kind on your furniture may damage the finish.
●Never use water to clean your furniture as it may cause damage to the finish.
●Always use coasters under beverage glasses and flowerpots.
●Liquid spills should be removed immediately. Using a soft, clean cloth, blot the spill gently. Avoid rubbing.
●Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spot-
ting within the furniture finish.
●Stains or marks from crayons or ink markers will be difficult to remove.
●In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a profes-
sional to repair your furniture.
●Check bolts/screws periodically and tighten them if necessary.
Further Advice about Wood Furniture Care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can
cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from direct sunlight as sun
may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Follow the important and helpful tips that will
enhance your furniture as it ages.
A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or ship-
ping.
We hope you enjoy your purchase for many years.
Thank you for your purchase!
QUALITY GUARANTEE
We are confident that you will be delighted with your Whalen Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it
for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest ex-
pectations. We guarantee that you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from State to State.
Customer Service: 866-942-5362
8:30 a.m. - 4:30 p.m., PST, Monday to Friday
www.whalenstyle.com