Beurer HK 35 User manual

EN Heat pad
Instruction for Use
HK 63
HK 35
HK 25

2
Contents
Explanation of symbols
Read the
instructions! Do not wash
Machine-washable
at 40°C
30°C extra gentle
washing program
Do not insert pins! Do not bleach
Do not tumble dry
Do not iron
Do not use folded or
rucked! Iron at medium temperature
Do not dry-clean
Not to be used by
very young children
(0 - 3 years).
The textiles used for
this device meet the
stringent human eco-
logical requirements
of Oeko-Tex Standard
100, as verified by
Hohenstein Research
Institute.
20
PAP
Dispose of packag-
ing in an environmen-
tally friendly manner.
1. Items included in the package ...........................3
1.1 Description ..................................................3
2. Important instructions
Retain for future use ..........................................3
3. Intended use.......................................................5
4. Operation............................................................5
4.1 Safety ...........................................................5
4.2 Initial use ......................................................5
4.3 Switching on.................................................5
4.4 Setting the temperature..............................5
4.5 Automatic switch-o ..................................6
4.6 Switching o...............................................6
5. Cleaning and maintenance...............................6
6. Storage.............................................................6
7. Disposal............................................................7
8. What if there are problems? .............................7
9. Technical data ..................................................7
10. Warranty/service..............................................7
ENGLISH

3
WARNING: Warning of risks of injury or health hazards
CAUTION: Safety information about possible damage to
appliance/accessories.
NOTE: Important information.
1. Items included in the package
1Heating pad
1 Cover
1Controller
1Instructions for use
1.1 Description
1. Mains plug
2. Mains cable
3. Controller
4. Illuminated display for temperature settings
5. Sliding switch for ON/OFF and temperature
settings
6. Plug-in coupling
2. Important instructions
Retain for future use
WARNING
• Non-observance of the following notes may result in personal injury
or material damage (electric shock, skin burns, fire). The following
safety and hazard information is not only intended to protect your
health and the health of others, it should also protect the product.
For this reason, pay attention to these safety notes and include these
instructions when handing over the product to others.
• This heating pad must not be used by people who are not sensitive
to heat or by vulnerable people who may not be able to react to over-
heating (e.g. diabetics, persons with skin changes related to illness or
persons with scarred skin in the area where the pad is to be applied,
after taking any pain-relieving medication or alcohol).
• This heating pad may not be used by very young children (0-3 years
old) as they are unable to respond to overheating.
• This heating pad may not be used by young children (3-8 years old)
unless the controller has been set by a parent or responsible adult
0
1
2
3
1
2
3
45
6

4
and the child has been given adequate instructions on how to use the
heating pad safely.
• This heating pad may be used by children over the age of 8 and by
people with reduced physical, sensory or mental skills or a lack of
experience or knowledge, provided that they are supervised and have
been instructed on how to use the heating pad safely, and are fully
aware of the consequent risks of use.
• Children must not play with the heating pad.
• Cleaning and user maintenance must not be performed by children
unless supervised.
• This heating pad is not designed for use in hospitals.
• Do not insert needles.
• Do not use when folded or bunched up.
• Do not use if wet.
• This heating pad may only be used in conjunction with the controller
specified on the label.
• The electrical and magnetic fields emitted by this heating pad may
interfere with the function of a pacemaker. However, they are still well
within the limits: electrical field strength: max. 5000 V/m, magnetic
field strength: max. 80 A/m, magnetic flux density: max. 0.1 millitesla.
Please consult your doctor and the manufacturer of your pacemaker
before using this heating pad.
• Do not pull, twist or make sharp bends in the cables.
• Please check this heating pad frequently for signs of wear and tear or
damage.
If any such signs are evident, if the heating pad has been used incor-
rectly or if it no longer heats up, it must be checked by the manufac-
turer before being switched on again.
• If the mains connection cable of this device is damaged, it must be
disposed of. If it cannot be removed, the device must be disposed of.
• While the heating pad is switched on, the following conditions must
be observed:
– Objects must not be placed on the pad (e.g. suitcase or washing
basket).
– Heat sources, such as hot water bottles, heating pads or similar,
must not be placed on the pad.
• The electronic components in the controller warm up when the
heating pad is in use. For this reason, the controller must never be
covered or placed on the heating pad when it is in use.
• Always observe the notes on operation (section 4), cleaning and
maintenance (section 5) and storage (section 6).

5
• If you should have any questions about using our devices, please
contact Customer Services.
3. Intended use
IMPORTANT
This heating pad is only designed to warm up the human body. To avoid damage to the film cover and/
or the insulation of the cables, do not use the heating pad in conjunction with essential oils or lotions.
NOTE HK 63
The heating pad is fitted with 6 integrated permanent magnets that produce a homogenous magnetic
field for magnetic field applications.
4. Operation
4.1 Safety
CAUTION
The heating pad is fitted with a SAFETY SYSTEM. This sensor technology provides protection against
overheating across the entire surface of the heating pad with an automatic switch-off in the event of a
fault. If the SAFETY SYSTEM has switched off the heating pad, the temperature settings are no longer
illuminated when switched on. Please note that for safety reasons, the heating pad can no longer be
operated after a fault has occurred and must be sent to the specified service address.
Do not connect the defective heat pad with another controller of the same type. This would trigger a
permanent switch-off via the controller safety system.
4.2 Initial use
IMPORTANT
Ensure that the heating pad will not bunch up or become folded during use.
•First, connect the controller to the heating pad by inserting the plug-in coupling.
•Then plug the mains plug into the socket.
4.3 Switching on
To switch the heating pad on, set the sliding switch for ON/OFF and temperature settings to setting 1, 2 or 3.
The temperature settings (4) are illuminated when switched on.
4.4 Setting the temperature
Level 0: OFF
Level 1: minimum heat
Level 2: medium heat
Level 3: maximum heat
NOTE
• The fastest way to warm up the heating pad is to initially set the highest temperature setting.
NOTE HK 35, HK 63
These heating pads have a fast heating function, which allows the pad to warm up faster
in the first 10 minutes.

6
WARNING
If the heating pad is being used over several hours, we recommend
that you set the lowest temperature setting on the controller to avoid
overheating the heated body part, which may lead to burns to the skin.
4.5 Automatic switch-off
This heating pad is equipped with an automatic switch-off function. This turns off the heat sup-
ply approx. 90 minutes after the initial use of the heating pad. The temperature setting display
then starts to flash. So that the heating pad can be switched back on, the sliding switch for ON/
OFF and temperature settings (5) must first be set to setting “0” (OFF). After about 5 seconds
it is possible to switch it on again.
4.6 Switching off
To switch the heating pad off, set the sliding switch for ON/OFF and temperature settings to setting “0” (OFF).
The temperature settings are then no longer illuminated.
NOTE:
If the heating pad is not in use, switch the sliding switch for ON/OFF and temperature settings to setting
“0” (OFF) and unplug the mains plug from the socket. Then disconnect the controller from the heating
pad by unplugging the plug-in coupling.
5. Cleaning and maintenance
WARNING
Before cleaning, always remove the mains plug from the socket first. Then disconnect the controller
from the heating pad by unplugging the plug-in coupling. Otherwise there is a risk of electric shock.
IMPORTANT
•The controller must never come into contact with water or other liquids, as this may cause damage.
To clean the controller, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
The textile cover can be cleaned in accordance with the symbols on the label and must be removed from
the heating pad prior to cleaning.
To clean the plastic protective cover on the heating pad, use a damp cloth.
IMPORTANT
•Please note that the actual heating pad may not be machine-washed, spun or machine dried,
chemically cleaned, wrung out, pressed or ironed. Otherwise the heating pad may be damaged.
WARNING
• Never switch the heating pad on to dry it! Otherwise there is a risk of electric shock.
6. Storage
If you do not plan to use the heating pad for a long period of time, we recommend that you store it in the
original packaging. For this purpose, disconnect the controller from the heating pad by unplugging the
plug-in coupling.
90 min
STOP

7
IMPORTANT
Please allow the heating pad to cool down before storing. Otherwise the
heating pad may be damaged. To avoid sharp folds in the heating pad,
do not place any objects on top of it while it is being stored.
7. Disposal
For environmental reasons, do not dispose of the device in the household waste at the end of
its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the
device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If
you have any questions, please contact the local authorities responsible for waste disposal.
8. What if there are problems?
Problem Cause Solution
The temperature settings are not illuminated while
- the controller is properly connected to the heating pad
- the mains plug is connected to a working socket
- the sliding switch is set to 1, 2 or 3
The safety system has
switched the heating
pad off permanently.
Send the heating pad
and the controller for
servicing.
9. Technical data
See rating plate stamp on the heating pad.
10. Warranty/service
In case of a claim under the warranty please contact your local dealer or the local representation which is
mentioned in the list “service international”.
In case of returning the unit please add a copy of your receipt and a short report of the defect.
The following warranty terms shall apply:
1. The warranty period for BEURER products is either 3 years or- if longer- the country specific warranty
period from date of Purchase.
In case of a warranty claim, the date of purchase has to be proven by means of the sales receipt or invoice.
2. Repairs (complete unit or parts of the unit) do not extend the warranty period.
3. The warranty shall not be valid for damages because of
a. improper treatment, e.g. nonobservance of the user instructions.
b. repairs or tampering by the customer or unauthorised third parties.
c. transport from the manufacturer to the consumer or during transport to the service centre.
d. The warranty shall not be valid for accessories which are subject to normal wear and tear (cuff, batteries
etc.).
4. Liability for direct or indirect consequential losses caused by the unit are excluded even if the damage
to the unit is accepted as a warranty claim.
Subject to errors and changes

8
HK25-35-63_2018-11-12_01_IM2_BEU_EN
Beurer GmbH • Söflinger Str. 218 • 89077 Ulm, Germany
www.beurer.com • www.beurer-healthguide.com