BGS technic 8366 User manual

SW-Stahl und Werkzeugvertriebs GmbH Tel. [phone] / 46438-0
F56essartSresukreveL ax +49 (0) 2191 / 46438-40
ed.lhatsws@ofni:liaM-EdiehcsmeR79824-D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: [phone]
Fax.: [phone]
[email protected]
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Art. 8366
Working Platform
SAFETY INSTRUCTIONS
•Keep the working platform clean of dirt, oil, soapy water, etc. to prevent slipping hazard and
personal injuries.
•Do only use the working platform on even, clean and slip-free surfaces as the working platform
might skid or even overturn on uneven, inclined or slippery surfaces.
•Carry out a visual check before each and every use. If you detect cracks, kinks, dents or any
other damages, mark the working platform as damaged, store it safely out of reach and only put it
back to use after the repair of the detected damages.
USE
Unfold
1. Unfold the two side arms and lock them with the locking hooks.
The locking hooks are positioned diagonally opposite on the right and left side arm, marked as A
and B in Fig. 1.
2. Push the locking hook (D) over the locking pin (C) (Fig.2).
Caution: the locking plate (E) has to snap into place behind the locking pin.
Fold
1. If you want to stow away the working platform after use or move it to some other place, please
unlock the side arms by lifting the locking plate (E) off the locking pin (C) and push the locking
hook sideways.
unlocked
locked
A
B
fig
.1
fig
.
2
fig
.3
C
D
E
SPECIFICATION
Material: aluminium
Platform area: 760 x 300 mm
Platform height: 495 mm
Footprint spread: 1090 x 415 mm
Dimensions (folded): 790 x 413 x 165 mm
Max. load: 100 kg
Weight: 3.6 kg

SW-Stahl und Werkzeugvertriebs GmbH Tel. [phone] / 46438-0
F56essartSresukreveL ax +49 (0) 2191 / 46438-40
ed.lhatsws@ofni:liaM-EdiehcsmeR79824-D
CE-Erklärung
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: [phone]
Fax.: [phone]
[email protected]
www.bgstechnic.com
EU-KONFORMITÄTSERKLÄRUNG
EC DECLARATION OF CONFORMITY
DÉCLARATION„CE“ DE CONFORMITE
DECLARATION DE CONFORMIDAD UE
Wir erklären in alleiniger Verantwortung, dass die Bauart des Produktes:
We declare that the following designated product:
Nous déclarons sous propre responsabilité que ce produit:
Declaramos bajo nuestra sola responsabilidad que este producto:
folgenden einschlägigen Bestimmungen entspricht:
complies with the requirements of the:
est en conformité avec les réglementations ci-dessous:
esta conforme a las normas:
Angewandte Normen:

Norme appliquée:
Normas aplicadas:
ppa.
Frank Schottke, Prokurist
BGS technic KG, Bandwirkerstrasse 3, D-42929 Wermelskirchen
Wermelskirchen, den
Arbeitspodest, faltbar ( BGS Art. 8366 )
Working Platform, Foldable
Plateau de travail pliant
Plataforma de trabajo plegable
Council Directive 98/34/EC
EN 131-1:2007
EN 131-2:2010
EN 131-3:2007
EN 131-4:2007
Registration No.: EPTC-EM S1105830 / EMJW03
Test Report No.: EPTC-EM S1105830
09.05.2016