Binks STEADI-GRIP SG-2 User manual

INTRODUCTION
Binks Steadi-Grip “SG-2” Pressure Cup is ideal for component
spraying and industrial applications where small batch production
spraying is required. The 2 qt. capacity is sufficient to complete
large spray jobs without refilling the cup. Its lightweight and
rugged construction is excellent for portability allowing the
operator to make fluid and air control adjustments quickly and
efficiently at the spray station.
The internal construction is designed for waterborne and solvent
base materials.
Other features include:
•Stainless steel pick-up tube, fluid fittings and removable
plastic liner makes it corrosion resistant.
•“Wide-mouth” opening allows easy cleaning, plastic liner
removal and quick color change.
•Positive grip carrying handle for operator comfort.
•Wide stainless steel base for stability and corrosion
resistance.
•0-15 psig fluid pressure range.
•Optional 0-40 psig pressure kit available for high viscosity
fluids.
•Fluid agitator on model 80-351 for metallics and paints
requiring continuous agitation
Binks STEADI-GRIP “SG-2”
2 QT. PRESSURE CUPS
Model No. 80-350 (Standard)
Model No. 80-351•(with Agitator)
SPECIFICATIONS
MAX. WORKING PRESSURE . . . . . . . . . . . .50 psig 3.5 KG/cm2
OVERALL HEIGHT
WITH AUXILIARY HANDLE . . . . . . . . . .16 9/16 in. 42.06 cm
WITHOUT AUXILIARY HANDLE . . . . . . .11 3/4 in. 29.85 cm
BASE DIAMETER . . . . . . . . . . . . . . . . . . . .6 in. 15.24 cm
DIA. ACROSS CLOSED CLAMPS . . . . . . . . . .8 1/16 in. 20.47 cm
DIA. ACROSS OPEN CLAMPS . . . . . . . . . . .8 1/16 in. 20.47 cm
AIR INLET & OUTLET CONNECTION SIZE . .1/4 NPS (m) --
FLUID OUTLET CONNECTION SIZE . . . . . . .3/8 NPS (m) --
FLUID CAPACITY . . . . . . . . . . . . . . . . . . . . .2 Qts. (U.S.) 1.9 Liters
WEIGHT
STANDARD UNIT . . . . . . . . . . . . . . . . . . .4 lb.13oz. 2.18 kg.
UNIT WITH AGITATOR . . . . . . . . . . . . . .5lb.6oz. 2.44 kg.
Part
Sheet
77-2658R-4
Replaces
Part Sheet
2658R-3
MODEL NO. 80-350 (Standard)
MODEL NO. 80-351•(with Agitator)
•Available from Industrial Finishing distributors only.
WARNING
A ll air and fluid pressure in the system must be relieved
before servicing the cup and before cup is filled or cleaned.
Attempting to service the cup while pressurized could
result in damage to components or personal injury.
!

Set up the Steadi-Grip “SG2” with the CONVENTIONAL
or HVLP gun along with at least 5 ft. of air and fluid hose.
Attach air hose from extractor to air inlet on handle of steadi-
grip assembly. Pour paint into canister with liner. Re-attach lid
to canister and firmly tighten four knobs over canister lid. Set
air pressure from air regulator mounted on extractor and fluid
pressure by adjusting fluid pressure adjustment knob on cup
handle.
SETUP AND OPERATION
Refer to “TYPICAL INSTALLATION” drawing below
TYPICAL INSTALLATION
2
WARNING
Chlorinated solvents and aluminum are incompatible and
will cause an adverse chemical reaction, possibly resulting in
bodily injury. Under NO circumstances should chlorinated
solvents be used with the “SG2” pressure cup with agitator
(80-351). With the standard “SG2” pressure cup, use chlori-
nated solvents only when using plastic liner (80-355).
!
NOTE
Before refilling canister with paint, shut off air supply to the
cup and release pressure from canister by rotating pressure
relief knob counterclockwise.
CAUTION
Do not exceed 100 PSIG input air pressure into the cup.
Excessive pressure could damage components.
!
Spray
Gun Air Hose
Air
Regulator
Air Hose
1/4" NPS(m)
Spray Gun
Air Inlet
1/4" NPS(m)
Main Air Inlet
3/8" NPS(m)
Spray Gun
Fluid Inlet
Oil and
Water
Extractor
Air
Controller
Fluid Hose Steady-Grip 2 Cup
Pressure Relief Knob
Fluid Pressure
Adjustment Knob

The first requirement for a good resultant finish is the proper
handling of the gun. The gun should be held perpendicular to
the surface being covered and moved parallel with it.
The stroke should be started before the trigger is pulled,
and the trigger should be released before the stroke is ended.
This gives accurate control of the gun and material.
The distance between the gun and surface should be 6 to 10
inches depending on material and atomizing pressure. The
material deposited should always be even and wet. Lap each
stroke over the preceding stroke to obtain a uniform finish.
SPRAY TECHNIQUE
98-1198•OUTFIT
MACH 1SL Gun with Standard cup
consisting of:
80-350 STEADI-GRIP 2 QT. PRESSURE POT (Std.).
73-125 AIR FLOW CONTROLLER,
Mounted on gun inlet.
MACH 1SL HANDGUN with 92 FLUID NOZZLE
by 94P AIRCAP ASSEMBLY.
71-1201 AIR HOSE, 3/8" x 5' Long.
71-3380 FLUID HOSE, 1/4" x 5' Long.
•Available from Industrial Finishing distributors only.
Binks STEADI- GRIP 2 OUTFIT
HVLP GUN OUTFITS
3
RIGHT WRONG
6 to 12 inches
Start
Stroke
Pull
Trigger
Release
Trigger
End of
Stroke
Coating should be even
and wet when spraying Coating will
be light at
this point
Coating will
be heavy at
this point
Travel of Gun

MODEL 80-350 PRESSURE CUP (Standard)
4
7•
7•
10 12
56
8
911
21
19
4
3
2
1
13
14
16
18
17
29
30
•28
31
33
27
25
26
23
24
21
20
22
15
32
•
34
35•
36•
37•
38•
•Items NOT available separately.

PART
NO. DESCRIPTION QTY.
80-356 CANISTER LINER QUANTITY PACK ............ 12 /pk.
80-404AGITATOR CUP CONVERSION KIT .............. 1
73-125 AIR CONTROLLER (for atomizing air) .............. 1
80-352 HIGH FLUID PRESSURE CONVERSION KIT
(0-40psig) ...................................................... 1
80-353 PRESSURE CUP REPAIR KIT ........................ 1
80-354AGITATOR REPAIR KIT ................................ 1
80-390KNOB REPLACEMENT KIT............................ 1
Available from Industrial Finishing distributors only.
•Item NOT available separately.
Available only as a quantity pack.
ITEM PART
NO. NO. DESCRIPTION QTY.
185-46 SPRING CAP .......................... 1
285-257SPRING .................................. 1
385-184 CAP........................................ 1
485-267WASHER ................................ 1
585-183-5DIAPHRAGM ........................ 1
685-262 DIAPHRAGM RETAINER........ 1
720-6683● O-RING 2-003 EPR .................... 2
885-181 SEAT ...................................... 1
985-266SEAL ...................................... 1
10 85-259 VALVE .................................... 1
11 54-1637SPRING .................................. 1
12 85-84 POP VALVE (Set at 15 psig) ...... 1
13 80-360CHECK VALVE ASSEMBLY .... 1
14 80-361CHECK VALVE BODY ............ 1
15 20-3619O-RING .................................. 1
16 20-2183BALL 3/16 Dia. ........................ 1
17 80-362CHECK VALVE SPRING .......... 1
18 20-6161SET SCREW 1/4-28 X 1/4
Headless Hex .......................... 1
19 GA-313 GAUGE (0-15 psig).................... 1
20 80-365 STEADI-GRIP HANDLE .......... 1
21 54-768 AIR CONNECTION 1/4 NPS (m) 2
22 80-373HANDLE GASKET .................. 1
23 80-367AUXILIARY HANDLE NUT .... 1
24 80-364 AUXILIARY HANDLE ............ 1
PARTS LIST
(When ordering, please specify Part No.)
ACCESSORIES
(Not furnished. Please order separately)
PART
NO. DESCRIPTION QTY.
85-257SPRING .......................................... 1
85-183-5DIAPHRAGM ................................ 1
20-6683•O-RING 2-003 EPR ............................ 2
85-266SEAL .............................................. 1
54-1637SPRING .......................................... 1
85-84 POP VALVE 15psi ............................ 1
80-360 CHECK VALVE ASSEMBLY ............ 1
80-373HANDLE GASKET .......................... 1
80-388 FLUID TUBE SEAL.......................... 1
80-392 LID GASKET (E.P.D.M.) .................... 1
80-353 PRESSURE CUP REPAIR KIT
(Models 80-350, 80-351
Steadi-Grip SG-2 Pressure Cups)
ITEM PART
NO. NO. DESCRIPTION QTY.
25 80-372 VENT KNOB .......................... 1
26 80-385 FLUID TUBE ASSEMBLY ........ 1
27 80-388FLUID TUBE SEAL.................. 1
28 80-389FLUID TUBE NUT .................. 1
29 80-370 CANISTER LID Standard .......... 1
30 20-6582• SCREW 1/4-20 X 5/8
Flat Head Socket ...................... 2
31 80-392 LID GASKET (E.P.D.M.).............. 1
32 80-355DISPOSABLE CAN LINER
See 80-356 below .................... 1
33 80-375 2 QT. CANISTER ASSEMBLY.. 1
34 80-382†RETAINER RING .................... 4
35 80-380•† KNOB .................................... 4
36 80-381•† SWIVEL .................................. 4
37 20-4870•†PIN ........................................ 4
38 † CANISTER .............................. 1
5
MODEL 80-350 PRESSURE CUP (Standard)
Includes 80-353 Repair Kit.
Available only as a quantity pack.
•Items NOT available separately.
Indicates parts are included in Spare Parts Kit No. 80-390
(1 each).
†Indicates parts are included in 80-375 Assembly (33).
Available from Industrial Finishing distributors only.
NOTE
To convert to High Pressure Kit (0-40 psig), see page 8.

Model 80-351 PRESSURE CUP WITH AGITATOR▲
6
69
70
71
72
73
7
58911
6
4
3
2
1
36
35
34 21
19
33 26
27
25
28
30
24
21
20
39
22 37 38
40
36
29
31 32
23
10 12
7
18
16
13
14
67

17
15 42
43 41
44
68
63

62
64
66

65

61
59
58
57

55

55

56
45
53 54
52
51

49
50
47
48
46
60

Items NOT available separately.


ITEM PART
NO. NO. DESCRIPTION QTY.
185-46 SPRING CAP 1
285-257▼SPRING ........................................ 1
385-184 CAP .............................................. 1
485-267▼WASHER ...................................... 1
585-183-5▼DIAPHRAGM................................ 1
685-262 DIAPHRAGM RETAINER .............. 1
720-6683▼O-RING 2-003 EPR .......................... 2
885-181 SEAT ............................................ 1
985-266▼SEAL ............................................ 1
10 85-259 VALVE .......................................... 1
11 54-1637▼SPRING ........................................ 1
12 85-84▼POP VALVE (Set at 15 psig) .............. 1
13 80-360▼CHECK VALVE ASSEMBLY .......... 1
14 80-361 CHECK VALVE BODY .................. 1
15 20-3619 O-RING ........................................ 1
16 20-2183 BALL, 3/16 Dia. ............................ 1
17 80-362 CHECK VALVE SPRING ................ 1
18 20-6161 SET SCREW 1/4-28 x 1/4"
Headless Hex .................................. 1
19 GA-313 GAUGE (0-15 psig) .......................... 1
20 80-365 STEADI-GRIP HANDLE ................ 1
21 54-768 AIR CONNECTION........................ 2
22 80-373▼HANDLE GASKET ........................ 1
23 80-367 AUXILIARY HANDLE NUT .......... 1
24 80-364 AUXILIARY HANDLE.................... 1
25 82-740
AIR CONTROL VALVE ASSEMBLY .. 1
26 81-307 ◆BARBED CONNECTOR ................ 1
27 82-745 ◆VALVE BODY ASSEMBLY ............ 1
28 20-3236 ◆•O-RING ........................................ 1
29 82-747 ◆STEM ............................................ 1
30 73-44 ◆NUT .............................................. 1
31 73-46 ◆CAP .............................................. 1
32 20-2606 ◆SCREW 8-32 x 3/8" Oval Hd. .............. 1
33 54-3929 TUBE 6-1/2" Nylon .......................... 1
34 81-307 BARBED CONNECTOR ................ 1
35 82-728 INLET FITTING.............................. 1
36 82-730•GASKET........................................ 2
37 82-729 EXHAUST FITTING ...................... 1
38 80-372 VENT KNOB ................................ 1
39 80-385 FLUID TUBE ASSEMBLY .............. 1
PARTS LIST
(When ordering, please specify Part No.)
ITEM PART
NO. NO. DESCRIPTION QTY.
40 80-388▼FLUID TUBE SEAL ........................ 1
41 80-389 FLUID TUBE NUT .......................... 1
42 80-369 CANISTER LID Agitator .................. 1
43 20-6582SCREW 1/4-20 x 5/8" Flat Hd.Socket .... 2
44 80-392▼LID GASKET (E.P.D.M.) .................... 1
45 80-405
STEADI-GRIP AGITATOR ASSEMBLY
.. 1
46 82-727•CYLINDER GASKET ...................... 1
47 82-720•CONICAL SPRING.......................... 1
48 20-5845•O-RING.......................................... 1
49 82-714•PISTON ASSEMBLY........................ 1
50 82-779 PISTON ROD ................................ 1
51 82-721•COMPRESSION SPRING ................ 1
52 82-711 CYLINDER ASSEMBLY .................. 1
53 20-3753•O-RING.......................................... 1
54 82-776•CAN SEAL .................................... 1
55 82-777INNER RING .................................. 2
56 82-753 INNER MAGNET .......................... 1
57 20-6022SCREW 1/4-28 x 3/4" Hex Hd............... 1
58 82-775•CAN .............................................. 1
59 82-778 CAN RETAINER ............................ 1
60 20-6023SCREW 12-24 X 1/2"Flat Hd. .............. 1
61 82-770 OUTER MAGNET ASSEMBLY ...... 1
62 80-406 STEADI-GRIP AGITATOR POST .... 1
63 20-6583•GROMMET.................................... 1
64 80-407 STEADI-GRIP AGITATOR PLATE .. 1
65 20-2530#10 EXTERNAL STAR WASHER .... 1
66 20-5832SCREW 10-32 X 3/8" Pan Hd. .............. 1
67 80-355DISPOSABLE CAN LINER
See 80-356 below ............................ 1
68 80-375 2 QT. CANISTER ASSEMBLY ........ 1
69 80-382†RETAINER RING ............................ 4
70 80-380†KNOB ............................................ 4
71 80-381†SWIVEL ........................................ 4
72 20-4870†PIN ................................................ 4
73 † CANISTER...................................... 1
▼Part of 80-353 Pressure Cup Repair Kit.
•Part of 80-354 Agitator Repair Kit.
◆Part of Air Control Valve Assembly, Item 25.
†Indicates parts are included in 80-375 Assembly. Item #68.
Indicates parts are included in Spare Parts Kit No. 80-390 (1 each).
Items NOT available separately. Available only as quantity pack.
Model 80-351 PRESSURE CUP WITH AGITATOR▲
7
PART
NO. DESCRIPTION QTY.
80-356 CANNISTER LINER QUANTITY PACK ..........12/pk.
80-404▲AGITATOR CUP CONVERSION KIT.............. 1
73-125 AIR CONTROLLER (For atomizing air) .............. 1
80-352▲HIGH FLUID PRESSURE CONVERSION KIT
(0-40 psig) ........................................................ 1
80-353
▲
PRESSURE CUP REPAIR KIT ............................ 1
80-354
▲
AGITATOR REPAIR KIT .................................... 1
80-390
▲
KNOB REPLACEMENT KIT .............................. 1
AGITATOR REPAIR KIT 80-354▲
(Model 80-351 Steadi-Grip SG-2 Pressure Cup with Agitator)
ACCESSORIES
(Not furnished. Please order separately.)
PART
NO. DESCRIPTION QTY.
20-3236-5O-RING 2-008 ........................................ 1
82-730 GASKET ................................................ 2
82-727 CYLINDER GASKET .............................. 1
82-720 CONICAL SPRING ................................ 1
20-5845 O-RING 2-118 VITON................................ 1
82-721SPRING ................................................ 1
20-3753 O-RING 2-016 VITON................................ 1
82-776 CAN SEAL ............................................ 1
82-775 CAN ...................................................... 1
20-6583GROMMET .......................................... 1
82-714 PISTON ASSEMBLY .............................. 1
▲Available from Industrial Finishing distributors only.
Available only as quantity pack.
Items NOT available separately.

Before converting to high pressure kit, depressurize
and shut off the entire system before installing the con-
version kit. Keep the cup lid in fully clamped position.
To convert to high pressure (0-40 psig) remove spring
cap (1) and replace spring (2) with an 85-80 spring.
Then, replace the standard GA-313 gauge (0-l5 psig)
with an 85-70 (0-60 psig) gauge (3).
Pressurize the cup slowly with air by turning spring
cap (1) clockwise. With the spring cap screwed all the
way in, adjust the pop valve by turning the pop valve
adjustment screw (4) clockwise until the pop valve
releases air at 40 psi gauge pressure as shown in the
illustration below. All items to convert to high pressure
are provided in 80-352 kit.
MODEL 80-352 HIGH PRESSURE RETRO-FIT CONVERSION KIT
CONVERSION INSTRUCTIONS
77-2658R-4 Revisions: (P5) Added footnote to Item No. 4; (P7) Added footnote to
Item No. 4, changed quantity of Item No. 7.
1
2
3
4
WARNING
A ttempting to install the conversion kit while the system is
pressurized could result in damage to components or
bodily injury.
!
11/03 © 2003 Inc. All rights reserved. Printed in U.S.A.
Industrial Finishing
Binks has authorized distributors throughout the world. For technical
assistance or the distributor nearest you, see listing below.
U.S./Canada Technical Service Office:
195 Internationale Blvd., Glendale Heights, IL 60139
Toll-Free Telephone: [phone] (U.S.A. and Canada only)
Toll-Free Fax: [phone]
Automotive Refinishing
Binks has authorized distributors throughout the world.
For equipment, parts and service, check the Yellow Pages
under “Automotive Body Shop Equipment and Supplies.”
For technical assistance, see listing below.
U.S./Canada Customer Service Office:
1724 Indian Wood Circle, Suite J-K, Maumee, OH 43537
Toll-Free Telephone: [phone] (U.S.A. and Canada only)
Toll-Free Fax: [phone]
Binks Worldwide Sales and Service Listing: www.binks.com
WARRANTY
This product is covered by Binks’ 1 Year Limited Warranty.