BioLAB BCBL-301 User manual

Operation Manual
Benchtop Low Speed Centrifuge
BCBL-301
Thank you for Choosing Biolab products. Please read the “Operating Instructions” and
“Warranty” before operating this unit to assure proper operation.

Safety Notices
We appreciate your business with our Instru ent. To prevent any potential accident, please
operate centrifuges according to the following safety protocol.
1. Unplug the ain power cord, when perfor ing aintenance or when centrifuge is
expected not being used for a long period of ti e.
2. Load the rotor with sa ples arranged sy etrically. Opposing tubes ust be of equal
weight. If necessary, use "water blank" tubes to balance sa ple tubes of unequal weigh. Do
not conclude that tubes are balanced by sight over volu e. Use the pan balance provided in
the centrifuge roo for balancing tubes in rotors for the centrifuge.
3. Never exceed the axi u speed posted for the rotor!
4. Never use the rotor that appears da aged (e.g. O-rings issing, scratched, corroded, and
cracked).
www.biolabscientific.com
Benchtop Low Speed Centrifuge BCBL-301

Index
01 Main specification and technical para eters ......................................................................04
02 Available rotors ................................................................................................................................04
03 Unpacking ..........................................................................................................................................05
04 Installation ..........................................................................................................................................05
05 Operation ............................................................................................................................................05
06 Trouble shooting ..............................................................................................................................07
Benchtop Low Speed Centrifuge BCBL-301
www.biolabscientific.com
3

01 Main specification and technical para eters:
Ite Description
Max speed 4000r/ in
Max capacity 8×15 l
Max CRF 1880×g
Ti ing 0～99 in
Noise ≤45dB（A）
Power supply 220V 50HZ 2A
Di ensions 310*265*215
Weight 8KG
02 Available rotors
Rotor Nu ber Rotor type Capacity Max speed
（r/ in） Max RCF（×g）
31701 Angle rotor 8×15 l 4000 1800
31702 Angle rotor 6×15 l/10 l 4000 1880
31703
Angle rotor 12×5 l 4000 1540
31704 Angle rotor 12×7 l 4000 1540
31705 Angle rotor 8×10 l 4000 1800
www.biolabscientific.com
4
Benchtop Low Speed Centrifuge BCBL-301

03 Unpacking
Please check whether there are serious da ages on the package as soon as you received the
centrifuge, if so, please contact us directly, if not, please unpacking the package, take out the
instruction anual, checking the co ponents and accessories. If you found so ething
issing, please tell us.
04 Installation
The centrifuge should be installed on a stable working table. Let its four rubber feet touch the
even surface of the table and then insert one head of the power plug into the socket which
ounted on the rear of the centrifuge. Insert the another head of the plug into the power
supply socket.(Attention: the power supply socket ust be connected with the earth in case of
electric shocks)
05 Operation
(1).Checking whether the round nut in the rotor is loose, if so, fasten the .
(2).Prepare the tubes; put the test liquids into the tubes, checking whether they are in the
sa e level with your eyes.
(3).Load tubes on the tube rack sy etrically; otherwise it will be resulted in severe vibration
in the process of centrifugation.
(4).Close the lid, ake sure it is locked
(5).Set para eters
The ti e and speed will be showing on the panel, switches and buttons as the following
figure：
Benchtop Low Speed Centrifuge BCBL-301
www.biolabscientific.com
5

Figure legend RCF/RPM and rotors nu ber ti e start rotors nu ber selection ① ② ③ ④
para eters selection para eters up para eters down stop working and stop ⑤ ⑥ ⑦ ⑧ ⑨
indicator
Plug in and turn on the switch，the ti e window and speed window in the panel will be
brighten.
Pre-selection of the para eters:
Set the rotor No.①
Press P/R button, it shows rotor No..Press ，rotor No. is adding and speed, rotor No. is
reducing.
Circularly press the button SEL will respectively display SPEED, RCF, TIME, BRAKE.
Set the speed②
When speed window flash, press speed selection range fro 0rp to axi u
4000rp ，press speed button speed will be down, choose the speed you prefer.
Set the ti e③
When ti e window flash, Press , the ti e selection range fro 0 inute to 99 inutes, then
press . The ti e will be down ,set the ti e which you want.
Set the brake syste④
Press SEL button，ti e window shows bX，and then with the up and down button to set the
www.biolabscientific.com
6
Benchtop Low Speed Centrifuge BCBL-301

brake syste , there is 10 brakes fro b0 to b9,b0 is the slowest in speed up and down, and
b9 is the fast in speed up and down.
(6).Start the centrifuge
Press the start button, the start indicator will be brighten，the centrifuge starts to work，the
speed window will show the speed；the ti e window begin to count down, the speed will be
up to what you pre-selected within1-2 inutes.
(7).Stop the centrifuge
When the ti e window count down to 0（or press the stop button），stop indicator will be
brighten，the speed will be down to 0, then the centrifuge will stop running. Open the lid,
take out the tubes, centrifugation finished.
(8).Power off
Press the down side of the switch button，now the panel is cut off，but the whole achine is
not power off, if you stop using the achine, you should take out the plug fro the power
supply socket.
06 Trouble shooting
(1) Press the up side of the switch button，the centrifuge doesn’t work, please check the fuse
in the socket ounted on the rear of the centrifuge，if it is da aged, please replace it with
the 5A fuse. if not , then check the switch，if the above two places is in good condition,
please contact us.
(2) ake sure never ask the non-professional person to solve the electronic board proble .
Warranty Policy
1. We have one –year warranty on our all products
2. After the achine fixed, our professional technician will file it and keep track of the usage of
the achine.
3. We will pay attention to the feedback of the custo ers within 24 hours.
4. We only charge for the accessories on repairing the achine beyond the one-year warranty
ti e.
Benchtop Low Speed Centrifuge BCBL-301
www.biolabscientific.com
7

BIOLAB SCIENTIFIC LTD.
3660 Midland Avenue, Suite 300, Toronto, Ontario M1V 0B8 Canada
E ail: [e-mail] Tel: [phone]
Website: www.biolabscientific.co
www.biolabscientific.com
8
Benchtop Low Speed Centrifuge BCBL-301