Mocka Sadie User manual

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Sadie
Six Cube Unit
Thank you for your purchase.
Please follow the instructions below for correct assembly
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earth-
quake. Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety
wall anchor with all furniture sold and we recommend these are used to prevent your product
tipping. The fixing device provided should fit most wall types, but please note that dierent wall
materials may require dierent fixing devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
.
Phillips & Flathead screwdrivers
and hammer required
long
dowel x4
Wall Strap
x2
washer
Z
Y
wall
x1
X
anchor
safety
WV
strap x1 x1
screw wall
x1
screw
x16
bolt
x4
bolt
A B C D EF
GIJK
Hardware Supplied
x12
dowel locking
nut x16
wedge
x8
felt pad
x8
H
screw
x8
long
bolt x8
Key
Allen
x1
large
dowel x8

1
Sadie
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
2
Six Cube Unit
2
Insert 8x bolts (C) into panel [1]. Tighten with a screwdriver.
C
C
C
C
C
C
C
C
1
Panel layout
1
3
5
5
2
6
6
6
6
7
4

Sadie
Six Cube Unit
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Insert 4x bolts (C) into panel [3] and panel [4]. Tighten with a screwdriver.
3 4
Insert 4x bolts (C) into panel [7]. Tighten with a screwdriver.
C
C
C
C
C
C
C
C
3
4
7

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Sadie
Six Cube Unit
5 6
Attach panels [6] to panel [7] with 4x long dowels (F) and secure
with 4x bolts (E). Tighten with an Allen key (J).
Attach panels [6] to panel [7] secure with 4x locking nuts (D).
Tighten with a screwdriver.
F
F
F
F
E
E
E
E
D
D
D
6
6
7
7
6
6
E
J
D

Sadie
Six Cube Unit
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach panels [6] to panel [7] with 4x long dowels (F) and secure
with 4x bolts (E). Tighten with an Allen key (J).
Attach panels [6] to panel [7] secure with 4x locking nuts (D).
Tighten with a screwdriver.
7 8
D
D
A
A
AD
D
3
4
7
5
4
3

Sadie
Six Cube Unit
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach panel [2] to panels [3], [4] and [6] with 4x large dowels (G),
4x dowels (A) and secure with 8x long bolts (B) as shown.
Tighten with an Allen Key (J). Apply 8x felt pads (K) to the panel [2] as shown.
Slide panel [5] down along the grooves between the panels [3] and [4] as shown.
109
K
K
K
K
K
K
K
K
A
G
G
G
A
B
B
B
B
B
B
B
B
4
6
6
3
2
5
4
3
KB
J

11
Sadie
Six Cube Unit
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach panel [1] to panels [3] and [4] with 4x large dowels (G) and secure
with 4x locking nuts (D). Tighten with a screwdriver. Attach panel [1] to
panels [6] with 4x dowels (A) and secure with 4x locking nuts (D).
Tighten with a screwdriver.
Attach 8x wedges (H) into the corners of the back of the unit and
secure with 8x screws (I). Tighten with a screwdriver. Attach 1x
safety straps (V) to the top of the back side of the unit as shown
using 1x washers (Z) and 1x screws (W). Tighten with a screwdriver.
12
A
A
D
D
D
D
1
3
6
6
4
I
H
I
H
H
H
I
I
V
Z
W
HI
HI
I
I
H
H
I
H
V
Z
W
GG
G

13
Sadie
Six Cube Unit
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z) , 1x wall anchor (X) and 1x
wall screw (Y). Ensure unit is balanced and steady before use.
You’re done, enjoy!
14
X
Y
VZ
anchor
wall
screw
washer
strap