fantastic furniture Cloud Dresser Mirror Set 1 Drawer User manual

Version 1.0
Cloud
Dresser Mirror Set 1 Drawer
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home for your
chance to win a $250 Fantastic Furniture Gift Card!
fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love
WARNING: ENSURE THE BRACKETS ARE ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
dierent surface materials require dierent attachments. Please seek
professional advice if you are in doubt of what wall connections to
use.
Recommended weight capacity : 80kg on bench.
120kg on seat.

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
2 x Side Panels (P2)
Back Panel (P3);
Front Panel (P4);
4 x Block (P5);
Rail (P6);
Mirror (P7);
Rail (P8);
4 x Legs (P9);
Drawer Front (P10)
Left Drawer Side (P11);
Right Drawer Side (P12);
Drawer Bases (P13);
Drawer Back (P14);
Top Panel (P15);
2 x Side Panels(P16)
2 x Panels (P17);
4 x Blocks (P18);
4 x Legs (P19)
Hardware pack
Left Drawer
Side (P11)
Right Drawer
Side (P12)
Drawer Back
(P14)
Drawer
Base (P13)
Drawer
Front (P10)
Top Panel
(P1)
Top Panel
(P15)
Block
(P5) Block
(P5)
Block
(P5)
Block
(P18)
Block
(P5) x4
x4
x4
Leg
(P9)
Side Panel
(P2)
Side Panel
(P2)
Side Panel
(P16)
Side Panel
(P16)
Rail
(P8)
Rail
(P6)
Mirror
(P7)
Back Panel
(P3)
Back Panel
(P17)
Front
Panel
(P17)
Front Panel
(P4)
10 x Cam
Bolts
(H3)
10 x Cam
Nuts
(H4)
3 x Small
Screws
(H5)
1 x Slider
(H6)
1 x Handle
(H7)
43 x Screws
(H2)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Page 4
fantasticfurniture.com.au
DO NOT USE
1 x Allen Key
(H1)
7 x Small Bolts
(H13)
8 x Felt Pads
(H8)
8 x Screws
(H9)
18 x Flat Washers
(H10)
16 x Long Bolts
(H12)
16 x Spring
Washers
(H11)
Leg
(P19)
2 x Bracket
Screws
(H15)
2 x Brackets
(H14)

(P1)
You will need
Step 1
Step 2
You will need
Phillips Head
Screwdriver
6 x Cam Bolts
(H3)
Begin assembling the dressing table.
Attach 6 x Cam Bolts (H3) to Top Panel (P1) by tightening with the Phillips Head Screwdriver.
Attach 4 x Blocks (P5) to the Front and Back Panels (P3 & P4) with 12 x Screws (H2) by
tightening with the Phillips Head Screwdriver.
fantasticfurniture.com.au Page 5
Phillips Head
Screwdriver
H3
H3
H3
H3
H3
H3
(P3)
(P5)
(P4)
(P5)
(P5)
(P5)
H2
H2 H2
H2
12 x Screws
(H2)

You will need
Step 3
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Step 4
You will need
Attach the Side Panels (P2) to Blocks (P5) with 12 x Screws (H2) by tightening with the
Phillips Head Screwdriver.
Insert 6 x Cam Nuts (H4) into the Side Panels (P2) and the Front and Back Panels (P3 & P4)
as shown. Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.
Attach the Side Panels (P2) and Front and Back Panels (P3 & P4) to the Top Panel (P1)
by tightening all Cam Nuts with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
6 x Cam Nuts
(H4)
Phillips Head
Screwdriver
(P1)
fantasticfurniture.com.au
fantasticfurniture.com.au Page 6
(P3)
(P2)
(P2)
(P2)
(P2)
(P4)
(P5)
(P5)
(P5)
(P5)
H2
H2
H4
H4 H4
H2
H2
12 x Screws
(H2)

Step 6
You will need
8 x Long Bolts
(H12)
1 x Allen Key
(H1)
8 x Flat
Washers (H10)
8 x Spring
Washers (H11)
You will need
Phillips Head
Screwdriver
Step 5
Attach 4 x Legs (P9) to the Blocks (P5) with 8 x Flat Washers (H10), 8 x Spring
Washers (H11) and 8 x Long Bolts (H12) by tightening with the Allen Key (H1).
Attach 4 x Felt Pads (H8) to the Legs (P9).
Attach the Rail (P8) to the Top Panel (P1) with 2 x Screws (H2) by
tightening with the Phillips Head Screwdriver.
2 x Screws
(H2)
(P9)
(P9)
(P9)
(P9)
fantasticfurniture.com.au Page 7
(P8)
(P1)
(P5)
(P5)
(P5)
(P5)
H12
H10
H11
H8
H1
4 x Felt Pads
(H8)
H8
H2
H2
H8
H8

Attach the Rail (P6) to the Mirror (P7) with 4 x Small Bolts (H13) by tightening with
the Allen Key (H1).
Step 7
You will need
4 x Small Bolts
(H13)
1 x Allen Key
(H1)
3 x Small Bolts
(H13)
1 x Allen Key
(H1)
fantasticfurniture.com.au Page 8
You will need
Step 8
(P6)
(P6)
(P7)
(P1)
H13
H13
H1
H13
Attach the Rail (P6) to the Top Panel (P1) with 3 x Small Bolts (H13) by
tightening with the Allen Key (H1).
Countersunk
holes facing up

Attach 4 x Cam Bolts (H3) to Drawer Front (P10) by tightening with the Phillips Head
Screwdriver.
You will need
Step 9
(P10)
(P11)
(P12)
fantasticfurniture.com.au Page 9
Phillips Head
Screwdriver
4 x Cam Bolts
(H3)
H4
H4
Insert 4 x Cam Nuts (H4) into the Left and Right Drawer Side Panels (P11 & P12) as shown.
Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts. Attach the
Drawer Front (P10) to the Left and Right Drawer Side Panels (P11 & P12) by tightening all
Cam Nuts with the Phillips Head Screwdriver.
You will need
Step 10
Phillips Head
Screwdriver
4 x Cam Nuts
(H4)
(P10)
H3 H3
H3 H3

You will need
Step 12
Slide the Drawer Base (P13) into the grooves of the Left and Right Drawer Side Panels (P11 &P12)
as shown.
(P11)
(P12)
(P13)
Attach 1 x Slider (H6) to the Drawer Back (P14) with 3 x Small Screws (H5) by
tightening with the Phillips Head Screwdriver.
fantasticfurniture.com.au Page 10
Phillips Head
Screwdriver
Step 11
H6
H5
3 x Small
Screws (H5)
1 x Slider
(H6)
You will need
Step 13
Attach Drawer Back (P14) to Left and Right
Drawer Side Panels (P11 & P12) with 4 x Screws (H9) by
tightening with the Phillips Head Screwdriver.
Before securing, ensure the Drawer Base (P13) lines up
with the grooves the whole way around the drawer.
(P11)
(P14)
(P13)
(P14)
(P12)
Phillips Head
Screwdriver
4 x Screws
(H9)
H9
H9