Bizfon 7000 User manual

50 Stiles Road • Salem, NH 03079 • 603-870-9400 • www.bizfon.com
© 2004 InSciTek Microsystems, Inc. All rights reserved. Bizfon is a registered trademark. All other names may be trademarks or registered trademarks of their respective owners
Revised: 31 January 2005
Quick Reference Guide
Command What Does It Do?
### Dials another internal user, where ### is a 3 digit extension number, such as 123.
3### Directly accesses a user’s voicemail box. May be used to leave a message or transfer a caller to a
specific VM box.
350 – 399, 34000-34999 Dials system Speed Dial numbers (Pre-programmed by administrator).
402 Overhead Paging.
420/421 Turns on Do Not Disturb for this handset/Turns off Do Not Disturb for this handset.
45### Forwards calls to an extension in the range 100-299.
450 Cancels Call Forwarding.
460-469 Pages to a group of handsets defined by administrator. 460 is all page.
4600-4609 Enter a Call Queue. Dial 4600 to enter the first Call Queue, 4601 to enter the second Call Queue etc.
4610-4619 Retrieve a call from the Call Queue. Dial 4610 to retrieve a call from the first Call Queue, 4611 to retrieve
a call from the second Call Queue, etc.
700 Parks a call (Transfer to 700, listen to parked location, complete transfer).
701-709 Retrieves a call parked on extensions 701-709.
7### Answers a ringing extension.
8 + pin code Accesses an outside line via a pin code-restricted handset.
9 Accesses an outside line for local or long distance calling.
Telephone-Specific Commands
BizTouch™ IP2 Phone Cisco 79xx Phones Analog Phones
Access Voice
Mail
Press Messages Button, or dial 6
plus your extension number.
Press Messages Button or dial 6 plus your
extension number.
Dial 6 plus your extension number.
Attended
Transfer
Press <Transfer>, select a
second call appearance, dial
number, speak to second party,
and press <Transfer>.
Press <more>, <Trnsfer>, dial number,
announce call, <Trnsfer>.
IMPORTANT - wait for call to clear from
display then hang up.
Press <FLASH>, dial number,
announce call, and hang up.
Blind Transfer Press <Transfer>, dial number,
and hang up.
Press<more>, <BlndXfr>, dial number Press <FLASH>, dial number, hang
up.
Conference
Call
Establish call with first party,
press <Hold>, select second call
appearance and dial another
party, press<Conference>, press
the call appearance of first party.
Establish call with first party, pPress
<Confrn>, dial second party, announce
conference, and press <Confrn> to
establish 3-way conference.
Establish call with first party, Press
<FLASH>, dial *33, wait for dial tone,
dial second party, announce
conference, press <FLASH> to
establish 3 way conference.
Park a Call Press <Transfer>, select a
second call appearance, dial
700, listen to parking location,
and press <Transfer>.
Press <more>, <Trnsfer>, dial 700, listen
for parking location, press <Trnsfer> , wait
for call to clear from display then hang up.
<FLASH>, dial 700, listen for parking
location, hang up.
Retrieve a
Parked Call
Dial 70x (parking location given
during parking procedure above).
Dial 70x (parking location given during
parking procedure above).
Dial 70x (parking location given
during parking procedure above).
Consultation Press <Transfer>, select a
second call appearance, dial the
third party and consult, press
<Transfer> to deliver the call, or
press first call appearance to
return to the second party.
Press <more>, <Trnsfer>, dial number,
consult, press <End Call>, <Resume>
Press <FLASH>, dial number,
consult, press <FLASH>.