Black Horse Off Road B30 User manual

INSTALLATION INSTRUCTIONS
APLICATION2001FORD ESCAE/MAZDATRIBUTE
TEL:1-866-XANATOS
MOUNT KIT
B30
QTY PARTS KIT CONTENTS
DESCRIPTION TOOLS REQUIRED
1
1
1
6
2
8
4
8
2
SAFARI BAR ASSEMBLY (PURCHAED SEPARATELY)
MOUNT BRACKET-DRIVER SIDE
MOUNT BRACKET-PASSENGER SIDE
M12×50 HEX BOLT
M12 BOLT PLATE
Φ12 SAE FLAT WASHERS
M12 HEX NUT
Φ8 SPLIT LOCK WASHER
Φ12FLAT WAHSHER
NOTE: SOME FASTENERS BE LEFT OVERAFTER
INSTALLATION
3/4”SOCKET
3/4” WRENCH
10MM SOCKET
TOROUE WRENCH
PATCHET
STEP1: REMOVE THE CONTENTS FROM THE BOX AND CHECK FOR ANY DAMAGE. VERIFY ALL
PARTS AGAINST PARTS LIST.
STEP2: READ AND UNDERSTAND INSTRUCTIONS COMPLETELY BEFORE BEGINNING
INSTALLATION.
STEP3: REMOVE 10 MM BOLT FROM EACH SIDE OF THE LOWER AIRDAM (BOLTS ARE LOCATED
TO THE OUTSIDE OF EACH TIE DOWN LOOP).
STEP4: ATTACH DRIVER SIDE BRACKET TO THE DOWN LOOP USING M12 BOLT, Φ12 FLAT WAHSER,
Φ12 LOCK WASHER AND M12 HEX NUT.HAND TIGHTEN. REPEAT FOR OPPOSITE SIDE,
SEE FIGURE 2.
NOTE: BRACKETS ATTACH TO THE INSIDE FACE OF TIE DOWN LOOP.
STEP5: ATTACH SAFARI BAR HOOP TO TOP BTACKETS USING M12 HEX BOLT, Φ12 FLAT WASHER
AND Φ12 LOCK WASHERS,HAND TIGHTEN. SEE FIGURE 1.
STEP6. CENTER AND LEVEL SAFARI BAR. TIGHTEN AND TORQUE FASTENERS TO 65FT.LBS.
Page 1 of 2

Page 2 of 2