Black Horse Off Road RB08BK User manual

TONNEAU COVER BASE FOR BLACK CLASSIC ROLL BAR FOR 2019-2020 FORD RANGER
Page 1 of 5
INSTALLATION INSTRUCTIONS
TONNEAU RAISED BASE FOR BLACK CLASSIC ROLLBAR FOR
FORD RANGER 2019-2020
PART # RB08BK

TONNEAU COVER BASE FOR BLACK CLASSIC ROLL BAR FOR 2019-2020 FORD RANGER
Page 2 of 5
Please read the instruction completely for easy installation, which will also help you to avoid
scratches or other potential damages to your appealing car.
The figures here are for reference only and may have differences with the actual product you
received, however they share the same assembly way.
Mild soap may be used also to clean the Product.
Please periodically check and retighten all the hardware and clean the investment for a refresh
look.
NO. QTY NAME NO. QTY NAME
○
1E1
Pipe 1
A○ 2E1
Pipe 2
A○ 3E1
Connecting plate (FOR LED LIGHT
INSTALLATION)
A○ 4E2
Block
A○ 5E1
Decoration plate-L
A○ 6E1
Decoration plate-R
A○ 7E2
Red decoration plate
A○ 8E2
Decoration plate backboard
Parts list
Care and Cleaning
Before Installation

TONNEAU COVER BASE FOR BLACK CLASSIC ROLL BAR FOR 2019-2020 FORD RANGER
Page 3 of 5
A○ 9E4
Gum cover
A○ 10E1
Allen wrench S=5
A○ 11E1
Left support bracket
A○ 12E1
Right support bracket
A○ 13E4
T bolt 3(M10x35 button head allen
bolts)(50x15-25-5)
A○ 14E4
Button head allen bolts M12_40
A○ 15E2
Spring washer D8
A○ 16E2
Button head allen bolts M8_40
A○ 17E2
Hex nut M8
A○ 18E4
Flat washer D8
A○ 19E16
Flat washer D6
A○ 20E8
Spring washer D6
A○ 21E8
Button head allen bolts M6_20
A○ 22E
8
Hex nut M6
A○ 23E1
Allen wrench S=4
A○ 24E1
Allen wrench S=2.5
A○ 25E1
Allen wrench S=8
A○ 26E6
Flat washer D10

TONNEAU COVER BASE FOR BLACK CLASSIC ROLL BAR FOR 2019-2020 FORD RANGER
Page 4 of 5
A○ 27E6
Hex nut M10
A○ 28E6
Spring washer D10
A○ 29E6
PVC plastic block φ10(δ0.7*40*40)
Step1: Assemble A○ 1E A and A○ 2E A with standard parts. Lock all the standard parts after adjust the position.
Installation Steps
Use standard parts ○ 15 ○ 16 ○ 17 ○ 18 to
○
15 ○ 16 ○ 17 ○ 18
○
1○ 2○ 3○ 4

TONNEAU COVER BASE FOR BLACK CLASSIC ROLL BAR FOR 2019-2020 FORD RANGER
Page 5 of 5
Step2: Assemble decoration plates and brackets with pipes. Lock all the standard parts after adjust the position.
Step3:Place the roll bar on the truck in an appropriate location. And mark the hole with pen. 2 places in each
part, total are 4 places. Remove the product.
FOR 2019-2020 FORD RANGER:
Put the left and right support bracket on both side of the truck, and use A○ 13E AA○ 26E AA○ 27E AA○ 28E AA○ 29E A to fasten on the
original car slot.
Any damages and losses caused by improper installation and application, goes beyond our quality
warranty.
NOTE
Original car slot.
Use ○ 13 with ○ 26 ○ 27 ○ 28
○
5○ 6○ 7○ 8
Use accessories○ 19 ○ 20
○
21 ○ 22 to install ○ 5
Use accessories ○ 14