Black Horse Off Road ASHC02 User manual

Instrucons Ref# INS-ASHC02
Black Horse Off Road 39 St. Mary’s Place Freeport NY11520 USA Tel: [phone] Website: www.blackhorseoffroad.com
BLACK HORSE OFF ROAD®
Installation Instructions ASHC02
[Fit Honda CR-V 2023]
Parts List:
4 pcs Self-tapping screws
Tools:
Phillips screwdriver
Center Punch

Instrucons Ref# INS-ASHC02
Black Horse Off Road 39 St. Mary’s Place Freeport NY11520 USA Tel: [phone] Website: www.blackhorseoffroad.com
Safe installation
STEP 1 Remove the plastic tray from the armrest box. Empty the armrest box of all contents.
STEP 2 Open the safe lid, remove the padding from the safe, and insert the safe into the armrest box.
STEP 3 Use the center punch to make four pilot holes in the armrest box using the 4 pre-drilled holes in
the safe brackets as template.
STEP 4 insert the 4 self-tapping screws. Don't over-tighten, over-tightening may cause damage to the
armrest box.
STEP 5 Re-insert the padding.
STEP 6 Re-install the plastic tray.
Setting the Combination
The factory preset combination is 0-0-0-0
Please keep the safe door open when changing the combination.
To change the combination, insert the coding pin provided into the hole in the side of the lock.
Remove the coding pin to lock in the combination. Test the lock operation before closing the safe door.
Please note: The combination can only be changed again by setting the saved combination and inserting the
pin. Please record the combination on the card provided.