Black Horse Off Road TR-JECOOE User manual

OE CROSS BAR FOR JEEP COMPASS 11-16
INSTALLATION INSTRUCTIONS
OE CROSS BAR FOR JEEP COMPASS 11-16
PART # TR-JECOOE

OE CROSS BAR FOR JEEP COMPASS 11-16
Matters needing attention
A. In order to facilitate your installation, please carefully read the instruction manual before
installation. Installation should take care and protect your car, avoid scratching；
B. When installing, remove the parts from the car and keep in mind the location of the installation
so that it can be installed correctly after installation；
C. After installation, please make sure the link parts are tight, to ensure the safety of use
Installation steps
1、Check and confirm the accessories are complete.
2、Loosen the knob on the end cap of cross bar, so that both sides of the plastic bracket are free to
Adjustable of length.

OE CROSS BAR FOR JEEP COMPASS 11-16
3、Fit this cross bat on the roof of car and adjust longitudinal position
4、Tighten the screws on the inner side of the plastic bracket with a wrench.
5、Tighten the knob on the plastic bracket.
6、installation is complete