Blueant Q2 User manual

User Guide
SMART
BLUETOOTH
HEADSET

ENGLISH
3
Contents
Introduction 6
Charge Your Q2 7
Switching the Q2 On and Off 7
Pair the Q2 with your Phone 8
Transfer your Phonebook 8
Wearing Your Q2 10
Changing the Ear Bud 10
Stabilizing Ear Buds 10
Use Your Voice to Control the Q2 11
Use Your Voice to Make Phone Calls 12
Use Your Voice to Answer Calls 12
Use Your Voice to Access the World 13
List of Voice Commands 14

4
Transferring your Phonebook Contacts to the Q2 16
Automatically Transferring your Phonebook Contacts to the Q2 16
Manually Transferring your Phonebook Contacts to the Q2 16
Updating your Phonebook Contacts on the Q2 17
Listening to Audio 18
Reconnecting to the Q2 18
Using 2 Phones with the Q2 (Multipoint) 19
Which Phone is Used for Calls? 19
Multiple Calls (Call Waiting)* 20
Firmware Upgrades 21
Function Reference 21
Phone Specifi c Tips and Tricks 24
Android 24
Apple® iPhone®  24

ENGLISH
5
BlackBerry 25
Other Models 25
Troubleshooting 26
Resetting the Q2 31
Specifi cations 32
Help and Support 32
Terms and Conditions 33

6
Introduction
Welcome to the BlueAnt Q2: the voice controlled smart
Bluetooth headset for smartphone users.
With the Q2 you can make outgoing calls and answer
incoming calls using just your voice, and you will always
know who is calling without looking at your phone
because the Q2 will read out the caller’s
name or number.
Read on and learn how to use the Q2 to listen to
turn-by-turn GPS directions, play music, and access
a world of information such as traffi c reports, weather and
sports results.
Vol -
Vol +
Multi-Function
Button (MFB)
Microphones
Indicator Light

ENGLISH
7
Charge Your Q2
Your Q2 has been given an initial partial charge to get you started, but for best results we
recommend you fully charge it using the supplied USB cable and adaptor.
> You should charge the Q2 whenever it announces that the battery is Very Low.
> A full charge takes about 3-4 hours.
> During charging, the indicator light fl ashes red.
> When the light goes white, the charge is complete.
Switching the Q2 On and Off
There is a hardware power switch next to the charging
port on the back of the Q2.
Slide the switch across to turn the Q2 on or off.
Charging
port
Hardware
power switch
(off position)

8
Pair the Q2 with your Phone
To use the Q2 you need to pair it with your phone.
1. Slide the hardware power switch across to turn the Q2 on and then put the Q2 in your ear.
2. If this is the fi rst time you have used the Q2 it will go straight to pairing mode. The voice
prompts will start to talk you through the pairing process.
For subsequent pairings, click the MFB and wait for the Q2 to ask you to Say A Command.
Then say Pair Me.
3. Follow the voice prompts to pair the Q2 with your phone. The pairing code is 0000 (four
zeros).
Transfer your Phonebook
Once the pairing is complete your Q2 will attempt to transfer the contacts from your
phonebook so that it can announce the names of incoming callers.
Note: If your phone prompts you to allow a connection to the Q2, you must select “YES” or
“OK”.

ENGLISH
9
BlackBerry®
If you are using a BlackBerry smartphone you may see a message
like this one.
Select “Don’t ask this again” so that a tick appears in the box, and
then choose “YES”.
Android™
On Android devices a message about the phonebook transfer may
appear in the notifi cations area at the top of the screen.
In order to transfer your contacts you must swipe your fi nger over this
message and accept the phonebook transfer request from the Q2.
Automatic Transfer Not Supported
Some phones do not support automatic phonebook transfers. If this is
the case on your phone the Q2 will announce that it cannot transfer the
contacts automatically.
See “Manually Transferring your Phonebook Contacts to the Q2” on page 16 for help.
Accept connection request
from BlueAnt Q2?
YES
NO
Don’t ask this again
Phonebook Access Request
Notifi cation
shown on
Android
devices

10
Wearing Your Q2
You can wear your Q2 in either ear. For best
results:
> Rotate the ear gel as shown here.
> Make sure that the headset is angled towards
your mouth.
Changing the Ear Bud
Your Q2 is supplied with a choice of ear buds in different sizes so that you can choose the one
that fi ts best. If you want to change the ear bud, remove the attached one by gently lifting it
away from the Q2.
Gently press the replacement ear bud onto the Q2 and push it fi rmly to secure it in place.
Stabilizing Ear Buds
The optional stabilizing ear buds allow you to wear the Q2 with or without
an ear hook. Your Q2 is supplied with a choice of sizes.
LEFT
EAR
RIGHT
EAR