Blueant BLUEANT Z9 Installation guide

Z9 Headset FAQ

1
Z9 Bluetooth Headset
General
1. What are the main difference between the Z9 and other Bluetooth headsets?
2. What is included in the Z9 package?
3. How does the Z9 use the Bluetooth technology?
4. How do I handle calls when the Z9 is connected?
5. Can I transfer an ongoing call back to my phone to continue it there?
6. How many devices can I pair to the Z9?
7. Is my phone compatible?
8. What is the passcode/passkey of the Z9?
9. Can I change the passcode of the Z9?
10. Can I use voice activated dialling if my phone supports it?
11. Can I use the Z9 to listen to music from my mobile?
12. How often should I charge my Z9?
13. Can I use my Z9 with my computer for VOIP applications?
14. Do I need to pair the devices every time I use them together?
15. What is Voice Isolation and how do I use it?
16. Can I switch the Voice Isolation prompt off?
17. What is the best practice for taking care of my BlueAnt Device?
Bluetooth
1. What is Bluetooth Wireless Technology?
2. Is it safe to use Bluetooth devices? I have heard they can allow unauthorized
connections.
3. Can somebody else take control of my Z9 if they are in range?
4. What is the difference between Handsfree and Headset Bluetooth Profiles?
5. How do I know if my devices are connected?
6. Can I connect more than one device to my Z9 at the same time?
7. How far can my mobile be from the Z9 and still remain connected?
8. Can other electrical devices cause interference with Bluetooth?
9. If I cup my hand over a Bluetooth device the signal strength and quality suffers.
Why does this happen?
10. What Bluetooth mobile phones can use the Z9 headset?
11. How do I use VOIP?

2
Troubleshooting
1. How do I re-connect my Z9?
2. Why won’t my Z9 go into pairing mode?
3. The Z9 won’t reset. What can I do?
4. Is my Z9 charged?
5. Why can’t I hear any sound from the Speaker?
6. Why is the Z9 noisy and distorted?
7. My Z9 worked great but now it won’t connect. What can I do?
8. The Z9 switches off when I hang up a call. What can I do?
9. Why can the talk time and standby time differ with the products specification
description.
10. Why does my phones battery not last as long as it used to?
11. I am having trouble pairing a second phone. What can I do?
12. How can I stay near the Z9 but not have calls diverted through it?
13. My phone says “Bluetooth Module not found”. What can I do?
14. I have a PDA phone that pairs to the Z9 but has trouble transferring calls. How can
I fix this?
15. Why can’t I hear the dial tone from headset when I dial?
16. Voice dialing is not successful every time. What can I do?
17. People cannot hear my voice. What am I doing wrong?
18. Is there a smaller rubber earpiece available?
19. Is there a car charger available for the Z9?
20. Can I purchase a car charger (or any other accessories) for the Z9?
21. I have mixed up my AC charger with my other device chargers. What does the Z9
AC charger look like?
22. The speaker gel has come off. What can I do?
23. How do I upgrade the firmware for my Z9?
24. Can I upgrade the Firmware on a Mac?
25. I’m having trouble upgrading the firmware and getting error messages. How do I do
it?
26. There are so many button combinations to remember. What can I do?
27. I have read all the solutions in this document but I still cannot get my Z9 to work
properly. What can I do?

3
General
1. What are the main difference between the Z9 and other Bluetooth headsets?
The Z9 uses Voice Isolation Technology and has Dual Microphones for clearer voice with
less background noise.
The Z9 can connect to paired devices on request. Press the MFB (Multi-Function Button)
once to connect to the first paired phone, twice to connect to the second paired phone or
three times to connect to the third paired phone.
For example, if you have a personal mobile and a work mobile, these could be the first two
devices and a computer could be the third.
2. What is included in the Z9 package?
In the box is the Z9 headset, a USB charging cable, an AC charger, a User guide, 3x
removable ear hooks, Quick Start Guide, User Manual & Warranty Card.
3. How does the Z9 use the Bluetooth technology?
Bluetooth is used to send and receive voice signals over radio waves between your mobile
phone and the Z9. It allows the Z9 to control phone calls on your mobile phone remotely.
4. How do I handle calls when the Z9 is connected?
For incoming calls simply press the MFB button (multi-function button) once to answer the
call.
For outgoing calls press the MFB button once to activate voice dialing or dial as per normal
from your phone and the call will transfer to the Z9.
For redialling the last number called, press volume up button for 3 seconds.
To terminate an ongoing call hold the MFB for 3 seconds.

4
5. Can I transfer an ongoing call back to my phone to continue it there?
Yes. Simply short press the Vol Up & Vol Down buttons simultaneously to disconnect from
the Z9 and transfer the call to the phone.
6. How many devices can I pair to the Z9?
The Z9 can store pairing information for 3 different phone devices and connect to either
when requested using Multi-Connect Call Switching Technology. With the headset
on… press the MFB once to connect to the first paired phone, twice for the second and
three times for the third. The Z9 can only connect to one phone at a time. To connect to the
second or third phone the first must be disconnected by short pressing the Vol Up & Vol
Down buttons.
7. Is my phone compatible?
If your phone has Bluetooth it more than likely supports a Handsfree or Headset Bluetooth
profile, and so will work with the Z9. Check your phones manual for up to date information.
8. What is the passcode/passkey of the Z9?
The Passcode for the Z9 is “0000”.
9. Can I change the passcode of the Z9?
No, the passkey is inbuilt and cannot be changed.
10. Can I use voice activated dialling if my phone supports it?
Yes. The Z9 supports voice activated dialling if your phone also supports it. Check your
phones user manual for information on setting up this feature.
11. Can I use the Z9 to listen to music from my mobile?
Some mobiles can send music to the Z9 using the Handsfree profile but it will be a mono
signal and sound a bit like an AM radio.
12. How often should I charge my Z9?
You should charge the Z9 when the LED Indicator rapidly starts flashing red instead of blue.
The battery will last for about 200 hrs on standby and much longer if the Z9 is switched off
in between uses.

5
13. Can I use my Z9 with my computer for VOIP applications?
Yes. You can connect the Z9 to a PC or Mac that supports the Headset or Handsfree
profile. To do this you need to have Bluetooth enabled in your computer by using a
Bluetooth USB Dongle or having a computer that has Bluetooth inbuilt.
Depending on the Bluetooth Software the connection process is different. Simply put the Z9
into Pairing mode, then search for it using your computers Bluetooth Software. Enter the
Passkey “0000” then start the Headset/Handsfree service.
14. Do I need to pair the devices every time I use them together?
No. The pairing process is required only once for each phone unless the devices are
deleted.
15. What is Voice Isolation and how do I use it?
Voice Isolation is BlueAnt’s own proprietary DSP software which uses sophisticated
techniques to separate the voice signal from the background noise using a dual microphone
array. This technology is effective against noise sources whether they are stationary,
impulsive or even other voices.
The Z9 has two voice Isolation modes: Standard & Max.
Voice Isolation Standard is used for normal environments with little background noise, and
is the Default mode for the Z9.
Voice Isolation Max is used for environments with a lot of background noise.
To switch between modes, while on a call short press the MFB.
16. Can I switch the Voice Isolation prompt off?
No. The Voice Isolation prompt cannot be turned off.
17. What is the best practice for taking care of my BlueAnt Device?
To ensure continued use, please avoid leaving your BlueAnt device in direct sunlight and/or
in areas above 100 degrees Fahrenheit/40 degrees Celsius such as on the dash of your car
or in the center console.

6
Bluetooth
1. What is Bluetooth Wireless Technology?
Bluetooth Wireless Technology is a short-range communications technology using
encryption for high security data/voice transmission.
2. Is it safe to use Bluetooth devices, I have heard they can allow unauthorized
connections?
For Bluetooth security reasons, once you have set up your Bluetooth devices we
recommend turning OFF the visibility option in the Bluetooth Menu of your phone so that
other Bluetooth users cannot see the your phone. (This only applies to a few mainly older
Bluetooth enabled phones as most new phones have better security).
3. Can somebody else take control of my Z9 if they are in range?
No, the Z9 can only connect to previously paired devices that have been authenticated. The
Pairing procedure creates an encrypted key known only to the two devices paired.
4. What is the difference between Handsfree and Headset Bluetooth Profiles?
Handsfree Profile allows for extra features to be used with a mobile phone. Voice Dial,
redial, call transfer are some that are included in Handsfree but not Headset. Handsfree
also allows for a slightly better call quality.
5. How do I know if my devices are connected?
When Bluetooth is turned ON, on your phone you will see a Bluetooth symbol appear on
your main screen that changes slightly (colours invert or arrows appear) when connected to
the Z9. Some phones show a Headset or Car symbol to notify you that the devices are
connected.
6. Can I connect more than one device to my Z9 at the same time?
No, the Z9 will only allow one device to be connected at a time.

7
7. How far can my mobile be from the Z9 and still remain connected?
The Z9 will remain connected within a range of 10 meters (30 ft). Sound quality may start to
deteriorate after about 7 meters depending on your environment.
8. Can other electrical devices cause interference with Bluetooth?
Bluetooth technology employs a technique called frequency hopping to constantly change
the frequency at which it sends data, reducing interference with wireless devices like
wireless LAN’s, cordless landline phones. Noise Interference can occur if the Bluetooth
device is used in close proximity with a microwave. Check if there are any such devices in
the surroundings, and if so keep the distance between the Z9 and such devices to at least 5
- 10m. Usually any interference will only cause a slight crackling sound. The frequency of
Bluetooth is much higher than that of radio station bands.
9. If I cup my hand over a Bluetooth device the signal strength and quality suffers.
Why does this happen?
Bluetooth signals are radio waves and so do not need line of sight to operate. However,
radio waves cannot travel through water and as the human body is made up of mostly water
they cannot travel through it. Therefore, your hand will create a barrier causing slight
interference and a loss of signal quality.
10. What Bluetooth mobile phones can use the Z9 headset?
V2.0 is the current version of Bluetooth with Enhanced Data Rate (EDR) technology, with
data transfer rates of up to 3Mbps compared with 1Mbps in V1.2.
Note: All BlueAnt products are forward and backward compatible (Our V1.2 products can be
used with V2.0 phones and our V2.0 products can be used with V1.2 phones)
11. What is the difference between Bluetooth V1.2 and V2.0?
V2.0 is the current version of Bluetooth with Enhanced Data Rate (EDR) technology, with
data transfer rates of up to 3Mbps compared with 1Mbps in V1.2.
Note: All BlueAnt products are forward and backward compatible (Our V1.2 products can be
used with V2.0 phones and our V2.0 products can be used with V1.2 phones)
12. How do I use VOIP?
In order to use the Z9 for VoIP, you will need to have a Bluetooth enabled PC or laptop. If
you are running Windows XP or Vista please ensure to update your Bluetooth driver from
your PC/Laptops manufactures web site to ensure you have the latest driver. Once the Z9

8
has been paired to your PC/Laptop ensure that the VoIP applications audio settings are set
to the Bluetooth Headset for both incoming and outgoing audio.

9
Troubleshooting
1. How do I re-connect my Z9?
Press the MFB button once shortly to re- connect to the first paired phone.
(Voice dial will be activated if enabled in phone, short press MFB to cancel this). Short
press the Vol Up & Vol Down together to disconnect.
2. Why won’t my Z9 go into pairing mode?
If you have already paired 3 different phones to the Z9 you will need to reset it to pair a new
device. To Reset the Z9, Short press all three buttons, this will delete all pairing information
and enter pairing mode.
The Z9 sometimes requires a few seconds to establish a connection.
Please be patient while devices are searching.
3. The Z9 won’t reset. What can I do?
Ensure that the Z9 is not connected to any phone and press the Volume up, Volume down
and the MFB together to reset. If this does not resolve your issue please contact Technical
Support.
4. Is my Z9 charged?
The LED will blink red instead of Blue when the battery is low.
A constant red light will show when the headset is plugged in and charging. It will turn off
when fully charged.
If the Z9 is turned on while charging you will see a purple flash while charging.
5. Why can’t I hear any sound from the Speaker?
The phone’s memory may have become corrupt and can be fixed by rebooting the phone. If
this does not resolve the issue, delete the pairing information and re-pair.