Blueant CT User manual

CONNECT
USER GUIDE
Read Me to Get the Most Out of
Your Device...
• ENGLISH
• FRANÇAIS
• ESPAÑOL

TO GET STARTED
1. Turn The Connect On
2. Put It On
3. Listen In
Model: CT

Contents
Charge Your Earpiece 6
Wearing the Connect 7
Pair Your Earpiece 7
Use Your Voice to Control the Connect 8
Making Calls 10
Taking Calls 12
Volume Control 12
Changing the Ear Bud 13
Using 2 Phones (Multipoint) 14
Call Waiting and Conferencing* 14
Listening to Audio 16
Reset the Connect 17
Free Android Application 18
Reconnecting to the Earpiece 19
Button Commands 19

Help and Support 22
Terms and Conditions 22
Contact Us 24

5
Welcome to the BlueAnt Connect: the most brilliantly designed
ergonomic earpiece, featuring BlueAnt’s intuitive voice user
interface.
Designed for comfortable extended wear, the Connect also
comes with Siri and Google Voice Actions integration, rapid
charge technology to keep you connected, and high quality
true-to-life audio.
Volume
Rocker
Control
Command
Button
Microphones
Indicator Light
Charging
Port

6
Charge Your Earpiece
Your earpiece has been given an initial partial charge to get you
started, but for best results we recommend you fully charge it
using the supplied USB cable and adaptor.
> Charge the Connect whenever it announces that the battery
is Very Low. It will switch off automatically if the battery
runs out.
> Your earpiece features Rapid Charge technology. It will
charge to 50% capacity in just 30 minutes (a full charge takes
about 2 hours).
> During charging, the indicator light flashes red.
> When the light goes white,
the charge is complete.
> The Connect features an
iPhone battery meter
so you can check
your battery
status at a glance.
Charging
Port
Hardware
Power Switch

7
Wearing the Connect
You can wear the Connect in either ear. For best results:
> Rotate the ear gel as shown here.
> Make sure that the earpiece is angled towards your mouth.
LEFT
EAR
RIGHT
EAR
Pair Your Earpiece
To use the Connect you need to pair it with your phone.
1. Slide the hardware power switch across to turn the Connect
on and then put the Connect in your ear.
2. If this is the first time you have used the Connect it will go

8
straight to pairing mode. The voice prompts will start to talk
you through the pairing process.
For subsequent pairings, click the Command button and
wait for the Connect to ask you to Say A Command. Then
say Pair Me.
3. Follow the voice prompts to pair the Connect with your
phone. If requested, the pairing code is 0000 (four zeros).
Note: If your phone prompts you to allow a connection to the
Connect, you must select “YES” or “OK”.
Use Your Voice to Control the Connect
Phone
Commands
3
Say A
Command
21
The Connect is voice controlled. Simply:
1. Click the Command button

9
2. Wait for the Connect to ask you to Say A Command
3. Say the command:
Command Description
Am I
Connected?
The Connect will check if your phone is
connected, and attempt to connect if not.
Call Back Calls back the last incoming call.
Check Battery Tells you the battery level on the Connect.
Pair Me Puts the Connect into pairing mode. Any
connected phone will be disconnected.

10
Command Description
Phone
Commands
Activates your phone’s voice dialing
feature (if supported). Depending on
your phone model, you may need to
record voice tags on the phone to use this
feature.
On the iPhone 4S this command activates
Siri.
On Android devices this command
activates Google Voice Actions.
Redial Redials the last outgoing call.
What Can I
Say?
Tells you the available voice commands.
Making Calls
Voice Dialing
Double click the Command button or use the Phone
Commands voice command to activate your phone’s voice