BMC H-80 Series User manual

H-80 Series Quick Operation Manual V1.0
1 / 2
H-80 Series Quick Operation Manual
1. Button Functions
Mute Button
Press this button to mute the
alert
Knob
Start treatment and
adjust device settings
Back Button
Return to the previous operation.
2. Setting up the Device
3
12
Nasal Cannula
LH2 Breathing Tube
Air Outlet
Main Device
Power Cord
Power Outlet
DC Inlet
Filter Cap
(Air Inlet)
4
A. Connect one end of the LH2 breathing tube to the assembled nasal cannula (as shown in the figure above).
B. Connect the other end of the LH2 breathing tube to the air outlet of the device firmly (as shown in the figure
above).
C. Connect the power cord to the DC inlet of the main device.
D. Plug the other end of power cord to the power outlet.

H-80 Series Quick Operation Manual V1.0
2 / 2
3. Adjusting Device Settings
Connect the power cord and LH2 breathing tube properly,the screen displays the Main Interface shown in the figure
left. Turn the Knob to switch among interfaces and options. Press the Knob to conduct parameters setting
and confirm options.After finishing adjusting device settings, return to the Main Interface and press the Knob
to start treatment.
4. Important Note
Before using the device, read all the information in the user manual and memorize the information related to correct
operation.