BMW Apollo User manual

Retrofit kit No. 84 61 0 143 793
Installation Instructions No. 01 29 0 144 350 Issue date: 12.2001
F 39 0554 2W
BMW
NEU
NUTE
123
456
789
0#
BMW Apollo / Classic car phone upgrade kit
BMW 5 Series touring (E 39/2) from 09/01
These installation instructions are only valid for cars with SA 640
The installation time is approx. 2.5 hours, but this may vary depending on the condition of the
car and the equipment in it.
Retrofit kit: 84 61 0 143 793
Parts and Accessories
Installation Instructions

EN/2
Retrofit kit No. 84 61 0 143 793
Installation Instructions No. 01 29 0 144 350 Issue date: 12.2001
Contents
Section Page
Important information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Installation and cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. To install and connect the hands-free control module . . . . . . . . . . . . . . . . . . . . . . . 7
5. To install and connect the eject box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6. To install the hands-free microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7. Concluding work and coding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

EN/3
Retrofit kit No. 84 61 0 143 793
Installation Instructions No. 01 29 0 144 350 Issue date: 12.2001
Important information
This upgrade kit is for use within the BMW dealership organisation only.
Target group
The target group for these installation instructions is specialist personnel trained on BMW cars
with specialist knowledge of vehicle electrical systems.
Work:
All servicing, repair and installation work on BMW cars is completed at your own risk.
All work is to be carried out using current BMW
- Repair manuals
- Circuit diagrams
in a rational order using the prescribed tools (special tools) and observing current health and
safety regulations.
Ordering instructions
Centre console insert
A black insert for the centre console is supplied in the upgrade kit.
An insert for the centre console in other colours for cars with different interior colours can be
ordered if required. See the EPC for all further ordering information.
Safety instructions
The current accident prevention regulations must be followed.
Refer to the safety instructions for handling components of the airbag system. Further
information is available in the TIS in RA No. 32 34 ... If you fail to follow the safety instructions
the airbag system may deploy incorrectly and cause injuries.
List of special equipment
The following special equipment must be taken into consideration when installing the upgrade
kit. The various sections contain corresponding information.
SA 401 Tilt and slide sunroof

EN/4
Retrofit kit No. 84 61 0 143 793
Installation Instructions No. 01 29 0 144 350 Issue date: 12.2001
1. Preparations
0
TIS instruction No.
Conduct a brief test
Disconnect the negative pole of the battery 12 00 ...
The following components must be removed first of all:
Left boot – wheel arch trim 51 47 151
Fresh air grille in the rear 64 22 190
Armrest (no longer required)
Hands-free microphone trim

EN/5
Retrofit kit No. 84 61 0 143 793
Installation Instructions No. 01 29 0 144 350 Issue date: 12.2001
2. Installation and cabling diagram
0
Legend
0
1 Hands-free microphone
2 Eject box and interface
3 Adapter eject box
4 Transceiver module
5 Transceiver module adapter
21
4
5
3
039 0063 Z

EN/6
Retrofit kit No. 84 61 0 143 793
Installation Instructions No. 01 29 0 144 350 Issue date: 12.2001
3. Connection overview
0
0
Item Description Signal
Cable colour
/ Cross-
section
Connection location in the car Abbreviation /
Slot
A Adapter eject box --- --- Between the standard wiring
harness and interface ---
A1 Black 18-pin plug --- --- To interface X4545
A2 Black 18-pin plug --- --- To standard wiring harness X4545
B Hands-free control module
adapter --- ---
Between the standard wiring
harness and hands-free control
module
---
B1 White 18-pin plug --- --- To standard wiring harness X18618
B2 Blue 26-pin plug --- --- To standard wiring harness X18626
B3 Black 25-pin plug --- --- To transceiver module X13324
C Aerial adapter --- --- Between the standard wiring
harness and transceiver module ---
C1 FAKRA socket contact --- --- To standard aerial cable ---
C2 Mini UHF plug contact --- --- To transceiver module ---
A2
A
A1
C1 C2
C
B2
B1
B3
B
053 0104 Z

EN/7
Retrofit kit No. 84 61 0 143 793
Installation Instructions No. 01 29 0 144 350 Issue date: 12.2001
4. To install and connect the hands-free control module
0
0
0
0
0
Insert the transceiver module (1) into the holder (2)
and secure it with the bar (3).
0
Bolt the holder with the transceiver module (1) to
the body stud (3) on the left-hand side of the boot
using hexagonal screws M5 (2).
0
Connect the aerial adapter C between the
transceiver module (2) and the car’s aerial
cable (3).
Connect branch B3 to the transceiver module (2).
0
Release the tied back coding plug (1) from the
standard wiring harness.
Disconnect the black plug X4117 and the blue
plug X3609 .
Connect the two plug plugs X4117 .
1
2
1
039 0064 Z
2
2
3
3
1
039 0065 Z
B3
2C
1
039 0133 Z
X4117
X4117
1
1
2
X3609
039 0147 Z

EN/8
Retrofit kit No. 84 61 0 143 793
Installation Instructions No. 01 29 0 144 350 Issue date: 12.2001
4. To install and connect the hands-free control module
0
0
Release the tied back plugs X18618 and X18626
from the standard wiring harness.
Connects branches B1 and B2 to plugs X18618
and X18626 .
X18618
X18626
B1
B2
039 0124 Z

EN/9
Retrofit kit No. 84 61 0 143 793
Installation Instructions No. 01 29 0 144 350 Issue date: 12.2001
5. To install and connect the eject box
0
0
0
0
0
Clip the eject box (1) into the supplied armrest (2).
0
Place the slide plate (1) on the armrest (2) and
secure it with Philips screws (3).
0
Bolt the holder (1) for the interface to the centre
console (2) with Philips screws (2).
0
Connect the black 12-pin plug (1) for the eject box
to the interface (2).
Insert the interface (2) into the holder (3).
1
2
039 0059 Z
3
1
2
039 0060 Z
2
1
3
039 0057 Z
1
2
3
039 0058 Z

EN/10
Retrofit kit No. 84 61 0 143 793
Installation Instructions No. 01 29 0 144 350 Issue date: 12.2001
5. To install and connect the eject box
0
0
0
Connect the black 6-pin plug (1) for the eject box
to the black 6-pin plug (2) for the interface.
0
The adapter cable A must be fitted.

Connect the adapter cable A between the black
18-pin plug for the interface and plug X4545 on the
standard wiring harness.
21
038 0068Z
X4545 1
A
039 0069 Z