BMW 54 13 086 Instruction Manual

54 13 086 Removing and installing panoramic glass sunroof
Overview of Activities
A
dditional Information
Preliminary Work
Removing the front panorama glass roof panel1
Removing the rear panorama glass roof panel
2
Removing the covers for the interior mirror
3
Remove both sun visors and counter supports4
Remove both microphones
5
Removing front vanity mirror light
6
Removing the roof function centre (FZD)
7
Remove left and right A-pillar trim panel
8
Partially removing both B-pillar trim panels9
Remove interior roof light
10
Removing the C-pillar trim panel on the left and right
11
Removing the D-pillar trim panels on the left and right12
Removing all coat hooks
13
Clip in the 3rd Removing the brake light14
Lowering headlining (equipment specification with panoramic glass sunroof)
15
Main Work
Remove complete panorama glass roof16
Install complete panorama glass roof
17
Postprocesses
Installing (retracted) headlining (in version with panorama glass roof)18
Clip in the 3rd Installing the brake light
19
Installing all coat hooks20
REP-REP-P-5413086-F44 V - 1
V
IN: XXX23ALXXXXXXXXXX
2/1/2021 1/42© Copyright BMW Group - Subject to printing errors, mistakes and technical changes.

Installing the D-pillar trim panel on the left and right
21
Installing the C-pillar trim panel on the left and right22
Install interior roof light
23
Partially installing both B-pillar trim panels
24
Install the A-pillar trim panel on the left and right25
Installing roof function centre (FZD)
26
Installing front vanity mirror light27
Installing both hands-free microphones
28
Install both sun visors and counter supports
29
Installing the covers for the interior mirror30
Installing the rear panorama glass roof lid
31
Installing the front panorama glass roof panel
32
Checking the adjustment of the panorama glass roof33
Adjusting rear panorama glass roof lid
34
Adjusting the front panorama glass roof panel35
Initialise panorama glass roof
36
REP-REP-P-5413086-F44 V - 1
V
IN: XXX23ALXXXXXXXXXX
2/1/2021 2/42© Copyright BMW Group - Subject to printing errors, mistakes and technical changes.

A
dditional information is available.
General information
WARNING
Danger! Life-threatening injuries!
RISK OF DAMAGE
Damage to or destruction of electrical components.
61 35 ... Notes on ESD protection (Electro Static Discharge)
PRELIMINARY WORK
1–Removing the front panorama glass roof panel
Pyrotechnic components.
• All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel
only.
• Replace any damaged part or ones that have been dropped.
• For additional information see: 72 00 Safety regulations on handling components with gas generators.
Electrostatic discharge.
• Leave electrical components in original packaging until just before they are installed. Use the original packaging
only for any return shipments. Always package removed components straight away.
• Read and comply with user information on using the associated special tool 12 7 060.
• Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
• Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
• For additional information see: 61 35 ... Notes for ESD protection (electrostatic discharge)
• Slightly open the front panoramic glass sunroof-cover (1)as shown.
REP-REP-P-5413086-F44 V - 1
V
IN: XXX23ALXXXXXXXXXX
2/1/2021 3/42© Copyright BMW Group - Subject to printing errors, mistakes and technical changes.

2–Removing the rear panorama glass roof panel
3–Removing the covers for the interior mirror
RISK OF DAMAGE
Any screws or foreign objects remaining at the installation
location or in the component may damage the panorama
glass roof.
• Release the screws (1)on the left and right.
• Remove the panoramic glass sunroof cover (2).
• Place the panoramic glass sunroof cover (2)in such a way that the
circular seals are not damaged.
Damage to the panorama glass roof or the mechanics
of the panorama glass roof.
• Ensure that no screws or other foreign objects are left
behind.
RISK OF DAMAGE
Any screws or foreign objects remaining at the installation
location or in the component may damage the panorama
glass roof.
• Fold the screen (1)slightly downwards.
• Loosen screws (2).
Damage to the panorama glass roof or the mechanics
of the panorama glass roof.
• Ensure that no screws or other foreign objects are left
behind.
• Lift the front panoramic glass sunroof cover (A).
• Feed out the rear panoramic glass sunroof cover (B)with the water
channel from the roof.
• Position the panoramic glass sunroof cover in such a way that the
circular seals are not damaged.
• Have the set of special tools 0 493 752 (00 9 329) ready.
REP-REP-P-5413086-F44 V - 1
V
IN: XXX23ALXXXXXXXXXX
2/1/2021 4/42© Copyright BMW Group - Subject to printing errors, mistakes and technical changes.

4–Remove both sun visors and counter support
s
NOTICE
Description is for left component only. Procedure on the right side is identical.
▶Remove the sun visor and the counter support
NOTICE
Schematic diagram is for example purposes. Some parts may
differ in certain details.
• Remove the covers (1)with a suitable tool in the direction of arrow.
• Have the set of special tools 0 493 752 (00 9 329) ready.
• Detach sun visor from counter support (1).
REP-REP-P-5413086-F44 V - 1
V
IN: XXX23ALXXXXXXXXXX
2/1/2021 5/42© Copyright BMW Group - Subject to printing errors, mistakes and technical changes.

◀
5–Remove both microphone
s
NOTICE
Description is for left component only. Procedure on the right side is identical.
▶Remove hands-free microphone
• Unclip the cover (2)with a suitable tool.
• Press clamp (3)together and remove the sun visor.
• Unlock associated plug connection and disconnect.
• Unclip the cover (1)with a suitable tool.
•Releasescrew(2)and pull the counter support (3)out of the
headlining.
• Unscrew retaining lugs (1)with the special tool 0 493 687 (00 9 340)
.
• Unlock plug connection and disconnect.
• Remove hands-free microphone (2).
REP-REP-P-5413086-F44 V - 1
V
IN: XXX23ALXXXXXXXXXX
2/1/2021 6/42© Copyright BMW Group - Subject to printing errors, mistakes and technical changes.

◀
6–Removing front vanity mirror light
NOTICE
Description is for left component only. Procedure on the right side is identical.
• Lever out the front vanity mirror light (1)by using a special tool
0 496 569 (00 9 325) from the headlining (2).
• Unlock and disconnect connector (1).
• Remove the front vanity mirror light (2).
REP-REP-P-5413086-F44 V - 1
V
IN: XXX23ALXXXXXXXXXX
2/1/2021 7/42© Copyright BMW Group - Subject to printing errors, mistakes and technical changes.

7–Removing the roof function centre (FZD)
8–Remove left and right A-pillar trim panel
NOTICE
Description is for left component only. Procedure on the right side is identical.
▶Remove the A-pillar trim panel
Additional information is available.
WARNING
Danger! Life-threatening injuries!
• Carefully unclip and remove the trim (1)using special tool
0 496 569 (00 9 325) at the marks.
• Unlock clamps on the left and right using a screwdriver in the
direction of the arrow.
• Release the rear latch mechanisms (1).
• Remove the roof function centre (FZD) (2)from the headlining (3).
• Unlock all plug connections and disconnect.
Pyrotechnic components.
• All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel
only.
• Replace any damaged part or ones that have been dropped.
• For additional information see: 72 00 Safety regulations on handling components with gas generators.
REP-REP-P-5413086-F44 V - 1
V
IN: XXX23ALXXXXXXXXXX
2/1/2021 8/42© Copyright BMW Group - Subject to printing errors, mistakes and technical changes.

RISK OF DAMAGE
Improper use of a tool when removing the trim panel may damage the head airbag.
◀
9–Partially removing both B-pillar trim panel
s
NOTICE
Description is for left component only. Procedure on the right side is identical.
▶Partially remove B-pillar trim panel
Damage to the head airbag.
• Do not use sharp-edged tools when removing the trim panel.
• Have the set of special tools 0 493 752 (00 9 329) ready.
• Unclip the cover (1)with suitable tools.
• Loosen screw (2).
• Unclip A-pillar trim panel (3)with clips (4)and guide it out upwards.
• Unclip clips (3).
• Feed B-pillar trim panel (1)out of the front and rear lip of edge
protections and the guides (2).
REP-REP-P-5413086-F44 V - 1
V
IN: XXX23ALXXXXXXXXXX
2/1/2021 9/42© Copyright BMW Group - Subject to printing errors, mistakes and technical changes.

◀
10–Remove interior roof light
• Have the set of special tools 0 493 752 (00 9 329) ready.
• Lever interior roof light (1)out of clamps (2)using a suitable tool.
• Unlock plug connection and disconnect.
REP-REP-P-5413086-F44 V - 1
V
IN: XXX23ALXXXXXXXXXX
2/1/2021 10/42© Copyright BMW Group - Subject to printing errors, mistakes and technical changes.