Body Craft F320 User manual

INSTRUCTION MANUAL
ECONO FLAT / INCLINE / DECLINE BENCH
MODEL : F320
Bodycraft is a division of Recreation Supply Inc.
P.O. BOX 181
Sunbury, OH 43074
QUESTION?
As a quality home gym supplier we are committed to your complete satisfaction. If you have
questions, or find missing or damaged parts, we will guarantee your complete satisfaction through
our authorized dealer service centers or our home office customer service department. Please call
your local dealer for assistance or BodyCraft at 800-990-5556 (9:00 AM - 5:00 PM). Our trained
technicians will provide immediate assistance to you, free of charge.

1
BEFORE YOU BEGIN
Congratulations and thank you for selecting the Econo flat / incline / decline bench
strength training system.The Econo flat / incline / decline bench offers an impressive 
array of strength training exercises to develop every major muscle group of the 
body. Whether your goal is cardiovascular fitness, a shapely, toned body or 
dramatic muscle size and strength, the Econo flat / incline / decline bench will help 
you achieve the specific results you want.
For your safety and benefit, read this manual and the accompanying literature
before using the Econo flat / incline / decline bench. Keep this manual for future 
reference. If you have additional questions, please call your local BODYCRAFT 
dealer or our customer service department at 800-990-5556 Monday through Friday,
9 a.m. until 5 p.m. Eastern Time.
IMPORTANT SAFETY NOTES
There is a risk assumed by individuals who use this type of equipment.
Before beginning this or any other exercise program consult your physician.
This is especially important for individuals over the age of 35 or persons
with pre-existing health problems. Recreation Supply, Inc. assumes no
responsibility for personal injury or property damage sustained by or
through use of this product.
1.This product must be assembled on a flat, level surface to assure its
proper function.
2.Clean pads and frame on a regular basis. We recommend warm,
soapy water. Do not use harsh or abrasive chemicals.
3.Inspect and tighten all parts before every use. Replace any worn
parts immediately. Failure to do so may result in serious injury.
4.Keep children away from the Econo flat / incline / decline bench at all times.
5.Keep your hands away from moving parts.
6.When adjusting the seat, make sure the spring pin is fully engaged.
If not, the seat may slip and cause serious injury.
7.Exercise with care to avoid injury.
8.If unsure about the proper use of the Econo flat / incline / decline bench 
strength training system call your local BODYCRAFT dealer or our customer 
service department at 800-990-5556.

26
6
36
40
10
17
15
15
24
24
9
14
18
40
21
11
33 37
37
11 3
14
7
4
17 12
34
39
41
41
11
11
19
43
43
44
44
45
12
12
35
35
38
38
19
19
19
5
19
19
25
8
8
32
32
39
31
37
37
13
23 20
22
21
16
38
38
2
EXPLODE VIEW

PARTS CHART
0
(inch) 1" 2" 3"1/21/4 3/4 1/2 1/2 4" 5" 6"1/2 1/2 1/2
NO. DESCRIPTION QTY.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
1
1
1
1
1
2
1
2
1
1
4
3
1
2
2
1
2
1
6
1
1
1
1
2
1
1
1
2
2
2
2
2
4
4
4
3
2
2
2
2
2
SEAT SUPPORT
SEAT SLIDER
FRONT STABILIZER
FRONT UPRIGHT
BACK SUPPORT
SEAT HINGES
KNEE HOLD DOWN
SUPPORT PLATE
FOAM PAD HOLDER
U PIN
45mm X 75mm END RECT. CAP
45mm X 75mm END RECT. PLUG
50mm END SQ. PLUG
45mm END SQ. PLUG
1" ROUND PLUG
1" ROUND PLUG (SMALL)
RECT. BUSHING
SPACER
STEEL BUSHING
METAL CAP
3/8" POP PIN
1/2" POP PIN
KNOB
FOAM PAD
BACK PAD
SEAT PAD
1/2" X 4-3/4" HEX HEAD BOLT
1/2" X 4" HEX HEAD BOLT
1/2" X 2-3/4" HEX HEAD BOLT
3/8" X 4" HEX HEAD BOLT
3/8" X 2-3/4" HEX HEAD BOLT
3/8" X 1" HEX HEAD BOLT
1/2" WASHER
3/8" WASHER
3/8" WASHER (SMALL)
1/2" NYLON NUT
1/2" NYLON NUT (THINNER)
3/8" CAP NUT
WHEEL
5/16" X 1-1/2" HEX HEAD BOLT
5/16" X 8.5mm NYLON NUT
3
12
3 4
31
11 16
18
23
20 21 22
25
24 26
17 19
12 13 14 15
32 33
34 35 36
37 4038 4139 42
43 44 45
5 6
7 8 9 10

4
ASSEMBLY INSTRUCTION
Do not tighten bolts until instructed.
1. Attach two End Caps (11) and two End Plugs (12) onto Seat Support (1), then slide
Seat Slider (2) into Seat Support (1). Attach End Plug (13) onto Seat Slider (2).
2. Attach two End Caps (11) on Front Stabilizer (3).
Attach Front Upright (4) to Front Stabilizer (3),
using two Bolts (33), two Washers (37)
and two Nuts (40).
3. Attach Front Upright (4) to Seat Support
(1) using two Hex Bolts (34), four
Washers (39) and two Nuts (42). Screw
Tension Knob (23) onto Seat Silder (2).
4. Attach Wheel (43) to the bracket of
Set Support (1) using Hex Bolt (44)
and Nuts (46).
5. Attach Seat Hinges (6) and Back Support (5) onto Seat Slider (2) using 1/2" X 4-3/4"
Hex Bolt (31), two Washers (37) and Nut (40) for Back Support (5).
6. Attach Support Plate (8) (one end pre-assembled to
Back Support (5) ) to Seat Support (1), using Bolt (32)
and Nut (41). Loosen bolt approximately 1/2 turn so
that Support Plate (8) pivot freely.
7. Attach Seat Pad (26) to Seat Hinges (6)
using Bolts (36) and Washers (38), Back
Pad (25) to Back Support (5) using Bolts
(35) and Washers (38).
8. Slide 50 SQ. Spacer (18) onto Front Upright
(4), then insert Knee Hold Down (7) into
Front Upright (4). Attach End Plug (14) onto
Knee Hold Down (7).
9. Insert Foam Pad Holder (9) into Knee Hold Down
(7) and slide Foam Pad (24) onto Foam Pad Holder
(9) and attach 1" round End Plug (15) to each end.
Slide seat to front to get decline position.
Please ensure all parts attached and tighten bolts.
221 22
23
26
25
10
1
7
11
11
34
39
39
12
16
13
23
11
11
33
37
40
4
2
3
12
44
44
43
43
45
1
25
26
24
24
15
15
12
41
5
8
1
6
14
14
7
9
32
35
38 35
38
2
4
18
31
37
37
40
38
36

5
Assembly is complete! Please take the following steps before using the
BODYCRAFT ECONO FLAT / INCLINE / DECLINE BENCH:
1.
2.
Make certain all bolts are tightened securely.
Enjoy many years of a Fit Lifestyle.
Thank you for purchasing the Bodycraft Econo flat / incline / decline bench
Machine Training System. If You have any questions, please call your
local BodyCraft dealer or call our customer service department at
800-990-5556