Body Craft MINI-XPress User manual

INSTRUCTION MANUAL
STRENGTH TRAINING SYSTEM
Press
X
MINI-
7353
Bodycraft is a division of Recreation Supply Inc.
P.O. BOX 181
Sunbury, OH 43074
QUESTION?
As a quality home gym supplier we are committed to your complete satisfaction. If you have
questions, or find missing or damaged parts, we will guarantee your complete satisfaction through
our authorized dealer service centers or our home office customer service department. Please call
your local dealer for assistance or BodyCraft at 800-990-5556 (9:00 AM - 5:00 PM). Our trained
technicians will provide immediate assistance to you, free of charge.

209
209
209
209
205
205
205
205a
205a
205a
205a
205
203
219
216
216
202
201
212
204
38
215
208
210
210
213
206
214
214
211
218
218
217
217
207
216
216
219
203
OVERVIEW
1

201
202
203
204
205
205a
206
207
208
209
210
211
212
213
214
215
216
217
218
219
1
1
2
1
4
4
1
1
1
4
2
1
1
1
2
2
4
2
2
2
201 202
204
205 205a
209
213
217 218 219
214 215
216
210 211
212
206 207
208
203
LEG EXTENSION CONNECTOR
LEG EXTENSION ARM
FOAM ROLLER HOLDER
CONNECTING CABLE
FOAM PAD
FOAM PAD COVER
STOPPER
AXLE
50mm SQ. PLUG
1" ID FOAM ROLLER PLUG
3/8" BUSHING
3/8" X 2-1/2" HEX BOLT
3/8" X 1-1/2" HEX BOLT (ALL)
3/8" X 5/8" INNER HEX SCREW
5/16" X 5/8" INNER HEX SCREW
5/16" X 1/2" INNER SCREW
3/8" WASHER
5/16" WASHER
5/16" SPRING WASHER
3/8" NYLON NUT
PARTS LIST
NO. DESCRIPTION QTY.
01/4 1/2 3/4 1/4 1/2 3/4 1/4 1/2 3/4 1/4 1/2 3/41" 2" 3" 4" 1/4 1/2 3/4 1/4 1/2 3/45" 6"
(inch)
2

STEP 1
3
1
210
210
203
203
202
201
208
209
209
209
209
205
205
205
205
214
214
211
218
218
217
217
207
216
216
219
1.Attach the Leg Extension Connector (201) to the Seat Frame using one 3/8" X 2-1/2" Hex
Bolt (211), two 3/8" Washers (216), and one 3/8" Nut (219).
2.Insert two 3/8" Bushings (210) into the Leg Extension Arm (202 ) and attach to the Leg
Extension Connector (201) by inserting the Axle (207). Fasten Axle (207) using two 5/16"
Washers (217), two 5/16" Spring Washers (218) and two 5/16" X 5/8" Inner Hex Screws.
Check to ensure the Leg Extension Arm pivots freely.
3.Insert the chromed Foam Roller Holder (203) into the hole of Leg Extension Connector
(201). Moisten the inside holes of the two Foam Pads (205) with water and then slide
them onto each end of the Foam Roller Holder (203). Cap the Foam Roller Holders with
1" ID Foam Roller Plugs (209).
4.Insert the chromed Foam Roller Holder (203) into holes in Leg Extension Arm (202).
Moisten two Foam Pads (205) with water and slide onto each end of the Foam Roller
Holder. Cap the Foam Roller Holder with 1" ID Foam Roller Plugs (209). Attach one
50mm SQ. Plug (208) to the Leg Extension Arm.

DETAIL A
STEP 2
To perform leg extensions, or leg curls, set both Cable Arms to lowest level, then
attach Connecting Cables (204), welded on Leg extension Arm to each Snap Hook
on Cable Arm.
Hook Connecting Cable (204) on clip welded on Seat Frame as shown C2
while not use.
CONNECTING CABLE (204)
C1
K2
C2
C1
219
216
216
212
38
C2
K2
4