BOMBAY 2222161 User manual

2222161
O-Remington Dining Table
Page 1 of 2 R1-04-01-05
Parts and Hardware List
A. Table Top 1 pc
B. Mounting Plate 1 pc
C. Post 1 pc
D. Base 1 pc
E. Long Allen Head Bolts 4 pcs
F. Medium Allen Head Bolts 4 pcs
G. Short Allen Head Bolts 4 pcs
H. Lock Washers 12 pcs
I. Flat Washers 12 pcs
J. Allen Head Wrench 1 pc
K. Optional Allen Head Screwdriver Bit 1 pc
∗ Please make sure that you have all the parts and hardware indicated above before you begin assembly of this item.
∗ This item should be assembled on a soft surface to prevent scratching of the finish during assembly.
∗ This item may require periodic tightening.
∗ Take care not to overtighten bolts if using supplied Allen Head Screwdriver Bit.
Hardware Illustrations
E. Long Allen Head Bolt F. Medium Allen Head Bolt
G. Short Allen Head Bolt H. Lock Washer
I. Flat Washer

2222161
O-Remington Dining Table
Page 2 of 2 R1-04-01-05
Assembly Instructions
1. Attach Mounting Plate (B) Align the pre-drilled holes in the Mounting Plate (B) with the pre-threaded holes in the
top end of Post (C). Make sure the dowels of Post (C) align with the pre-drilled holes in the the Mounting Plate (B).
Secure with Medium Allen Head Bolts (F), Lock Washers (H) and Flat Washers (I) using Allen Head Tool (J or K).
See Illustration #1.
2. Attach Table Top (A) Put the Table Top (A) upside down on a soft surface. Align the pre-drilled holes in the
Mounting Plate (B) with the pre-threaded holes in the bottom of Table Top (A). Secure with Short Allen Head Bolts
(G), Lock Washers (H) and Flat Washers (I) using Allen Head Tool (J or K). See Illustration #2.
3. Attach Base (D) Align the pre-drilled holes in the Base (D) with the pre-threaded holes in the bottom end of Post
(C). Make sure the dowels of Post (C) align with the pre-drilled holes in the Base (D). Secure with Long Allen
Head Bolts (E), Lock Washers (H) and Flat Washers (I) using Allen Head Tool (J or K). Adjust levelers on the feet
to keep the table level. See Illustration #2.
JF
H
I
B
C
A
C
D
G
E
H
I
H
I
Illustration #1
Illustration #2