BOMBAY X-Provence Headboard-Queen 1895670 User manual

1895670
X-Provence Headboard-Queen
Parts List
A. Headboard 1 pc
B. Allen Head Bolts 4 pcs
C. Nuts 4 pcs
D. Lock Washers 4 pcs
E. Flat Washers 8 pcs
F. Allen Head Wrench 1 pc
G. Spanner 1 pc
∗Please make sure that you have all the parts and hardware indicated above before you begin assembly of this item.
∗ Use the hardware illustrations to determine correct piece and size.
∗This item should be assembled on a soft surface to prevent scratching the finish during assembly.
Hardware Illustrations
B. Allen Head Bolt C. Nut
D. Lock Washer E. Flat Washer
Page 1 of 2 R1-6-3-04

1895670
X-Provence Headboard-Queen
Page 2 of 2 R1-6-3-04
Assembly Instruction
Headboard can be attached to most standard bed frames (sold separately) that have a universal headboard
bracket end (as shown below).
1. Attach Headboard (A) to Brackets Align the pre-drilled holes in the post of Headboard (A) with the pre-drilled
holes in the bracket ends. Headboard should sit flush to the floor once it is attached. Use the levelers underneath the
headboard posts to adjust the height if necessary to ensure a proper fit. Insert Allen Head Bolts (B) with Lock
Washers (D) and Flat Washers (E) through the posts of Headboard (A) into pre-drilled holes in the bracket ends.
Secure with Flat Washers (E) and Nuts (C) using Spanner (G) and Allen Head Wrench (F). See illustration.
F
B
D
E
E
C
GA
A