BOMBAY Compass 2032461 User manual

2032461
Compass Side Table
Page 1 of 2 R1-9/28/02
Parts and Hardware List
A. Top Assembly 1 pc
B. Legs 4 pcs
C. Shelf 1 pc
D. Allen Head Bolts 8 pcs
E. Lock Washers 8 pcs
F. Flat Washers 8 pcs
G. Allen Head Wrench 1 pc
H. Screws 4 pcs
I. Phillips Head Screwdriver 1 pc
∗ Please make sure that you have all the parts and hardware indicated above before you begin assembly of this item.
∗ Use the hardware illustrations to determine correct piece and size.
∗ This item should be assembled on a soft surface to prevent scratching the finish during assembly.
∗ This item may require periodic tightening.
Hardware Illustrations
D. Allen Head Bolt E. Lock Washer
F. Flat Washer H. Screw

2032461
Compass Side Table
Page 2 of 2 R1-9/28/02
Attach the Legs & Shelf
Parts required
A. Top Assembly 1 pc F. Flat Washers 8 pcs
B. Legs 4 pcs G. Allen Head Wrench 1 pc
C. Shelf 1 pc H. Screws 4 pcs
D. Allen Head Bolts 8 pcs I. Phillips Head Screwdriver 1 pc
E. Lock Washers 8 pcs
1. Place the Top Assembly (A) upside down on a soft surface.
2. Attach Legs (B) Align the pre-drilled holes in the Legs (B) with pre-threaded holes in the apron of the Top
Assembly (A). Secure with Allen Head Bolts (D), Lock Washers (E) and Flat Washers (F) by using Allen Head
Wrench (G). Do not tighten the bolts now. See illustration.
3. Attach Shelf (C) Align the pre-drilled holes in the Shelf (C) with pre-drillled holes in the Legs (B). Secure
with Screws (H) by using Phillips Head Screwdriver (I). Tighten all the Allen Head Bolts (D) now. See
illustration.
FE
D
G
HI
A
B
C
B
B
B
A
B
C
B

2032461
Compass Side Table
Page 3 of 2 R1-9/28/02
Illustration