Bosch FPA-5000 User manual

FPA‑5000 | FPA‑1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
FPE‑8000‑SPC | FPE‑8000‑PPC | FPE‑2000‑SPC | FPE‑2000‑PPC |
FPE‑8000‑FMR
en User Guide

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000 Table of contents | en 3
Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877
Table of contents
1For your safety 7
1.1 Operating the touch screen 7
1.2 Maintenance 7
1.3 Usage in accordance with regulations 8
1.4 Skills required by personnel 8
2For your information 9
2.1 What is new 9
2.2 Open Source license agreement 10
2.3 Calling up the start menu 10
2.4 Changing language display 10
2.5 Warranty and liability 10
2.6 Copyright 10
3All functions at a glance 11
4In overview 13
4.1 Operating elements 13
4.2 Status LEDs 14
4.3 Touch screen 16
4.4 Standby screen 18
4.5 Display support information 19
5Operating principle 20
5.1 Switch on and switch off 20
5.2 Initial setup 21
5.3 Logging on and off 22
5.3.1 Logging on 22
5.3.2 Logging off 22
5.4 Access authorization 22
5.5 Calling up the start menu 23
5.6 Personalized menu 23
5.7 Selecting the menu 23
5.8 Returning to the previous selection 23
5.9 Working with lists 24
5.9.1 Scrolling through lists 25
5.9.2 Various states of list fields 25
5.9.3 Assigning mode 26
5.10 Search Function/Element 26
5.10.1 Search by name 26
5.10.2 Searching by number 27
5.11 Entering numbers and text 27
5.11.1 Changing an entry 28
5.11.2 Deleting all numbers 28
5.12 Changing language display 28
5.12.1 Entering by shortcut 28
5.12.2 Change language by menu 28
5.13 Switching between status bars 29
5.14 Standby 29
5.15 Logical and physical addressing 29
6Networking via Ethernet 30
6.1 IP settings 30

4en | Table of contents FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
2020-07 | 3.0 | F.01U.378.877 User Guide Bosch Sicherheitssysteme GmbH
6.2 Diagnostics 30
7Remote keypad 32
7.1 Operation and display 32
7.2 Connecting to remote panel 32
8Alarm 34
8.1 Types of alarm 34
8.2 Entry delays 34
8.3 Day and night mode 35
8.4 Alarm message to the panel 36
8.4.1 Optical and acoustic signals 36
8.4.2 Displaying the detector zones in alarm state 36
8.4.3 Sequence of the alarm messages 37
8.4.4 Information about logical zones in the alarm state 37
8.4.5 The newest message 38
8.4.6 Displaying the individual detectors in a logical zone 38
8.4.7 Information about individual detectors 38
8.4.8 Displaying additional information 39
9Fire alarm 40
9.1 Evacuation 40
9.2 Optical and acoustic signals 41
9.3 Acknowledging a message 41
9.4 Silence internal buzzer 41
9.5 Activate and silence signaling devices 41
9.6 Resetting signaling devices and transmission devices 41
9.7 Triggering fire verification 42
9.7.1 Alarm verification 42
9.7.2 Starting time to investigate 42
9.7.3 Triggering alarm manually 43
9.8 Resetting alarm message 43
9.9 Bypassing detectors 44
10 Fault message 45
10.1 Calling up fault indication 45
10.2 Fault message on the panel 45
10.2.1 Acknowledging a message 45
10.2.2 Sequence of the fault messages 46
10.2.3 Information about malfunctioning element groups 46
10.2.4 The newest message 46
10.2.5 Displaying individual elements of an element group 47
10.2.6 Information about individual elements 47
10.2.7 Displaying additional information 47
10.2.8 Signals 48
10.3 Resetting fault message 48
10.4 Blocking an element 49
11 Bypass 50
11.1 Menu overview 50
11.2 Bypassing and un-bypassing elements 50
11.3 Displaying and un-bypassing bypassed element groups 50
11.4 Displaying list of all bypassed elements 51
11.4.1 Using the menu 51

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000 Table of contents | en 5
Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877
11.4.2 Via the status bar 51
11.5 Bypassing/Un-bypassing buzzer 51
11.6 Bypassing/Un-bypassing the output to fault warning routing equipment 52
11.6.1 Bypassing the output to fault warning routing equipment 52
11.6.2 Un-bypassing the output to fault warning routing equipment 52
12 Block 54
12.1 Menu overview 54
12.2 Blocking and unblocking elements 54
12.3 Displaying list of all blocked elements 54
12.3.1 Using the menu 54
12.3.2 Via the status bar 55
13 Diagnostics 56
13.1 Menu overview 56
13.2 Element details 56
13.3 Modules 57
13.4 Hardware 57
13.4.1 Display 57
13.4.2 CAN-Bus 58
13.5 Panel Passport 58
13.6 LED Test on modules 58
13.7 Network services 58
13.7.1 Routing table 58
13.7.2 Consistency check 59
13.7.3 Ethernet ports 59
13.7.4 Send ping command 60
13.7.5 Remote services 60
13.8 Voice alarm systems 61
14 Maintenance 63
14.1 Menu overview 63
14.2 Change language 63
14.3 Activate Outputs 63
14.4 Activate Transmission Device 64
14.5 Bypassing/Un-bypassing buzzer 64
15 Maintenance – walktest 65
15.1 Walktest groups 65
15.1.1 Adding or deleting elements 65
15.2 Starting and ending walktest 67
15.2.1 Starting the walktest 67
15.2.2 Ending the walktest 68
15.3 Ending walktest for all elements 68
15.4 Displaying tested or untested elements 68
15.5 Assigning tested elements to a walktest group 68
16 Maintenance – history log 69
16.1 Selecting filters 69
16.2 Setting filters 69
16.3 Change Filter 70
16.4 Combining several filters 70
16.5 Status bar functions 70
16.6 Printing out data 70

6en | Table of contents FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
2020-07 | 3.0 | F.01U.378.877 User Guide Bosch Sicherheitssysteme GmbH
17 Day and night mode 72
17.1 Switching between day and night mode 72
17.2 Showing details 73
17.3 Changing the time for resetting to night mode 73
18 Configuration 75
18.1 Menu overview 75
18.2 Physical node address (PNA/RSN) 75
18.3 Group setting 75
18.3.1 Adding or deleting 75
18.3.2 Change name 77
18.4 Detector sensitivity 77
18.5 Operator 77
18.5.1 Change password 78
18.5.2 Change universal password 78
18.5.3 Set Default Password 78
18.6 Rename elements 78
18.7 Network services 79
18.7.1 Ethernet 79
18.7.2 Change date/time 79
18.7.3 Remote Services 79
18.8 Overview 79
19 Further functions 81
19.1 Menu overview 81
19.2 Change Date / Time 81
19.3 Master password 81
19.3.1 Enter the master password that is valid indefinitely 81
19.3.2 Enter the 24-hour master password 81
19.4 Remote Services 82
19.5 Change password 83
19.6 Performing a fire drill 83
19.7 Alarm Counters 84
20 Reset 85
20.1 Menu overview 85
20.2 Resetting elements 85
21 Control / Monitor 86
21.1 Menu overview 86
21.2 Activate doorholder, control element or HVAC 86
21.3 Go to element 86
21.4 Search for function 86
22 Boot menu 88
Index 89

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000 For your safety | en 7
Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877
1 For your safety
Before using the device, familiarize yourself with these instructions. If you do not read and
understand these explanations, you will not be able to operate the device faultlessly.
The operating instructions do not do away with the need for training by authorized personnel.
Notice!
The device may only be operated by trained personnel. See Skills required by personnel, page
8 .
This user guide does not contain any general or special knowledge about safety issues.
Information on such issues is only given to the extent that it is needed for operation of the
device.
Ensure that you are familiar with all safety-related processes and regulations in your area. This
also includes how to behave in the event of an alarm and the initial steps to take if a fire
breaks out.
The user guide is a statutory part of the system and must be made known to the new owner if
the system is ever sold.
Notice!
The personal access code (consisting of user ID and password) must not be made known to
third parties.
!
Warning!
The device must be shut down by power button. Don’t unplug the device from power supply
while the system is in operation. This could result in the damage of the device. After shutting
down the device correctly restart it via the power button.
1.1 Operating the touch screen
!
Caution!
Do not use any pointed or sharp objects (e.g. screw drivers, pens, etc.) when operating the
touch-sensitive display. The touchscreen may not be exposed to direct sunlight. Both can
seriously damage the touchscreen.
!
Caution!
The recalibration of the panel touchscreen must be performed at least once a year. Otherwise
the operation of the panel may be limited or become even impossible without prior
recalibration.
1.2 Maintenance
Clean the touch screen and surfaces with a slightly damp soft cloth only. Do not use any
cleaning agents and make sure that no liquid enters the inside of the device.

8en | For your safety FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
2020-07 | 3.0 | F.01U.378.877 User Guide Bosch Sicherheitssysteme GmbH
1.3 Usage in accordance with regulations
Notice!
Terminology
The term Walktest, which is used in the fire panel and in the documentation, corresponds to
the EN54‑2 standard term Test condition.
The panel controller is designed for operating the AVENAR panel 8000/2000 fire panel. It can
perform the following tasks:
– Displaying and processing various message types such as alarm and trouble messages
– Bypassing, blocking and resetting elements
– Monitoring and controlling of sounders and outputs
– Performing a walktest
– Display diagnostic information about every LSN element
– Configuration of detectors (short texts and detector sensitivity)
– Performing a drill
– Saving, displaying and printing out events
– Switching the system to day or night mode.
Notice!
The manual control of evacuation zones and the outputs connected to fire protection
equipment (e-Matrix) are user features without regulatory requirements, as these features are
not within the scope of EN54-2.
1.4 Skills required by personnel
Display of event messages on the panel controller must only be processed by trained
personnel.
The system walk test and detector configuration must only be performed by trained,
authorized personnel.

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000 For your information | en 9
Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877
2 For your information
This operation guide contains important information and notes on operating the AVENAR panel
8000/2000.
Using the step-by-step directions, you can familiarize yourself with the individual functions:
– In overview, page 13 provides an overview of the operating and display elements and the
touch screen.
– In Operating principle, page 20 , you will learn how to navigate through the individual
menus and which selection possibilities are available to you.
Each function is described in detail in an individual chapter.
You will find specific topics in the table of contents. If you are already practiced in the
handling of menus, you can use the overview of all menus in All functions at a glance, page
11 .
2.1 What is new
The AVENAR panel 8000/2000 is the successor panel of the FPA-5000/FPA-1200 modular fire
panel. AVENAR panel 8000/2000 combines a new and powerful panel controller platform with
all the well-known stable safety features.
When operating the AVENAR panel 8000/2000 please note the following important
innovations:
Physical node address (PNA/RSN)
The physical node address of the panel is set in the panel firmware when switching on the
panel for the first time. The physical node address dialog replaces the mechanical rotary
switches.
For details see Initial setup, page 21 .
Power button
The panel must be switched on and off with a power button which is located at the right side
of the panel. Also a reboot of the panel is done via the power button.
For details see Switch on and switch off, page 20 .
Calibration of the touchscreen
The calibration of the touchscreen is started via the boot menu, which can be called up during
the boot process of the panel, for details see Boot menu, page 88 .
Refer to
– Boot menu, page 88

10 en | For your information FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
2020-07 | 3.0 | F.01U.378.877 User Guide Bosch Sicherheitssysteme GmbH
2.2 Open Source license agreement
Notice!
Bosch Sicherheitssysteme GmbH uses open source software within this product. The
declaration of the components and their respective licenses can be found on http://
www.boschsecurity.com/oss/.
2.3 Calling up the start menu
4Press .
You can use this key to return from any submenu back to the start menu.
2.4 Changing language display
The panel language can be changed quickly with a shortcut:
1. Press to open the start menu.
2. Press 1 on the alphanumeric keypad.
3. Select OK to confirm the entry or Cancel to cancel the operation.
A list of the existing languages is displayed.
4. Select the language you require.
All display elements are now shown in the selected language.
Notice!
After a system reboot following a power cut or battery failure, the default language set in the
FSP‑5000‑RPS is displayed again.
2.5 Warranty and liability
Warranty and liability claims for personal and property damage are excluded if these were
caused by one or several of the following causes:
– Use of the fire panel contrary to the regulations
– Improper set-up, installation, start-up, operation or maintenance
– Disregarding of the user manual
– Subsequent constructional changes
– Faulty repairs
– Catastrophes, influence of foreign bodies, and force majeure.
Without the permission of Bosch, no changes or additions to or rebuilding of the panel
including the panel controller may be undertaken.
Rebuilding requires written permission. In case of non-approved constructional changes, any
warranty claims against Bosch are voided.
2.6 Copyright
Bosch Sicherheitssysteme GmbH, Robert-Bosch-Ring 5, 85630 Grasbrunn, Germany retains
the complete copyright to the whole documentation. Without the express written permission
of Bosch, no part of these documents may be duplicated or transmitted in any form.
Bosch reserves the right to make changes to this manual without prior notice.

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000 All functions at a glance | en 11
Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877
3 All functions at a glance
Main menu
Bypass Block Diagnostics
Maintenance Configuration
Switch to day mode Further functions
Control Monitoring Reset
Bypass/Block
Bypass
Block
-> Show
blocked/
bypassed
devices
Select by
number
Bypass buzzer Printer
NAC Transmission
device
HVAC Doorholder
Detector Logical zone Extinguishing
system
Annunciator
Bypass/
Block group
More... -> Control element Interface module
Diagnostics
Diagnostics -> Element details Modules
Hardware Panel passport
LED test on modules History log
Network services VAS
Maintenance
Maintenance -> Walktest Change language
Activate outputs Activate transmission device
History log Bypass buzzer
Configuration
Configuration -> Set Physical Node
Address (PNA/RSN)
Set groups
Detector sensitivity Operator
Rename elements Overview
Network services About ...

12 en | All functions at a glance FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
2020-07 | 3.0 | F.01U.378.877 User Guide Bosch Sicherheitssysteme GmbH
Further functions
Further functions -> Change date / time Master password
Remote Services Change password
Drill Alarm counters
Control / Monitoring
Activate doorholder Activate HVAC
Activate control element Search function
Go to element
Reset
Reset -> Event type Scope
Logical zone Detector
This panel

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000 In overview | en 13
Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877
4 In overview
This chapter contains information about the following elements of the panel controller:
– Operating elements, page 13
– Status LEDs, page 14
– Touch screen, page 16
– Display support information, page 19
Fire
2
Control
2
Fault
0
Bypass
0Status
Bypass
Block Diagnostics
Maintenance Configuration
Switch to day mode Further functions
Control
Monitoring Reset
* Level 3 logged in
1
2
4 3 5 6 7 8 9
10
11
DEF
21
ABC
3
4 5 6
GHI JKL MNO
7 8 9
PQRS TUV WXYZ
*0#
F1 F2 F3
,.-_
1 Status LEDs 6 Display a list of the networked panels and establish a
remote connection with a networked panel
2 Information bar 7 Display and control all alarm zones
3 Status bar 8 Log-in to the panel and call up personalized menu
4 Open start menu 9 Silence internal buzzer
5 Go back 10 Function keys, programmable
11 Display support information
4.1 Operating elements
Fixed keys
To select a function, touch the appropriate key.
The following functions can be executed with the fixed keys on the bottom of the display:
"Home" key. Call up the start menu.
Return to the previous selection.
Display a list of the networked panels and establish a remote
connection with a networked panel or a remote keypad.
Display and control all alarm zones.

14 en | In overview FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
2020-07 | 3.0 | F.01U.378.877 User Guide Bosch Sicherheitssysteme GmbH
Log in and out: Enter user ID and password or call up personalized
menu, if you are already logged in.
Temporarily silence the internal buzzer.
"Left arrow" key. Move the cursor one place to the left on the search
screen.
"Right arrow" key. Move the cursor one place to the right on the search
screen.
"Double arrow" key. Switch between status bars if two or more are
available. Call up the status bar to scroll rapidly through lists.
"Enter" key. Confirm an alphanumeric entry. Confirm an entry that is
not confirmed by selecting the OK field on the touch screen.
Alphanumeric keypad
Entry of letters, special characters, and numbers.
Function keys
There are three function keys F1, F2 and F3 which are freely programmable with frequently
used functions of the panel via the Programming Software. If a function key is active it is
marked with a green bar.
Alphanumeric keypad
Entry of letters, special characters, and numbers.
4.2 Status LEDs
18 status LEDs show information on the operating status of the fire panel.
Color* Meaning
R Fire alarm
R Evacuation ongoing
R Fire alarm transmission activated
R Fire protection equipment activated
Y Maintenance mode
Y Day mode/delays active

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000 In overview | en 15
Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877
Y General disabled
Y General fault
Y** Fire detector fault / disabled
Y** Signaling device fault / disabled
Y** Alarm transmission device fault / disabled
Y** Output to fire protection equipment fault / disabled
Y Power fault
G Power available
Y System/panel fault
G System in operation
R Programmable LED for a self-defined alarm
Y** Programmable LED for a self-defined fault/diasablement
*Y=yellow, R=red, G=green
**blinking: fault, steady: disabled
The LEDs for the status of devices like detectors , signaling devices , alarm
transmission devices and the outputs to fire protection equipment always light up in
combination with the general fault or general disabled icon according to their
status. Additionally, in case of a fault the LED of the respective element is blinking while the
LED indicating the general fault lights up steadily yellow.

16 en | In overview FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
2020-07 | 3.0 | F.01U.378.877 User Guide Bosch Sicherheitssysteme GmbH
Example:
1 2 3
1 Fault indication for a device
2 Device disabled
3 Device disabled and in fault status
Notice!
As neither the panel nor the power supply can have the status “disabled”, the system fault
and the power fault icon light up steadily in yellow in the status “fault”.
4.3 Touch screen
!
Caution!
Do not use any pointed or sharp objects (e.g. screw drivers, pens, etc.) when operating the
touch-sensitive display. The touchscreen may not be exposed to direct sunlight. Both can
seriously damage the touchscreen.

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000 In overview | en 17
Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877
Fire
2
Control
2
Fault
0
Bypass
0Status
Bypass
Block Diagnostics
Maintenance Configuration
Switch to day mode Further functions
Control
Monitoring Reset
* Level 3 logged in
1
2
3
4
5
DEF
21
ABC
3
4 5 6
GHI JKL MNO
7 8 9
PQRS TUV WXYZ
*0#
F1 F2 F3 6
1 Information bar 4 Fixed operation keys
2 Menu field 5 Alphanumeric keyboard
3 Status bar 6 Function keys, programmable
Information bar
The information bar displays general information as text or icons.
Icon Meaning
No connection established.
Only displayed on the panel.
No connection established.
Only displayed on the keypad.
Remote connection established.
Operator has restricted use of the remote panel: no control, only
monitoring.
Remote connection established.
Operator is in full control of the remote panel.
Remote connection established.
A remote operator is in full control of the panel.
The panel is locked for local access.
Ground fault detected.
Operator logged in.

18 en | In overview FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
2020-07 | 3.0 | F.01U.378.877 User Guide Bosch Sicherheitssysteme GmbH
Text Meaning
Panel 4-1 Logical node address
Level 3 logged in Access level of the operator who is logged in.
Possible levels: 2, 3 or 4
Only displayed in the main menu.
Bypass Block\Block\Detector Menu path of the selected menu
For reasons of space it is not always possible to display the
complete path.
Menu field
To select a main menu, touch the corresponding menu field on the touch screen. In All
functions at a glance, page 11 , there is an overview of all main menus with their respective
submenus.
Status bar
0
Fire
0
Control
8
Fault
0
Bypass Status
This status bar is available on each menu. In addition, other status bars are offered in some
menus; see also Switching between status bars, page 29 :
The leading number specifies the number of elements in the respective state:
Fire Number of groups that have triggered a fire alarm
Control Elements that are activated
Fault Elements that have reported a fault
Bypass Disabled elements
In addition it is possible to display an overview of the type and nature of all message types
received by the panel:
Status Display of a list of the various message and status types and the
number of elements in the respective state
To display the individual elements, touch the relevant field with your finger.
The Control and Fault status fields are identified by the letters "B" and/or "C":
– "B" means that controllers for type B fire protection equipment (G-B) are affected (e.g.
control elements without acknowledgement).
– "C" means that controllers for type C fire protection equipment (G-C) are affected (e.g.
extinguishing systems).
4.4 Standby screen
When the touchscreen is not operated, its backlight switches off after 5 minutes.
Notice!
In case of an active alarm or fault message, the backlight switches off after 60 minutes. The
display switches back to this message from any other element of the menu after 30 seconds.
If the screen is black, touch it gently to display the standby screen. The following information
is displayed on the standby screen:
– Date

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000 In overview | en 19
Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877
– Time
– Night mode
or
– Day mode
or
– Night/day combination
Depending on the configuration, additional information may be displayed.
In a networked fire detection system, further icons can be displayed in the standby display
depending on the network setting.
4.5 Display support information
To display the address of the company providing the support, please press the company logo
in the upper right corner of the panel screen.
DEF
21
ABC
3
4 5 6
GHI JKL MNO
7 8 9
PQRS TUV WXYZ
*0#
F1 F2 F3
,.-_
Notice!
Information concerning support is only displayed if the information has already been entered
in FSP‑5000‑RPS.

20 en | Operating principle FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
2020-07 | 3.0 | F.01U.378.877 User Guide Bosch Sicherheitssysteme GmbH
5 Operating principle
5.1 Switch on and switch off
Power button
The fire panel must be switched on and off with a power button which is located at the right
side of the panel. Also a reboot of the panel is done via the power button.
!
Warning!
Don’t unplug the panel for restarting it! Always use the power button. Unplugging the running
panel can cause a serious damage of the hardware and software.
The functions of the power button are:
– Press once shortly: Start the panel
– Press once shortly at a running panel: Shut down the panel
Notice!
A confirmation sound is played when the shutdown-sequence is starting. The shutdown is
completed when the “general fault” and the “system/panel fault” status LEDs light
up. Wait until the shutdown is completed before you interrupt the power.
Notice!
After having shut down the panel please interrupt the power supply. If a panel was shut down
but is not unplugged, after 10 seconds a warning tone will sound as a reminder.
– Press for 8 seconds: Interrupt the panel and reboot it (for example in case of a software
failure).
!
Warning!
You must only use this way of interrupting the panel if the system does not react anymore or
if you are asked to do so in case the panel ran into the safe state.
Safe state