Bosch Rexroth HD 2/H User manual

Assembly instructions
3 842 358 796/2015-01
Replaces: –
ENGLISH
HD 2/H
Lift-rotate unit
3 842 998 760
3 842 998 761
3 842 998 762
ENGLISH
358732_2015_01_EN.indd 1358732_2015_01_EN.indd 1 29.05.2015 08:32:3829.05.2015 08:32:38

2/56
Bosch Rexroth AG, MIT: HD 2/H, 3 842 358 796/2015-01
The data specified only serve to describe the product. The information provided in the instructions
on how to use the supplied product should only be considered application examples and
suggestions. Catalog information is not binding. The information given does not release the user
from the obligation of own judgment and verification. Our products are subject to a natural process
of wear and aging.
© This document, as well as the data, specifications and other information set forth in it, are the
exclusive property of Bosch Rexroth AG. It may not be reproduced or given to third parties without
its consent.
An example configuration is shown on the title page. The delivered product may thus vary from the
illustration.
The original assembly instructions were generated in German.
DE Die vorliegende Montageanleitung ist in den hier angebenen Sprachen verfügbar. Weitere Sprachen auf Anfrage.
Als gedruckte Version (print) oder als PDF-Datei (media) zum Download aus dem Medienverzeichnis:
www.boschrexroth.com/medienverzeichnis
Geben Sie in die Suchmaske (oben rechts, unter „Suche“) 3 842 358 732 ein, dann klicken Sie auf „Suche“.
EN These assembly instructions are available in the languages indicated here. Other languages on request.
They come in a hard copy (print) or a PDF file (media) that can be downloaded at:
www.boschrexroth.com/mediadirectory
Enter 3 842 358 796 in the search mask (at the top right, under “Search”), then click “Search”.
FR Les présentes instructions de montage sont disponibles dans les langues spécifiées ici. Autres langues sur demande.
En version imprimée (print) ou en version PDF (media) téléchargeable sur le répertoire multimédia :
www.boschrexroth.com/mediadirectory
Saisissez 3 842 358 797 (en haut à droite, sous « Search »), puis cliquez sur « Search ».
IT Le presenti istruzioni di montaggio sono disponibili nelle lingue seguenti. Altre lingue su richiesta.
Scaricabile come versione stampata (print) o come file PDF (media) dal Media Directory:
www.boschrexroth.com/mediadirectory
Digitare il codice 3 842 358 798 nel campo di ricerca “Search” (in alto a destra), quindi fare clic su “Search”.
ES Las presentes instrucciones de montaje están disponibles en los idiomas indicados. Hay más idiomas a petición.
Las instrucciones están disponibles como versión impresa (print) o como archivo PDF (media) para descargar del archivo de
medios: www.boschrexroth.com/mediadirectory
En el buscador (en la parte superior derecha, donde pone "Search") introduzca 3 842 358 799, a continuación haga clic en
"Search".
PT-
BR
Este manual de montagem está disponível nos idiomas especificados aqui. Outros idiomas mediante pedido.
Como versão impressa (impressão) ou como arquivo PDF (mídia) para download do índice de mídias:
www.boschrexroth.com/mediadirectory
Entre na máscara de pesquisa (canto superior direito, em «Search») 3 842 358 806 e clique em «Search».
ZH 本安装说明书有这里给出的语言版本。有印刷版本 (print) 或者电子版 PDF 文件 (media) 供使用，电子版文件可在下列的公司网站媒体网
页上下载: www.boschrexroth.com/mediadirectory
1. 在搜索窗口 (右上角，“Search”窗口) 内输入编号 3 842 358 807。2. 点击“Search”。
CS Tento návod k montáži je k dispozici ve zde uvedených jazycích. Jako tištěná verze (print) nebo jako soubor PDF (media) je ke
stažení z adresáře médií: www.boschrexroth.com/mediadirectory
1. Zadejte do vyhledávací obrazovky (nahoře vpravo, pod „Search“) MTCS 358 732. 2. Klikněte na „Search“.
PL Dana instrukcja montażu jest dostpna w podanych tutaj językach. W postaci wydrukowanej lub w wersji pdf (media) do
pobrania ze strony: www.boschrexroth.com/mediadirectory
1. Do wyszukiwarki wpisać (w prawym górnym rogu „Search“) MTPL 358 732 . 2. KKliknać „Search“
3 842 358 732 print media LG 2/H Hub-Dreheinheit DE Deutsch
3 842 358 796 print media LG 2/H Lift-rotate unit EN English
3 842 358 797 print media LG 2/H Unité de levage et de rotation FR Français
3 842 358 798 print media LG 2/H Unità di sollevamento e rotazione IT Italiano
3 842 358 799 print media LG 2/H Unidad de tornado y elevación ES Español
3 842 358 806 print media LG 2/H Unidade de rotação e elevação PT Português
3 842 358 807 print media HD 2/H 升降旋转装置 ZH 中文
MTCS 358 732 media HD 2/H Zvedací otočná jednotka CS Česky
MTPL 358 732 media HD 2/H Jednostka podnośnikowo-obrotowa PL Polski
358732_2015_01_EN.indd 2358732_2015_01_EN.indd 2 29.05.2015 08:32:5029.05.2015 08:32:50

3 842 358 796/2015-01, MIT: HD 2/H, Bosch Rexroth AG
3/56Contents
1 About this documentation 5
1.1 Validity of the documentation 5
1.2 Required and supplementary documentation 5
1.3 Presentation of information 5
1.3.1 Safety instructions 5
1.3.2 Symbols 6
1.3.3 Designations 7
2 Safety instructions 7
2.1 About this chapter 7
2.2 Intended use 7
2.3 Improper use 7
2.4 Personnel qualifications 8
2.5 General safety instructions 8
2.6 Product-specific safety instructions 9
2.7 Personal protective equipment 10
2.8 Responsibilities of the end user 10
3 General information regarding damage to property and the product 10
4 Delivery contents 11
4.1 Delivery state 11
5 About this product 11
5.1 Performance description 11
5.1.1 Lift rotate unit HD 2/H use 11
5.1.2 Lift rotate unit HD 2/H design 11
5.2 Product description 12
5.3 Identification of the product 16
6 Transportation and storage 16
6.1 Transporting the product 16
6.2 Storing the product 16
7 Installation 17
7.1 Unpacking the product 17
7.2 Installation conditions 17
7.2.1 Installation position 17
7.2.2 Fixing with T-head bolts 17
7.3 Required tools 17
7.4 Symbols used 18
7.5 Installing the product 19
7.5.1 Install lift rotate unit HD 2/H size 1 in section ST 2 19
7.5.2 Install lift rotate unit HD 2/H size 2 and size 3 in section ST 2 21
7.5.3 Install the additional supports 23
7.5.4 Install position query for vertical lift and horizontal rotation 24
7.5.5 Install parts for WT 2 control (size 1/size 2) 25
7.5.6 Install parts for WT 2 control (size 3) 26
7.5.7 Install protective case set (example size 2 180°) 27
7.5.8 Make the pneumatic connection to the product 31
Contents
ENGLISH
358732_2015_01_EN.indd 3358732_2015_01_EN.indd 3 29.05.2015 08:32:5029.05.2015 08:32:50

4/56
Bosch Rexroth AG, MIT: HD 2/H, 3 842 358 796/2015-01
8 Starting up 34
8.1 First-time operation 34
8.2 Further risks 36
8.3 Re-commissioning after a standstill period 37
8.4 Check and adjust the rotation angle of the lift rotate unit 37
8.5 Adjust stroke, lift and rotate speed 38
8.6 Reduce stroke over conveyor level 39
8.7 Example for guard to be provided by the customer 40
9 Operation 41
9.1 Notices regarding operation 41
9.1.1 Wear 41
9.1.2 Measures to minimize wear 41
9.1.3 Loading the workpiece carrier 41
9.1.4 Permitted center of gravity on the workpiece carrier 42
9.1.5 Environmental influences 42
10 Maintenance and repair 44
10.1 Cleaning and care 44
10.2 Inspection 45
10.3 Maintenance 46
10.4 Replacement of worn parts 47
10.4.1 Replace the pressure point of the fingers in the rotary table
(only sizes 1 and 2). 47
10.4.2 Replace damper for rotary table 48
10.4.3 Spare parts 49
11 Decommissioning 49
12 Disassembly and replacement 49
12.1 Preparing the product for storage/re-use 49
13 Disposal 50
14 Extension and modification 50
15 Troubleshooting 50
16 Technical data 51
16.1 Mass moment of inertia 51
16.2 Ambient conditions 54
16.3 Pneumatics 54
358732_2015_01_EN.indd 4358732_2015_01_EN.indd 4 29.05.2015 08:32:5029.05.2015 08:32:50

About this documentation 5/56
3 842 358 796/2015-01, MIT: HD 2/H, Bosch Rexroth AG
1 About this documentation
1.1 Validity of the documentation
This documentation applies to the following products:
• 3 842 998 760, Lift-rotate unit HD 2/H size 1
• 3 842 998 761, Lift-rotate unit HD 2/H size 2
• 3 842 998 762, Lift-rotate unit HD 2/H size 3
This manual is intended for engineers, operators, service engineers and system end
users.
This document contains important information to install, transport, commission,
operate, use, maintain, and dismantle the product safely and correctly and on simple
troubleshooting.
Read this manual completely, especially chapter 2 “Safety” and Chapter 3,
“General notes for property damage and product damage” before working with
the product.
1.2 Required and supplementary documentation
Only operate when you are in possession of the documentation marked with the
book symbol and you have understood and observed this.
Table 1: Required and supplementary documentation
Title Document number Document type
Safety-related information for staff 3 842 527 147
MTparts 3 842 529 770 Spare part list available
on CD
1.3 Presentation of information
In order for you to work with your product quickly and safely using this
documentation, safety symbols, terms and abbreviations are used in a uniform
manner. These are explained in the following sections to help you understand them
better.
1.3.1 Safety instructions
In this documentation, safety instructions are given in chapter 2.6 “Specific product
precautions” and Chapter 3 “General notes on property and product damage”, and
before a course of action or a required action, in which there is a risk of personal
injury or property damage. The measures described to avoid these hazards must be
observed.
ENGLISH
358732_2015_01_EN.indd 5358732_2015_01_EN.indd 5 29.05.2015 08:32:5029.05.2015 08:32:50

6/56 About this documentation
Bosch Rexroth AG, MIT: HD 2/H, 3 842 358 796/2015-01
Safety instructions are structured as follows:
SIGNAL WORD
Type and source of danger!
Consequences resulting from non-compliance
Measures to prevent hazards
…
•Warning sign: draws attention to the danger
•Signal word: indicates the severity of the danger
•Type and source of danger: indicates the type and source of the danger
•Consequences: describes the consequences resulting from non-compliance
•Precaution: explains how to avoid the hazard
Table 2: Risk classes according to ANSI Z535.6-2006
Warning sign, signal word Meaning
DANGER Indicates a hazardous situation which will result in death or
serious injury if not avoided.
WARNING Indicates a hazardous situation which can result in death or
serious injury if not avoided.
CAUTION Indicates a hazardous situation which can result in minor or
moderate injury if not avoided.
NOTICE Damage to property: The product or the surrounding
environment can be damaged.
1.3.2 Symbols
The following icons indicate information which is not relevant to safety, however, it
makes the documentation easier to comprehend.
Table 3: Meaning of the icons
Icon Meaning
If this information is not observed, the product can not be optimally used
or operated.
Single, non-related actions
1.
2.
3.
Numbered instructions
The numerals indicate that the actions are in chronological order.
358732_2015_01_EN.indd 6358732_2015_01_EN.indd 6 29.05.2015 08:32:5029.05.2015 08:32:50

Safety instructions 7/56
3 842 358 796/2015-01, MIT: HD 2/H, Bosch Rexroth AG
1.3.3 Designations
In this documentation, the following designations are used:
Table 4: Designations
Designation Meaning
HD 2/H Lift-rotate unit from the Rexroth transfer system TS 2plus
WT 2 Workpiece carrier from the Rexroth transfer system TS 2plus
BG Size
2 Safety instructions
2.1 About this chapter
The product was manufactured in accordance with generally accepted engineering
standards. Nevertheless, there is a risk of personal injury and property damage if you
do not observe this chapter and the safety instructions in this document.
Read this manual thoroughly and completely before you start working with the
product.
Keep the documentation accessible to all users at all times.
When passing on the product to a third party, make sure that it is always
accompanied by the necessary documentation.
2.2 Intended use
The product is an incomplete machine.
You may use the product as follows:
• for installation in a Rexroth transfer system TS 2plus
• For lifting and rotating Rexroth-workpiece carriers WT 2 from the conveyor
section.
• Maximum load / line load: See technical data on page 51.
• For the environmental conditions see page 54.
The product is strictly intended for professional use and not for private use.
The intended use also implies that you have read and understood this
documentation, especially chapter 2 “Safety”.
2.3 Improper use
Any other use than that which is described as the intended use is improper and not
permitted.
Bosch Rexroth AG is not liable for damage resulting from improper use. The risks
associated with improper use lie solely with the user.
The following also fall under the category of improper use:
• Transporting other transport materials than those which are specified.
• The use of the product without protective case or other protective guard on the
premises.
• Operating the product in accumulation mode.
ENGLISH
358732_2015_01_EN.indd 7358732_2015_01_EN.indd 7 29.05.2015 08:32:5029.05.2015 08:32:50

8/56 Safety instructions
Bosch Rexroth AG, MIT: HD 2/H, 3 842 358 796/2015-01
• The transport of persons on the product or the cargo.
• Persons climbing onto the product
– the product is not accessible.
• Private use.
2.4 Personnel qualifications
The activities described in this documentation require basic knowledge of
mechanical, electrical and pneumatic systems, as well as knowledge of the
appropriate technical terms. Additional knowledge in dealing with a hoist and the
associated slings are required for transport and handling of the product. In order to
ensure safe use, these activities may only be carried out by authorized personnel or
an instructed person under the supervision of a qualified person.
An expert is someone who can evaluate the work assigned to them due to their
professional training, knowledge and experience as well as knowledge of the relevant
provisions, recognize potential hazards and take appropriate safety measures.
Qualified personnel must comply with the relevant technical regulations and have the
necessary expertise.
Bosch Rexroth offers training to support activities in specific areas. You can find an
overview of the training content online at http://www.boschrexroth.de/didactic.
2.5 General safety instructions
• Observe the current regulations for accident prevention and environmental
protection.
• Observe the safety rules and regulations of the country in which the product is
used / applied.
• Only use Rexroth products which are in technically perfect condition.
• Follow all instructions printed on the product.
• Persons who install, operate, disassemble or service Rexroth products may
not be under the influence of alcohol, drugs or medications that affect their
responsiveness.
• Use only original accessories and spare parts from Rexroth to prevent hazards to
persons due to improper spare parts.
• Observe the ambient conditions specified in the product documentation and
technical data.
• You may operate the product only when it was found that the final product (such as
a machine or system), in which the Rexroth products are installed, is in accordance
with the respective national provisions, safety regulations and the standards for the
application.
358732_2015_01_EN.indd 8358732_2015_01_EN.indd 8 29.05.2015 08:32:5029.05.2015 08:32:50

Safety instructions 9/56
3 842 358 796/2015-01, MIT: HD 2/H, Bosch Rexroth AG
2.6 Product-specific safety instructions
• You must not alter the product design principle or reconstruct it.
• Do not put the product unduly under mechanical strain under any circumstances.
Never use the product as a handle or step. Do not place objects on it.
• The product must always be prevented from tipping over.
• Pay attention to the transport instructions on the packaging.
• Inspect the product for visible transport damage.
• Lay the cables and wires so that they are not damaged and no one can trip over
them.
• Always switch the relevant system component to a pressure-free and tension-free
state before installing the product or connecting or disconnecting plugs.
• Secure the component against reconnection.
• Before beginning, make sure that all gaskets and seals of the connectors are
installed properly and are not damaged to prevent fluids and debris from entering
the product.
• Allow the product to acclimatize for a few hours prior to first-time operation,
otherwise condensation can form inside the housing.
• Make sure that all the electrical and pneumatic connections are assigned or closed.
• Check the security requirements according to DIN EN 619.
• Only start up a fully assembled product.
• Make sure that all pertinent product safety devices are on hand, properly installed
and fully functional. You must not change the position of, circumvent or disable
safety devices.
• Do not touch any moving parts.
• Inspect the product for malfunctioning.
• Make sure that only authorized personnel
– start, operate or modify the functional sequence in the context of the intended
use of the product
– or make adjustments to components or parts.
• Only allow persons authorized by the operator access to the direct operating zone
of the system. This also applies to periods when the product is not in operation.
• Make sure that:
– the access to EMERGENCY STOP devices is free from obstructions,
– all feeding points, workplaces and passageways are kept clear.
• Do not use the EMERGENCY STOP devices for normal stopping action.
• Regularly check the correct operation of the EMERGENCY STOP devices.
• In the event of an error or other irregularities, after an EMERGENCY STOP turn the
product off and secure it against restarting.
• Do not touch any moving parts.
• A resting system is not a safe system because stored energy can be released
unintentionally or due to improper maintenance work.
• Start the system again after an EMERGENCY STOP or malfunctioning only after you
have identified the cause of and have eliminated the fault.
General
During transport
During installation
During startup
While running
EMERGENCY STOP, fault
ENGLISH
358732_2015_01_EN.indd 9358732_2015_01_EN.indd 9 29.05.2015 08:32:5029.05.2015 08:32:50

10/56 General information regarding damage to property and the product
Bosch Rexroth AG, MIT: HD 2/H, 3 842 358 796/2015-01
• Make sure that the access to maintenance and inspection points are free of
obstacles.
• Perform the prescribed maintenance work at the intervals prescribed in
chapter 10.3 Maintenance.
• Make sure that no lines, connections and components are loose while the system is
under pressure and tension. Secure the system against restarting.
• Dispose of the product in accordance with the national laws of your country.
2.7 Personal protective equipment
• Appropriate protective clothing is to be worn when handling the product
(e.g. safety shoes, close-fitting clothing, a hair net for long, loose hair).
As an operator or end user, you are responsible for wearing appropriate protective
equipment when handling the product.
All parts of your personal protective equipment must be intact.
2.8 Responsibilities of the end user
• Before first use or re-commissioning of a conveyor system, run a risk assessment in
accordance with DIN EN ISO 12100.
• Please also refer to the further risks of the individual components (see chapter 8.2
“Further risks” on page 36).
• Before initial commissioning ensure that there are no protruding or sharp-edged
parts that may endanger personnel working or moving in the area.
• Provide safety-related instructions to the operating personnel before first use or
re-commissioning, and then in regular intervals.
3 General information regarding damage to
property and the product
The warranty only applies to the delivered configuration.
• The warranty is void in case of faulty installation, commissioning and operation, as
well as improper use and / or improper handling.
• Avoid the penetration of detergent into the system.
• Never use solvents or aggressive cleaning agents.
• When cleaning, do not use high-pressure washers.
During maintenance
and repair
During disposal
While cleaning
358732_2015_01_EN.indd 10358732_2015_01_EN.indd 10 29.05.2015 08:32:5029.05.2015 08:32:50

Delivery contents 11/56
3 842 358 796/2015-01, MIT: HD 2/H, Bosch Rexroth AG
4 Delivery contents
The following is included in the delivery:
• 1 lift rotate unit HD 2/H
• Mounting material
• Pneumatic elements such as screw fittings, throttle check valves, etc
• 1 assembly instructions “HD 2/H, lift rotate unit”
The protective case kit is not part of the delivery and must be ordered separately.
4.1 Delivery state
• Lift rotate unit HD 2/H manufacturer-assembled.
5 About this product
5.1 Performance description
Fig. 1:
>45mm
>52mm
358 732-01
bL
Lift rotate unit HD 2/H performance description
5.1.1 Lift rotate unit HD 2/H use
• Installation in conveyor belt BS 2… or conveyor section ST 2...
• Lifting and rotating (90° / 180°) workpiece carriers WT2 from the conveyor section
(> 45 mm via conveyor level, see Fig. 1, detail X).
5.1.2 Lift rotate unit HD 2/H design
• Extremely compact construction Suitable for limited installation space.
• Pneumatic drive
Please note:
• Only 180° horizontal
rotation for non-square
workpiece carriers.
• With sizes 1 and 2, angle
of rotation 90°, the
reverse rotation of the
rotary table is performed
below the belt section.
• With size 3, angle of
rotation 90°, the reverse
rotation of the rotary table
is performed above the
belt section.
ENGLISH
358732_2015_01_EN.indd 11358732_2015_01_EN.indd 11 29.05.2015 08:32:5029.05.2015 08:32:50

12/56 About this product
Bosch Rexroth AG, MIT: HD 2/H, 3 842 358 796/2015-01
5.2 Product description
Fig. 2:
A1
I
D
358 732-02a
b
l
T
G
H
E
F
A
Lift rotate unit HD 2/H size 1
Please note:
• Only 180° horizontal
rotation for non-square
workpiece carriers.
• With sizes 1 and 2, angle
of rotation 90°, the
reverse rotation of the
rotary table is performed
below the belt section.
A: Lift rotate unit
HD 2/H size 1
For possible
workpiece carrier
sizes see Page 15.
A1: Protective case kit
(not included in the
delivery)
D: Rotary table
E: Lifting plate
F: Base plate
GThreaded hole
position query
rotation position
HDamper
IMounting frame
*)
w = Width in conveyor direction
lT= Length in conveyor direction
358732_2015_01_EN.indd 12358732_2015_01_EN.indd 12 29.05.2015 08:32:5129.05.2015 08:32:51

About this product 13/56
3 842 358 796/2015-01, MIT: HD 2/H, Bosch Rexroth AG
Fig. 3:
E
H
F
G
l
T
358 732-02b
b
B
B1
I
J
D
Lift rotate unit HD 2/H size 2
Please note:
• Only 180° horizontal
rotation for non-square
workpiece carriers.
• With sizes 1 and 2, angle
of rotation 90°, the
reverse rotation of the
rotary table is performed
below the belt section.
B: Lift rotate unit
HD 2/H size 2
For possible
workpiece carrier
sizes see Page 15.
B1: Protective case kit
(not included in the
delivery)
D: Rotary table
E: Lifting plate
F: Base plate
GThreaded hole
position query
rotation position
HDamper
IMounting frame
JAdditional support
with loads of > 50 kg
(not included in the
delivery)
*)
w = Width in conveyor direction
lT= Length in conveyor direction
ENGLISH
358732_2015_01_EN.indd 13358732_2015_01_EN.indd 13 29.05.2015 08:32:5129.05.2015 08:32:51

14/56 About this product
Bosch Rexroth AG, MIT: HD 2/H, 3 842 358 796/2015-01
Fig. 4:
J
D
E
F
H
C1
I
b
l
T
358 732-02c
G
C
Lift rotate unit HD 2/H size 3
Please note:
• Only 180° horizontal
rotation for non-square
workpiece carriers.
• With size 3, angle of
rotation 90°, the reverse
rotation of the rotary table
is performed above the
belt section.
C: Lift rotate unit
HD 2/H size 3
For possible
workpiece carrier
sizes see Page 15.
C1: Protective case kit
(not included in the
delivery)
D: Rotary table
E: Lifting plate
F: Base plate
GThreaded hole
position query
rotation position
HDamper
IMounting frame
JAdditional support is
absolutely necessary.
*)
w = Width in conveyor direction
lT= Length in conveyor direction
358732_2015_01_EN.indd 14358732_2015_01_EN.indd 14 29.05.2015 08:32:5129.05.2015 08:32:51

About this product 15/56
3 842 358 796/2015-01, MIT: HD 2/H, Bosch Rexroth AG
Table 5: Possible workpiece carrier sizes for size …
Size
HD 2/H
Applicable work-
piece carrier
Width in conveyor
direction
w [mm]
Length in conveyor
direction
lt[mm]
Size 1
3 842 998 760
Load up to 50 kg *
b
l
T
WT 2
WT 2/F
240
240
320
400
320
240
320
400
480
400 320
Size 2
3 842 998 761
l
T
b
Load up to 128 kg *
Additional support with loads of > 50 kg (not included in delivery).
WT 2
WT 2/F
400 400
480
480
400
480
640
800
640
480
640
800
1040
800 640
Size 3
3 842 998 762
b
l
T
Load up to 240 kg *
Additional support is absolutely necessary.
WT 2/H
WT 2/F-H
800 800
1040
1040
800
1040
1200
1200 1200
*The maximum conveyor belt line load is to be observed (see chapter 16 “Technical data” on page 51)
ENGLISH
358732_2015_01_EN.indd 15358732_2015_01_EN.indd 15 29.05.2015 08:32:5229.05.2015 08:32:52

16/56 Transportation and storage
Bosch Rexroth AG, MIT: HD 2/H, 3 842 358 796/2015-01
5.3 Identification of the product
Fig. 5: Name plate
6 Transportation and storage
• Pay attention to the transport instructions on the packaging.
• Shipping weight: see delivery documents.
• The product must always be prevented from tipping over!
• The ambient conditions must be controlled when storing and transporting;
see page 54.
6.1 Transporting the product
WARNING
Raised loads can fall down!
Serious injury (or death) can occur if the product falls down.
Use only slings with sufficiently high load capacity (for product weight see
shipping documents).
Check if the carrying straps are attached properly before lifting the product!
The product must always be prevented from tipping over when lifting!
During raising and lowering pay attention that nobody other than the operator is
in the danger zone!
6.2 Storing the product
• Only set the product down onto a level surface.
• Protect the product from mechanical influences.
• Protect the product from environmental influences such as dirt and moisture.
• Pay attention to the ambient conditions, see page 54.
• Support the product so that hanging-mounted engines/actuators/cylinders will not
be burdened.
B
Typschild
....... ..........
.........
.................
........
A
C
A: Part number
Order number
B: Designation
C: Design and dimensions
358732_2015_01_EN.indd 16358732_2015_01_EN.indd 16 29.05.2015 08:32:5229.05.2015 08:32:52

Installation 17/56
3 842 358 796/2015-01, MIT: HD 2/H, Bosch Rexroth AG
7 Installation
7.1 Unpacking the product
Lift the product from its packaging.
Use a lifting aid to lift the product. For example, the eye bolts (X) in the base
plate serve as lifting points for a round sling (see e.g. Fig. 6 on page 19)
Dispose of the packaging material in accordance with the national laws of your
country.
7.2 Installation conditions
During installation the ambient conditions specified in the technical data
(see page 54) must be maintained.
7.2.1 Installation position
Install the product at right angles and parallel to the axis. This ensures proper
functioning and prevents premature wear and tear.
7.2.2 Fixing with T-head bolts
• Mount the transfer systems TS 1, TS 2plus, TS 2pv, TS 4plus, TS 5 and the chain
conveyor systems VarioFlow and VarioFlow S with T-head bolt and collar nut.
• When inserting and tightening, make sure the T-head is in the correct position
in the collar nut. The notch at the end of the screw indicates the position of the
T-head.
1 = insertion position of the T-head bolt into the slot
2 = clamping position of the T-head bolt into the nut
Tightening torque 25 Nm (M8).
7.3 Required tools
• Hex head cap screw SW14
• Hex socket head cap screw SW3, SW4, SW5, SW6.
• Cross recess screwdriver PZ2
• Rubber mallet
• Spirit level
21
ENGLISH
358732_2015_01_EN.indd 17358732_2015_01_EN.indd 17 29.05.2015 08:32:5229.05.2015 08:32:52

18/56 Installation
Bosch Rexroth AG, MIT: HD 2/H, 3 842 358 796/2015-01
7.4 Symbols used
Table 6: Symbols used
21 Connection with T-head bolt and collar nut.
When inserting and tightening, make sure the T-head is in the correct position
in the collar nut. The notch at the end of the screw indicates the position of the
T-head.
1 = insertion position of the T-head bolt into the nut
2 = clamping position of the T-head bolt into the nut
Tightening torque 25 Nm
SW13
MD = 20Nm
Hex key
SW = screw width ... mm
MD= necessary tightening torque … Nm
SW5
MD = 8Nm
Hex socket head cap screw key
SW = screw width ... mm
MD= necessary tightening torque … Nm
PH3
PZ2
Screwdrivers for cross-head screws
PZ … = Pozidriv screwdriver, size …
PZ … = Phillips screwdriver, size …
ISO-FLEX
TOPAS
NCA 52
Klüber
Struktovis
GHD
Lubricate / Lubricate with specific grease:
• ISO-FLEX TOPAS NCA 52: www.klueber.com
• Klüber Struktovis GHD: www.klueber.com
Loctite 243 Loctite 601
Secure the screws with:
• Loctite 243: medium strength (detachable), www.loctite.de
• Loctite 601: high-strength screw retention (non-detachable), www.loctite.de
The marked parts are not required for the assembly described. Dispose of the
parts or use them for other purposes.
213
Graphical depiction of assembly sequence.
The numbers correspond to the sequence of assembly, in accordance with the
instructions of the accompanying text.
AB C X Graphical depiction of components.
The letters denote the components mentioned in the accompanying text.
Detail view from a different direction, for example, on the back or bottom of the
product.
358732_2015_01_EN.indd 18358732_2015_01_EN.indd 18 29.05.2015 08:32:5329.05.2015 08:32:53

Installation 19/56
3 842 358 796/2015-01, MIT: HD 2/H, Bosch Rexroth AG
7.5 Installing the product
NOTICE
Incomplete or incorrect installation can lead to property damage
The product can be damaged; the service life may be adversely affected.
With size 3 ensure that the additional supports are installed (mandatory).
7.5.1 Install lift rotate unit HD 2/H size 1 in section ST 2
Fig. 6:
358 732-28
4
3
2X
==
1
X
5
SW13
Install lift rotate unit HD 2/H size 1 in section ST 2 (example shown here size 1 180°)
Please note:
Because of its low weight,
size 1 can be installed
into the section profile
directly from below without
dismantling.
1. Mark the installation
position of HD 2/H.
2. Install the T-head bolts.
3. Install the lift rotate unit
HD 2/H to the section
profile from below
Please note:
Use a lifting aid to lift the
product. For example, the
eye bolts (X) in the base
plate serve as lifting points
for a round sling (see Fig. 6)
4. Insert the T-bolts into
the section profile.
5. Hand tighten the collar
nuts
ENGLISH
358732_2015_01_EN.indd 19358732_2015_01_EN.indd 19 29.05.2015 08:32:5329.05.2015 08:32:53

20/56 Installation
Bosch Rexroth AG, MIT: HD 2/H, 3 842 358 796/2015-01
Fig. 7:
358 732-29
6
7
F
8
SW13
MD = 25Nm
=
=
=
8
=
Adjust lift rotate unit HD 2/H size 1 in section ST 2 (example shown here size 1 180°)
6. Adjust the position of
the base plate between
the conveyor sections.
7. Tighten down the collar
nuts.
8. Remove the eye bolts
Please note:
Optionally, size 1 can be
installed as described in
chapter 1.1.9 on page 21.
NOTICE
Improper adjustment can
result in property damage
The product can be
damaged; the service life
may be adversely affected.
During commissioning
the angle of rotation
must be checked
and precisely set Not
performing this work
may result in the
lift rotate unit being
damaged or cause
premature wear. See
chapter 8.4 “Check
and adjust the rotation
angle of the lift rotate
unit” on page 37.
358732_2015_01_EN.indd 20358732_2015_01_EN.indd 20 29.05.2015 08:32:5329.05.2015 08:32:53