Bosch LTC 2682/90 Series User manual

CCTV | LTC 2682/90 Series System4 Video Management System
System4 Video Management Systems incorporate advanced
circuitry and expanded memory with improved color
sampling and processing to produce high quality, true-to-
life color video images. Enhanced circuitries allow
increased image accuracy and faster display rates without
annoying onscreen flickering (aliasing) common with
multiscreen displays. These units can be used as matrix
switchers, displaying any camera to either monitor A or B
and include custom alarm display on monitor A with up to
4 pre-position call-ups in a single alarm contact. Also, with
the internal universal power supply, the System4
intelligently detects the video input signal input voltage and
automatically sets the unit for PAL/NTSC or EIA/CCIR.
Functions
The advanced features of System4 are accessible through
the optional IntuiKey remote keyboard. The IntuiKey
keyboard is capable of controlling Bosch AutoDome
systems and receiver/drivers for pan/tilt/zoom control. The
System4 remote keyboards control all primary functions of
any selected Bosch VCR. Up to 30 System4 units and 30
VCRs can be programmed and controlled by one keyboard.
With Master Clock Synchronization, the System4
automatically synchronizes all of the clocks. With a
keyboard port expander unit (see OPTIONS), up to four
keyboards can be used to program and control a System4
video controller.
The LTC 2682/90 16-channel Triplex multiplexer allows for
the following:
•Simultaneous recording and multiscreen viewing on
both monitors.
•Simultaneous recording and playback and live viewing
multiscreen.
•Can play back the recording formats of 6 different
manufacturers.
The system's user-friendly controls allow fast and easy
programming and operation. System4 units include an
onscreen menu for programming which is available in
English, French, German, Spanish, Dutch, or Italian.
Programming allows for either AutoSet or customized
system configuration via the Advanced Setup program. Help
screens provide explanation and instruction, guiding
operators step-by-step through the setup process. When
the AutoSet feature is enabled, System4 will automatically
configure itself for recording, sequencing, and video loss
listing based on the number of connected cameras.
All System4 models provide digital motion detection,
ensuring that cameras with motion present become the
priority for recording. Recording may be programmed as
either "exclusive" or “interleave", based on motion or alarm
detection. Four levels of sensitivity are available including
direction sensing, target size, and a special walk-through
LTC 2682/90 Series System4 Video
Management System
▶True Triplex operation
▶Simultaneous playback and live view multiscreen
display
▶Playback six (6) recording formats
▶Timed events feature
▶Log events feature
▶Custom alarm display with multiple presets
▶Full duplex VCR controls with on-line status and time/
date/search functions
▶Remote VCR setup
▶Master clock synchronization
www.boschsecurity.com

2 | LTC 2682/90 Series System4 Video Management System
setup to eliminate false alarms. A selectable audible buzzer
is available in this mode. Parameter setup can be
preprogrammed using the Timed Events feature, which
allows several configurations for system operation and
recording. Up to six separate System4 operational
parameters may be programmed and stored in the system
memory for manual call-up or time activation.
System4 units include front panel controls, synchronization
with VCR head switching, freeze, 4X zoom, video loss
indicators, alarm capture, password security, multi-relay
outputs, and full function time/date with 16-character
titling record capability. All units are compatible with
standard VHS and SVHS formats and normal and high
density VCRs. No external synchronization of camera inputs
is required, as integrated time based correction is included
in all models.
A Log Events feature tracks event history and a console port
allows PC control of the system, full duplex VCR control
including remote VCR setup and a time/date/search
function to reduce tape viewing time, or interaction with
Access Control Systems and Bosch LTC 2650/00 Graphical
User Interface (GUI) software packages.
Today's growing business demands security that is
sophisticated, reliable and easy to use. From discount
stores to commercial offices, System4 intelligently provides
a multifunction system capable of handling up to 9 or 16
camera inputs with switching and multiplexer control, pan/
tilt/zoom, and VCR control in one compact unit.
Certifications and Approvals
Electromagnetic Compatibility
(EMC)
CE Immunity, CE Emission Class A,
FCC Class A
Safety CE, UL, cUL

LTC 2682/90 Series System4 Video Management System | 3
Installation/Configuration Notes
System4 Triplex, Typical Operation
1 Data
2 Video
3 Terminated Resistor
4 VEXT Connection 21 to 11 and 25 to 15 (GND)
5 S1383
6 S-VHS Type VCR
7 S-VHS Video
www.boschsecurity.com

4 | LTC 2682/90 Series System4 Video Management System
System4, Typical Configuration
1AutoDome
2 Video
3 Record/Playback VCR
4 Data
5 Out
6 In
7 Up to 16 Cameras
8 Recording VCR
9 PIR Sensor
Simultaneous Recording to Two VCR’s (Triplex
Operation)
The LTC 2682 provides two independent VCR outputs; each
output can be programmed to encode camera sequences.
Using the LTC 2682 in this mode offers the flexibility to
distribute the number of cameras between two VCRs to
provide a fast update rate for each camera. Two VCRs may
also be programmed so that one VCR may be used for
normal encoding while the other is used for action/alarm
encoding. In this triplex mode of operating, Monitor A
always displays the image in multi-screen, quad, full, or
multiple cameras in a sequence mode.
Technical Specifications
Electrical
Description Voltage Range Power/ Current
16-channel Triplex 108 to 253 VAC,
50/60 Hz
30 W/0.5 A
Synchronization
Full Time-based Correction
Monochrome 625 line, 50 Hz, CCIR
Monochrome 525 line, 60 Hz, EIA RS-170
Color 625 line, 50 Hz, PAL
Color 525 line, 60 Hz, NTSC
Digital Memory
720 H x 576 V
AGC: Automatic or manual adjustment for each video input. Video Input
Level: 0.5 Vp-p to 2.0 Vp-p composite video signal.
Operating Modes
Simultaneous record and multi-screen viewing on both monitors. Simulta-
neous record and playback and multi-screen viewing.
Display Modes
Live
Monitor A Full, quad, or multi-screen display

LTC 2682/90 Series System4 Video Management System | 5
Description Voltage Range Power/ Current
Monitor B Full (alarm or action call-up only), quad, or multi-
screen display
Playback
Monitor A Full, quad, or multi-screen display
Monitor B Full
Controls and Indicators - Front panel
Inputs
Camera 9 (16) inputs; 18 (32) BNC connectors, automatic
looping termination BNC
VCR IN One (1) BNC
VCR IN One (1) Y/C
Outputs
Monitor A One (1) BNC
Monitor B One (1) BNC
VCR OUT One (1) BNC
Monitor A One (1) Y/C
Monitor B One (1) Y/C
VCR OUT One (1) Y/C
Connectors
Power IEC socket, 3-wire power cord with grounded plug;
1.8 m (6 ft)
Accessory Inputs/
Outputs
One (1), 25-pin D-type connector for alarms and ac-
cessories
Alarm Inputs 9 (16) individually selectable NO or NC alarm
Inputs
Relay Output Three (3) relay outputs
(selectable NO or NC),
one (1) for action/alarm (VCR # 1),
one (1) for action/alarm (VCR # 2) and
one (1) for video loss (these relay contacts handle up
to 1 A at 40 VAC/VDC)
SDA 15-pin D type for 5 Bi-Phase outputs
Console 9-pin D type for RS-232 controls
VEXT inputs Two (2)
Mechanical
Construction Steel chassis with sheet metal cover and plastic bezel
Finish Charcoal case
Dimensions
(W x H x D)
440 x 305 x 40 mm (17.3 x 12 x 1.7 in.)
Weight 5 kg (11 lb)
Rack Mount Kit
(Included)
For mounting one unit in an EIA 48 cm (19 in.) rack
Environmental
Operating Temper-
ature
10°C to 55°C (50°F to 131°F)
Storage Tempera-
ture
–20°C to 60°C (–4°F to 140°F)
Humidity 0% to 90% relative, non-condensing
Ordering Information
LTC 2682/90 Video Management System
16 channel multiplexer, color and B&W, tri-
plex, 105–253 VAC, 50/60 Hz
LTC 2682/90
Accessories
KBD‑Universal Keyboard
IntuiKey Universal Keyboard for use with LCD
Displays for Allegiant, Divar and System4 Mul-
tiplexers
KBD-UNIVERSAL
KBD‑Digital Keyboard
IntuiKey Digital Keyboard for use with Divar
Digital Video Recorders and System4 Multi-
plexers
KBD-DIGITAL
LTC 2604/50 Keyboard Port Expander Unit
System4, 230 V, 50 Hz
LTC 2604/50
LTC 2604/60 Keyboard Port Expander Unit
System4, 120 V, 60 Hz
LTC 2604/60
LTC 2609/00 System4 Extension Kit
links up to six (6) System4 Multiplexers, 90
units
LTC 2609/00
LTC 2650/00 Graphical User Interface
(GUI)
Graphical User Interface for programming and
controlling
LTC 2650/00
LTC 2605/91 System4 Video Manager
for use with Divar and System 4 Multiplexers,
105–253 VAC, 50/60 Hz
LTC 2605/91
S1386 VCR Control Cable
for Philips LTC multiplexers and VCRs
S1386
S1383 VCR Control Cable
VCR control cable for mux to VCR
S1383
LTC 8558/00 Keyboard Cable
optional, 30.5 m (100 feet)
LTC 8558/00
www.boschsecurity.com

6 | LTC 2682/90 Series System4 Video Management System
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[email protected]
www.boschsecurity.com
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.us
Asia-Pacific:
Bosch Security Systems Pte Ltd
38C Jalan Pemimpin
Singapore 577180
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.com
Represented by
© Bosch Security Systems B.V. 2007 | Data subject to change without notice
F2303189131 | Cur: en-US, V3, 28 Jun 2007