Bosch Spexor User manual

spexor
Original instructions
English

English | 2
Shown in illustrations with white housing.
However, spexor is also available in other colors.

Contents
English | 3
About this manual4
Safety5
Description11
Commissioning21
Operation28
Monitoring29
Alarm functions41
Charging the battery44
Updating45
Switching off and storage49
Maintenance and service50
Legal notice55

English | 4
About this manual
Other applicable documents
–Quick Start Guide from the scope of delivery
–Short instructions from the scope of delivery
Presentation of information
Hazards and instructions are marked as follows in this user
manual:
– Note –
Hazardous situation that may result in damage to
property or the environment
▷Marking of an instruction requiring action

English | 5
Safety
▷Read all safety warnings and instructions. Failure to
observe the safety warnings and instructions can result in
short circuits or malfunctions.
▷Carry out all work exclusively according to the complete
operating instructions.
▷Only operate spexor if it is in a technically flawless
condition.
▷Keep the operating instructions and Quick Start Guide in
a safe place. Don’t throw either one away!

English | 6
Safety
Usage in compliance with the intended use
The mobile alarm device spexor monitors its environment
with various sensors and provides information about it or
triggers an alarm in case of deviations. spexor should only
be used in closed rooms or vehicles and only in dry environ-
ments.
spexor may only be used in a private household environment
or in vehicles and under no circumstances in safety-critical
or security-critical areas. spexor is not an alarm system,
burglar detection system or fire alarm system, especially
not in the sense of DIN and VdS standards. spexor is neither
certified as a smoke detector in accordance with standard
EN14604:2005/AC:2008 nor is it suitable for this purpose.
The sensors installed in spexor, such as for air quality, are
not calibrated measuring devices for high-precision mea-
surements.

English | 7
Safety
Hazards
Make no modifications to spexor! Modifications to
spexor can result in hazardous damage to the battery,
short circuit and malfunction. Do not modify spexor in
any way. Do not open spexor. spexor does not contain any
components that you can maintain or replace.
Fire hazard! Only charge the battery of spexor with
the charger supplied by the manufacturer. If a charger
designed for a particular type of battery is used with other
batteries, then there is a risk of fire.

English | 8
Safety
Hazardous vapors or liquids! If the device and battery
are damaged, vapors or flammable liquids may escape
from the battery. The vapors can irritate the respiratory
system. Ventilate the area with fresh air and seek medical
help in case of health complaints. Leaking battery fluid may
cause skin irritation or burns. Avoid contact with it. In case
of accidental contact, rinse the affected body part with
water.
Exposure to fire and heat! Excessive heat can damage
the battery or sensors. There is a risk of explosion or short
circuit. Protect spexor from heat and keep it away from heat
sources such as radiators or stoves and from open flames.
Observe the operating and storage temperature ranges
specified in the Technical Data on page 20.

English | 9
Safety
Loud alarm signal! If an alarm is triggered, the audio
module of spexor emits an acoustic signal that is loud
enough to damage your hearing. Do not hold spexor
directly against your ears or those of other people. Never
use spexor as a baby monitor!
Penetrating moisture! spexor is not protected against
moisture, water or liquids. Penetrating moisture can de-
stroy spexor. Keep spexor away from water or other liquids.
Damaged or entangled charging cable! Damaged or
tangled charging cables can result in a short circuit.
Do not misuse the charger cable for other purposes, such
as carrying or hanging spexor or to pull the plug from the
electrical socket. Keep the charger cable away from heat, oil,
sharp edges, tools and other machines.

English | 10
Safety
Hazards caused by unauthorized use! The nature of
the device’s design and components can result in
hazardous situations if spexor is used by unauthorized
persons. Store unused alarm devices out of the reach
of children. Do not allow persons to use spexor who are
not familiar with this device or who have not read these
operating instructions.

English | 11
Scope of delivery
–Alarm device spexor
(shown in illustrations
with white housing)
–Power supply unit
–USB charger cable
–Short operating
instructions
–Quick Start Guide
with QR code
▷Check that all items listed
in the scope of delivery
have been delivered and
are free of defects. Do
not use damaged parts.
Description

English | 12
Description
Components
1Infrared motion sensor
2LED array bar
3ON/OFF switch
4Micro-USB port
5Screen guard to protect sensors
6Keypad for PIN input with LEDs

English | 13
13 2
546

English | 14
Description
The LEDs in the LED array bar indicate the following states:
Blue Continuous light-up: Smartphone and app
are connected to spexor via Bluetooth®.
White Short continuous light-up: Switch on at the
ON/OFF switch.
Short flashes: spexor is still switched on if
it is touched or moved while monitoring is
deactivated.
Short flashes every 30 seconds: spexor is
active when monitoring is activated.
Three flashes sequentially emitted all
around the LED array bar: Power supply
unit has been detected and charging begins.

English | 15
Description
Green Six flashes sequentially emitted all
around the LED array bar: spexor boots up
after switching on.
Pulse for 60 seconds: Indicates sensor
calibration after monitoring is activated as
well as the remaining time to leave the moni-
tored room. Only then does spexor recognize
an alarm event.
Red Flashing: The alarm is triggered.
Short continuous light-up: Switch off at the
ON/OFF switch.
Depending on the viewing angle, the white light may appear
somewhat violet.

English | 16
Description
Function
spexor is a mobile danger warning device. Its sensors
monitor the environment in closed rooms, e.g. at home,
in the garage, in the garden shed, in the mobile home or
in vehicles. For intrusion detection, spexor continuously
evaluates a combination of the various sensors. If deviations
are registered, spexor triggers an alarm.
spexor can measure volatile organic components (VOC)
in indoor air. These are a measure of air quality. spexor
regularly measures the air quality and transmits the data to
the app. A glance at the app shows you what the air quality
in the room is like. Via its LEDs, spexor can also let you know
when it’s time to ventilate the closed room. The LED display
is often faster than the display in the app. Check the website
for more information.

English | 17
Description
Additional features can only be unlocked with future
updates. We will inform you about this, for example, via our
newsletter.
spexor uses standard technologies for cellular mobile tele-
phony and wireless data transmission: Bluetooth®, WLAN
and GSM (2G). It can also ascertain its location via GPS
data.
Unlike smartphones, spexor has a permanently installed
eSIM card for mobile phone use that cannot be replaced.
Itis roaming-enabled and compatible with all major network
operators.
If you are nearby, spexor establishes a direct connection to
your smartphone and the app via Bluetooth®. This is only
used when setting up and editing the device settings, but

English | 18
Description
not for activating or deactivating monitoring or for sending
alarm messages via your smartphone. This saves mobile
phone time and conserves battery power.
No matter where spexor is installed and how far away from
your smartphone, it sends alarm messages via the mobile
phone network with the permanently installed mobile phone
card first to the automated Bosch data processing system.
From there, the message is forwarded to your smartphone.
At home this is done via WLAN to conserve the battery
power of spexor, at all other locations via mobile phone with
2G, provided that mobile phone reception is available.
The rechargeable battery from spexor lasts for several
weeks on a single charge, and even longer if operated using
WLAN exclusively.

English | 19
Description
Technical Data
–Batteries: Lithium-ion battery pack with 10 Ah, 3.7 V
–Charging current: 1.6 A at 5 V
–Battery self-discharge: approx. 4% per month
–Charging time: approx. 8 h until fully charged
–Supported smartphone operating systems (status 2021):
iOS 12.0 or higher, Android 8.0 or higher
–Frequency band, maximum transmission power:
Bluetooth® Low Energy (BLE): 2.4 GHz, +10 dBm TX power
WLAN: 2.4 GHz, +20 dBm TX power
GSM: 900 MHz, +33 dBm
GNNS: GPS L1 band, GLONASS G1 band
–Localization: GPS

English | 20
Description
–Mobile phone network: GSM, 2G (D2 Vodafone),
eSIM roaming capable
–Sensor detection: up to 5 m radius for motion detection
–Audible alarm signal: approx. 70 ... 85 dB(A)
–Permissible ambient temperature during operation and
storage: –10 … +60 °C
–Permissible ambient temperature when charging the
battery: 0 … +40 °C
–Weight: approx. 340 g
–Dimensions: height 11.5 cm (4.5 inches), largest diameter
7 cm (2.75 inches)
–Type of protection: IP 20