Bosch CRS-MIYS37-FI User manual

Only by authorized personnel!
MIYS37 Wristband Transmitter
Battery change
Not to be used: alcohol, alcohol or vinegar-based cleaning
agents, vinegar, cleaning agents for glass or plastics, disinfectants
(except Incidur®), methylated spirits, benzine, other aggressive
agents, body lotion, sun cream, hand and nail cream. Do not wash.
SOAP Incidur
Cleaning the transmitter
and the accessories
Model: MIYS37 Wristband Transmitter
FCC ID.: W9N-MIYS37
This equipment complies with Part 15 of the FCC rules. Any changes
or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC rules subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept all interference received,
including interference that may cause undesired operation.
Operating Instructions
Accessories
Torx screwdriverT4
CRS-MIYS37-FI
MIYS37 Wristband Transmitter with black button
CRS-NC-S37-RS-US
MIYS37 Wristband Transmitter with black button & reset possibility
Wristband
Clip
3V Battery CR2025
Magnet for reset
Necklace
F.01U.278.520
970.051b V3 2012.11

Safety notes
Trigger an emergency call Shortening the cord Technical data
Changing the wearing method
1x 3VCR2025
Minimum range in free field: 800 ft (250 m)
Ø 1.6 in x 0.53 in ( 42 mm x 13.5 mm)Ø
0.8 oz (22 g)
Radiated power: 20 µW
EN 50134-2
32°F 131°F (0°C ~ 55°C)~
Automatic radio link monitoring: daily check
and at every alarm
Alarm + Alarm
The MIYS37
Wristband Transmitter
must be assigned to
the receiver!
IP 67
Environment class II
Repairs only by authorized service stations
Frequency: 434.01 M zH