boso TM-2450 Manual





1






1
1
a er
DI
EN ISO 81060-2 
BOSCH
+SOHN boso

24h Blood Pressure Monitor boso TM-2450

24h Blood Pressure Monitor boso TM-2450
New packaging concept
Sustainable and clearly arranged

24h Blood Pressure Monitor boso TM-2450
Cuffs
New sizes. New design.
Can be washed off and is latex-free.
S | M | M-right | L | XL
Cuffs
Size M CA91 20 - 31 cm 259-4-400
Size M-right CA91R 20 - 31 cm 259-4-440
Size L CA92 28 - 38 cm 259-4-410
Size XL CA94 36 - 50 cm 259-4-430
Size S CA93 15 - 22 cm 259-4-420
Protective covers (10 pieces)
Size M left and right 259-7-400
Size L 259-7-410
Size XL 259-7-430
Size S 259-7-420
Size M and Size L (each 5 pieces) 259-7-405

24h Blood Pressure Monitor boso TM-2450
Varta Premium Charger
Safety switch-off
4 charging slots
Varta Premium Batteries
2100 mmAh / 600 measures
The VARTA Recharge Recycled Batteries are
made from 11% recycled material and combine
the benefits of low self-discharge with environ-
mental friendliness.

24h Blood Pressure Monitor boso TM-2450
24-hr blood pressure monitor
boso TM-2450
Transport case
Battery charger
2 x battery packs with two batteries
(one set already inserted into the device)
Cuffs for adults (can be washed off, latex-free)
- Size M (13 x 62 | 20 – 31)
- Size L (16 x 68 | 28 – 38 )
-Cuffs, optional: S (10 x 38 | 15 – 22), XL (17 x 76 | 36 – 50)
Hip bag with removeable strap and belt
Instruction manual for:
- boso TM-2450
- profil-manager XD
- Important notes
- Battery charger
CD-ROM – boso profil-manager XD
USB connection cable
0124
Kompatibel mit
boso ABI-system 100 | boso ABI-system 100 PWV
boso TM-2450 | boso TM-2430 PC 2 | boso medicus system
boso medicus PC 2 | boso medilife PC 3
Version 6.0
PROFIL-MANAGER
Die leistungsstarke Software für
die PC-gestützte Blutdruckkontrolle
und Therapieüberwachung.
Gebrauchsanweisung
Installationsanleitung
Scope of delivery
BOSCH + SOHN GmbH u. Co.KG
Bahnhofstraße 64
72417 Jungingen, Germany
• boso TM-2450
• boso TM-2430
• boso ABI-system 100
• boso ABI-system 100 PWV
• boso medicus system
MD
PROFIL-MANAGER
V 6.0
LOT 202007_01

24h Blood Pressure Monitor boso TM-2450
High-performance and effective
- Measures during pumping and drain process
- Arrhythmia detection
- Activity sensor
- Quick and easy programming
- Freely programmable intervals
- Sleep button
- Storage of 600 measurements
- Great wearing comfort thanks to the small and lightweight design with only 2 batteries
- Extremely low noise level
- Ergonomic hip-bag including transport strap and belt
20.5% smaller
22,5% lighter
33% quieter
compared to the previous model boso TM-2430 PC 2

24h Blood Pressure Monitor boso TM-2450
Overview
Device TM-2430 PC 2 TM-2450
Dimensions 72x27x100 mm 66x25x95 mm
Weight 155 g 135 g
Adapter socket Jack micro-USB
Measurement storage 350 600
Connection cable Jack to USB Micro-USB to USB
Battery 3 pieces 2 pieces
Battery charger 4 batteries 4 batteries
Cuff sizes S | M | L S | M | L | XL
Compatible cuffs no no
Air connection plugs identical identical
Transport case Plastic Cardboard
Pump volume loud very quiet
Measuring function drain pump /drain
Temperature sensor no yes
Air pressure no yes
Arrhythmia detection no yes
Activity sensor no yes
Pressure curve no yes
On/off switch yes no
Reset button yes no

24h Blood Pressure Monitor boso TM-2450
Device overview
Cuff connection socket
AUTO button (day/night button)
Battery compartment
2LR6 (AA) batteries
Micro USB connection
START/STOP button
Batterie compartment lid

24h Blood Pressure Monitor boso TM-2450
Function symbols on the measuring device
1.
2.
3.
START/STOP AUTO/
START/STOP AUTO/
START/STOP AUTO/
START/STOP AUTO/
START/STOP button
AUTO button (day/night button)
Automatic mode active
Sleep mode active
Battery status display:
1. Battery charged
2. Battery partially charged
3. Battery empty (no further measurement or data transfer possible)
Storage full – 600 measures (no further measurements possible)

24h Blood Pressure Monitor boso TM-2450
Attaching the cuffs
Place the cuff on the unclothed upper arm so that
the white marking lies on the arteria brachialis.
The cuff should lie roughly 2-3 cm above the elbow
bend and should not be too tight. Two fingers should
fit between the arm and cuff.
Maximum one finger between the arm
and XL cuff.
Cuff
connection
socket
Bag
Air connection
plug
white
marking
2–3 cm
Tape
Cuff
connection
socket
Bag
Air connection
plug
white
marking
2–3 cm
Tape

24h Blood Pressure Monitor boso TM-2450
Start of the interval automation
To start the automatic interval function, press and hold the black AUTO button with
the display activated until “ ” appears in the blood pressure monitor display and
is confirmed with a short signal tone (after approx. 5 seconds).
If the display is off, activate it by pressing any button.
If the device is operated in “Sleep button" mode, the patient must press the black
AUTO button before going to sleep. Next to the " " for the automatic system,
a " " appears in the display. After getting up, the black AUTO button must be
pressed again.
The “ ” symbol disappears in the display.

24h Blood Pressure Monitor boso TM-2450
Performing a measurement
Automatic adjustment of the pumping level (only in automatic interval mode)
The boso TM-2450 automatically pumps up to the required pressure level.
If this pumping level is not sufficient, the device automatically pumps
approx. 60 mmHG above the original pumping level.
Limiting the maximum pumping level
The boso TM-2450 has the option to limit the pumping level.
For the corresponding procedure, please refer to the boso profil-manager XD
instruction manual.
Performing a manual measurement
In addition to the automatic measurements, the patient can start a manual measurement
at any time. This can be sensefull after situations with physical or emotional stress
for example. To do so, simply press the white START/STOP button.

24h Blood Pressure Monitor boso TM-2450
Cancellation of the measurement
To cancel the measurement, the white
START/STOP button must be pressed on
the boso TM-2450.
If the measurement is to be taken at a later time
a manual measurement can be taken using the
START/STOP button at any time.

24h Blood Pressure Monitor boso TM-2450
Ending the measurement and transferring the measured data
As soon as the device is removed from the patient after the 24-hour measurement
has been completed, the automatic function must be switched off. To do so, press and
hold the black AUTO-button while the display is activated until the ‘ ’ symbol
disappears in the blood pressure monitor’s display (approx. 5 seconds). If the display
is off, activate it by pressing any button.
After that, connect the TM-2450 to a computer with a PC-connection cable.
Transfer the data according to the boso profil-manager XD instruction manual.
After transferring the measured data, it his highly suggested to delete
the data memory.

24h Blood Pressure Monitor boso TM-2450
Replacing the batteries
We recommend that after each 24-hour measurement, the used battery set is
changed and replaced using a newly charged battery set.
To prevent any data loss, the data stored on the boso TM-2450 are buffered
using an internal battery. These batteries are automatically charged via the
battery pack. With a fully charged battery pack, the data remain stored for
approx. 10 days.
To fully charge the battery for the first start-up, switch on the device with a fully
charged battery pack for 24 hours.
Step 2
Remove empty
batteries
Step 1
Press the battery compartment
lid down firmly and then slide it
outwards.
Step 3
Insert charged batteries
in the battery
compartment
Step 5
Close batterie compartment lid
Step 4
Note the polarity

24h Blood Pressure Monitor boso TM-2450
Charging the batteries Longer storage of the device
Insert the rechargeable batteries into the charger and plug it
into the power socket. If the blue LED lights up, the battery packs are
being charged. The charging process takes roughly 11 hours for a fully
charged battery pack.
On average, a charge of approx. 10 hours suffice following
a 24-h measurement (cf. charger’s instruction manual).
If the device is not used for a longer period of time (4 weeks or more), remove
the batteries to prevent possible damage due to leakage.
Before the device is then attached to a patient again, the internal battery must
be charged and the device reprogrammed.
Insert freshly charged batteries.
Please leave the battery packs in the device for two hours.
The internal battery is recharged during this time.
Reprogram the device.
Before attaching the device to a patient, replace the batteries with a set
of freshly charged ones.

24h Blood Pressure Monitor boso TM-2450
Important note
To ensure proper functioning of the boso TM-2450 over 24 hours, only
use rechargeable batteries rated at least 1900 mAh, 1.2 V NiMH.
In addition to the two rechargeable batteries required for the power
supply, the boso TM-2450 also contains an internal battery to save the
measurement data and the program settings in the device.
To prevent any loss of programming and stored measured
values when the internal battery is discharged, lease follow
the following procedure:
- Insert charged batteries into the device even when not in use.
- The state of charge of the internal battery is thus constantly kept
at a high level. If the internal battery’s power supply is interrupted,
the settings of the boso TM-2450 will be lost after approx. 10 days.
- Before attaching the device to a patient, please replace the batteries in the
device with a set of freshly charged batteries.

24h Blood Pressure Monitor boso TM-2450
Error codes
Error code Cause Remedy
0:00 Time sets to 0:00 when battery is replaced Device must be reprogrammed.
E03 / E90 Zero point adjustment not possible Deflate cuff completely.
E04 Empty battery Charge or replace batteries.
E05 Leakage Disconnect the cuff from the device and reconnect.
If the error occurs repeatedly, contact your sales partner.
E06 Pressure above 299 mmHg The arm must be kept still during measurement.
E07 User abort via START/STOP button
E08 / E10 No or non-interpretable oscillations The arm must be kept still during measurement.
E09 Error of the activity sensor Remove and re-insert the battery packs.
E20 Pulse < 30 or > 200 Check the position and fit of the cuff.
E21 No interpretable oscillations
E22 In the area of diastole (E21) or systole (E22) Check the position and fit of the cuff.
E23 Systole-diastole < 10 / > 150 mmHg Check the position and fit of the cuff.
E30 Measuring time longer than 180 seconds Contact your sales partner.
E31 Deflation longer than 90 seconds Contact your sales partner.
E48 Pulse cannot be measured The arm must be kept still during measurement.
E52 Storage error Contact your sales partner.
E91 Pressure inside the cuff too high / Set a higher maximum pressure. The arm must be kept still
maximum pressure set too low during the measurement.

24h Blood Pressure Monitor boso TM-2450
Cleaning and disinfection
To clean the boso TM-2450 and the cuff, please use a soft cloth that may be moistened with soapy water. For the protective covers: machine
wash at max. 60 °C.
Never use solvents, benzine, spirits or abrasive cleaners for cleaning!
For disinfection by wiping (exposure time at least 5 minutes) the device, we recommend the disinfectant Antifect Liquid (Schülke & Mayr).
We recommend using spray disinfection for disinfecting the cuff. Especially if the device is used by multiple patients, make sure that the cuff is
cleaned and disinfected regularly.