BOSS ILLUMINATION RIM 100 User manual

www.bia.lighting | [email protected]page 1 / 2
PRODUCT MANUAL
COPYRIGHT BIA ©2019 V10.19
Disclaimer: Please read these warranty
and installation instructions carefully
before installing the product.
BIA products are manufactured
and certied in accordance with all
mandatory Australian Standards.
All products must be installed by a
licensed electrician, in accordance
with relevant Australian Standards.
Technical data and information subject
to changes, visit our website for the
most updated version.
WARRANTY STATEMENT This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will x
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specications and other information, modify products and discontinue items without prior notication.
PRODUCT VARIANTS
Power: 100W
150W
200W
CCT: 5000K
Beam Angle: 60°
90°
120°
PRODUCT SPECIFICATIONS
Input Voltage : 100-277VAC
Ambient Temperature : -10 to 45°C
Dimming : 1-10V
RIM
HIGH BAY LIGHT
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
ADDITIONAL INFORMATION
1. This luminaire can be dimmable with the installation of a 1-10V
dimmable device.
2. Cable for 1-10V dimming must be terminated if not in use.
3. Luminaire can be installed with a hook or a mounting bracket.
Refer instructions overleaf.
4. Installation must be carried out with care to ensure the surface of
the luminaire is not scratched or damaged. Damaged surfaces will
result in material corrosion when exposed under harsh weather
conditions.
5. Please ensure luminaire cover is sealed.
6. If cleaning maintenance is required, use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
PARTS INCLUDED
Mounting
Bracket
PC lens
IP65
OPTIONAL COMPATIBLE PARTS sold separately
High Bay 3-pin AU
Plug
Hook

www.bia.lighting | [email protected]page 2 / 2
PRODUCT MANUAL
COPYRIGHT BIA ©2019 V10.19
INSTALLATION INSTRUCTIONS
A HOOK
1. Before commencing installation, ensure the main power is
switched off.
2. Screw in the hook at the top of the luminaire.
3. Tighten the screw nut.
4. Tighten the screw to secure the hook.
5. Hang luminaire onto designated location, fasten the screw on the
hook.
6. Optional: connect 1-10V dimming device. Cable must be
terminated if not in use.
7. Connect plug to 240VAC power socket.
8. Turn on main power.
B BRACKET
1. Before commencing installation, ensure the main power is
switched off.
2. Use the luminaire brackets to measure ceiling holes. Prepare
holes using M10 expansion screw bolts.
3. Adjust the luminaire bracket to the desired direction, fasten with
M8 screws.
4. Mount the bracket onto the prepared holes and secure with the
screws provided.
5. Optional: connect 1-10V dimming device. Cable must be
terminated if not in use.
6. Connect plug to 240VAC power socket.
7. Turn on main power.
2
6
6
7
3
3
4
4
5
5
DIAMENSION DIAGRAM
226mm 275mm 275mm
148mm
152mm 152mm
223mm30mm
156mm
251mm
105mm
120mm
230mm
173mm
165mm
25mm
100W 150W 200W
mounting
bracket
mounting
bracket