BOSS ILLUMINATION VIO.S User manual

www.bia.lighting | [email protected]page 1 / 2
PRODUCT MANUAL
COPYRIGHT BIA ©2020 V08.20
WARRANTY STATEMENT This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will x
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specications and other information, modify products and discontinue items without prior notication.
PRODUCT VARIANTSPRODUCT SPECIFICATIONS
Input Voltage : 100-240VAC
Operating Temperature : -10 to 40°C
Weight : 7.6kg
Material : Aluminium
VIO (TYPE S)
POLE LIGHT
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
Power : 30W
40W
50W
CCT : 3000K
4000K
5000K
Dimming: Non-dimmable
1-10V
DALI
IP65 IK0890mm
PARTS INCLUDED
8-10m CableLuminaire
Disclaimer: Please read this product
manual carefully before installing the
product.
Warranty is void if installation guidelines
are disregarded, if the product has been
modied, or if damage is caused by
misuse or improper installation.
Images, drawings and diagrams are for
illustrative purposes only.
BIA products are manufactured
and certied in accordance with all
mandatory Australian Standards.
Technical data and information subject
to changes. Please visit our website for
latest version.
x1
ADDITIONAL INFORMATION
1. 1-10V and DALI dimmable option available. These cables must be
terminated if not in use.
2. Please ensure luminaire cover is sealed.
3. If cleaning maintenance is required, disconnect from mains
supply and allow luminaire to cool. Use a clean microbre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
4. Do not use harsh chemicals or solvents. Do not use high
pressure cleaners.
5. Care must be taken during installation and maintenance to
prevent accidental damage to the surface of the luminaire. These
damages may result in corrosion.

www.bia.lighting | [email protected]page 2 / 2
PRODUCT MANUAL
COPYRIGHT BIA ©2020 V08.20
L
L
N
N
E
E
DIMENSION DIAGRAM
4
5
249mm
Ø450mm
752mm
Ø90mm
2
1-10V
DALI
+
+
DA+
DA+DA-
DA-
-
-
3
INSTALLATION INSTRUCTIONS
1. Ensure pole of the correct diametre has been installed/supplied.
2. Feed wiring cable through spigot. Cable should be terminated
within the pole and to the IP rating required.
3. Optional: If installing dimmable version, connect cable within
the cavity of the holder.
4. Place luminare over spigot and slide it all the way in.
5. Tighten the screws to rmly secure luminaire.
IMPORTANT NOTE: All connections made must be
waterproofed to the appropriate IP rating for the application.
Warranty is void if connection IP ratings are not met.