Breezesta fiberon Coastal Adirondack FIB-AD-0102 User manual

Coastal Adirondack
FIB-AD-0102

2FIB-AD-0102 Assembly 5/21
A B
C
F
DG
EH
Please read entire instructions before beginning.
Coastal Adirondack Hardware Parts
Part Description Part Number Quantity
a#8 x 1- in. Torx Screw H-0000-S815 4
b#8 x 2 in. Torx Screw H-0000-S82 4
cDouble Screw H-0000-DS 2
d5/16 in. x 1- in. Chair Bolt H-0000-CB51615 6
eT20 and T25 Torx Bit H-0000-CTD 1
Suggested Tools
Drill
Plastic Mallet
a c edb
Coastal Adirondack Furniture Parts
Part Description Part Number Quantity
ALe Front Leg PRT-00123 1
BRight Front Leg PRT-00125 1
CUnder Arm Support PRT-00124 2
DLe Arm Assembly SA-00046 1
ERight Arm Assembly SA-00047 1
FAdirondack Spreader SS-22.187 1
GBase Assembly SA-00043 1
HBack Assembly SA-00048 1

3FIB-AD-0102 Assembly 5/21
b x 2
C
a x 2
F
d x 4
G
A
D
c
1. Attach Le Front Leg Ato Le Arm Assembly Dby
inserting Hardware dinto the pre-drilled holes and
rotating Le Front Leg Aclockwise, stopping when
the assembly is tight in the orientation shown.
2. Place Under Arm Support Cinto the pre-cut slot and
attach it using Hardware b.
4. Attach Adirondack Spreader Fto the previous
assemblies using Hardware a.
5. Place Base Assembly Gbetween the previous
assemblies and attach it using Hardware d.
3. Repeat Steps 1-2 for Right Front Leg B, Right Arm
Assembly Eand the other Under Arm Support C.

4FIB-AD-0102 Assembly 5/21
H
6. Slide Back Assembly Hbetween the back legs of
Base Assembly Gand under the Le and Right Arm
Assemblies Dand E.
7. Attach Back Assembly Hto the underside of the
Le and Right Arm Assemblies Dand Eusing four
of Hardware c.
8. Align the bottom support of Back Assembly H
with the pre-drilled holes in the back legs of Base
Assembly G and secure using two of Hardware b.
d x 4
b x 2
©2021 Fiberon. All rights reserved. FIBERON and the Fiberon logo are trademarks of Fiber Composites, LLC. Registered trademarks are registered in the U.S. and may be registered internationally.