Breezesta CO-0100 User manual

REV01-2/19
COASTAL SWIVEL DINING CHAIR
CO-0100
1 CO-0100 Assembly

A B
C
D
E
a
b c d e
Suggested Tools:
Drill, Plastic Mallet, 1/2" Socket Wrench
F
G
H
I
f
g h
ij
PARTS
PART DESCRIPTION PART NO. QTY
A LEFT LEG ASSEMBLY SA-00083 2
B RIGHT LEG ASSEMBLY SA-00084 2
C SWIVEL SUPPORT ASSEMBLY SA-00085 1
D SEAT ASSEMBLY SA-00089 1
E ARM CONNECTOR ASSEMBLY SA-00086 2
F UNDER ARM SUPPORT PRT-00146 2
G LEFT ARM ASSEMBLY SA-00087 1
H RIGHT ARM ASSEMBLY SA-00088 1
I BACK ASSEMBLY SA-00069 1
HARDWARE
PART DESCRIPTION PART NO. QTY
a 1/4"-10 X 3" LAG SCREW UNPAINTED H-0000-S103 4
b 5/16" X 1-1/2" CHAIR BOLT H-0000-CB51615 2
c 5/16" X 2-1/8" CHAIR BOLT H-0000-CB516218 12
d 1" HEX BOLT 5/16" DIA H-0000-HB1 4
e #8 X 2" TORX SCREW H-0000-S82 2
f #8 X 2-1/2" TORX SCREW H-0000-S825 4
g DOUBLE SCREW H-0000-DS 2
h T25 & T20 TORX BIT H-0000-CTD 1
i COASTAL SWIVEL ASSEMBLY - TOP H-0000-SAC 1
j COASTAL SWIVEL ASSEMBLY - BOTTOM H-0000-SAC 1
CO-0100 Assembly 2

T25
B
x2
A
x2
c
x8
C
T25
i
a
x4
T20
F
f
x2
G
E
g
1.
Connect Parts A & B to Part
C using Hardware c as shown
4.
R
otate Part E clockwise
until tight in the orientation
shown
3.
Attach Part E to Part G
using Hardware f
5.
Place Part F into the pre cut
slot and attach with Hardware f
Please read entire instructions
before beginning
2.
Attach Hardware i to the
previous assembly using
Hardware a
6.
Repeat steps 3-5 for Parts
H, E, & F
3 CO-0100 Assembly

T25
c
x4
D
T25
T20
I
e
x2
b
x2
j
d
d
x4
7.
Place Part D between the
previous assemblies and
attach with hardware c
9.
Using Hardware d & a 1/2" wrench,
attach Hardware j, assembly may be
made easier if turned upside down
8.
Connect Part I to the
assembly as shown
Bottom View
10.
Insert Hardware j into i as shown & push
down firmly until the assembly clicks in place
4 CO-0100 Assembly