Breezesta PIEDMONT PT-0601 User manual

REV03-12/19
PIEDMONT DINING SWIVEL ROCKER
PT-0601
1 PT-0601 Assembly

A
B
C
D
F
E
a
b c
d e
Suggested Tools:
Drill, Plastic Mallet, 1/2" Socket Wrench
G
H
I
J
f
g
PARTS
PART DESCRIPTION PART NO. QTY
A BASE SIDE ASSEMBLY SA-00225 2
B SWIVEL SUPPORT PRT-00411 2
C BASE SPREADER PRT-00410 2
D SEAT ASSEMBLY SA-00226 1
E LEFT ARM PRT-00417 1
F RIGHT ARM PRT-00418 1
G LEFT FRONT LEG PRT-00415 1
H RIGHT FRONT LEG PRT-00416 1
I FRONT RAIL PRT-00414 1
J BACK ASSEMBLY SA-00227 1
HARDWARE
PART DESCRIPTION PART NO. QTY
a #8 X 1-1/2" TORX SCREW H-0000-S815 2
b #8 X 2-1/2" TORX SCREW H-0000-S825 10
c
1
1/4"-10 X 3" LAG SCREW (Painted) H-0000-S103 8
c
2
1/4"-10 X 3" LAG SCREW (Unpainted) H-0000-S103 4
d 1" HEX BOLT 5/16" DIA H-0000-HB1 4
e DOUBLE SCREW H-0000-DS 2
f T20 & T25 TORX BIT H-0000-CTD 1
g
SWIVEL ROCKER DINING ASSEMBLY-GEN 3
H-0000-SRDA3 1
PT-0601 Assembly 2

T25
C
x2
A
c
1 x2
T25
B
x2
c
1 x4
T25
c
2 x4
g
D
d
x4
1.
Attach Parts C to A using the hardware shown
3.
While upside down press, or
hammer, Parts B into the grooves
& attach them using the hardware
shown
4.
Connect Hardware g using
Hardware c2 (unpainted) as
shown. The top plate of the swivel
will need to be rotated to access
the mounting holes in the bottom
plate.
Please read entire instructions
before beginning
2.
Repeat Step 1 to attach the other Part A
to Parts C
5.
Connect seat assembly (Part D)
using Hardware d as shown.
3 PT-0601 Assembly

T20
T20
T20
T20
I
b
x2
F
H
e
b
x4
b
x4
a
x2
7.
Connect the previous assemblies
to Part I using Hardware b
9.
Attach Part J using the
hardware shown.
8.
Connect the previous assembly to
Part D using the hardware shown
Note:
Make sure Step 7 is
connected on the front of Part D
as shown
Side View
6.
Repeat Step 5 for Parts E & G
5.
Connect Part F to H with Hardware e
by rotating Part F clockwise until the
assembly is tight
4 PT-0601 Assembly