Breezesta ELEMENTZ FIRE & ICE User manual

ELEMENTZ FIRE & ICE TABLE
FT-1501
1 FT-1501 Assembly

A
B
C
ab
H-0000-20BK*
(20" Burner Kit)
AC-9906*
(Glass Guard)
*These items are shipped loose with the Fire Table. Please
follow the manufacturer's instructions for their installation.
AC-9907*
(Table Cover)
Suggested Tools:
Drill, Plastic Mallet
Please read entire instruction before beginning
PARTS
PART DESCRIPTION PART NO. QTY.
A 48" ROUND FIRE TABLE TOP prt-00719 1
B FIRE TABLE BASE prt-00720 1
C FIRE TABLE BASE PULLOUT SA-00357 1
HARDWARE PACK
ITEM NO. DESCRIPTION PART NUMBER QTY.
a
#8 x 2-1/2" TORX SCREW
H-0000-S825 6
b T20 & T25 TORX BIT H-0000-CTD 1
2 FT-1501 Assembly

a
A
B
Place Table Top A on top of
the Base B . The square
frame on the bottom of the
table top will surround the
top frame of the base. Install
(3) of hardware a through
the pre-drilled holes on the
inside of the base and out
into the square frame on the
table top on each side as
shown.
Once these parts are
fastened, follow the
manufacturers instructions to
install the burner and glass
guard. The glass guard must
remain in place when the
burner is lit. The cart (item C)
slides under the base on the
open side.
CAUTION:
Burner and
glass guard will be hot when
ignited.
3 FT-1501 Assembly