Breezesta PT-0600 User manual

REV06 - 02/2020
PIEDMONT CLUB SWIVEL ROCKER
PT-0600
1 PT-0600 Assembly

A
B
C
D
F
E
a b c d e
Suggested Tools:
Drill, Plastic Mallet, 1/2" Socket Wrench
G
H
f
PARTS
PART DESCRIPTION PART NO. QTY
A LEFT SIDE ASSEMBLY SA-00232 1
B RIGHT SIDE ASSEMBLY SA-00233 1
C BASE SPREADER PRT-00433 2
D BASE LEG ASSEMBLY SA-00336 2
E BACK ASSEMBLY SA-00234 1
F DS LOUNGE CHAIR SEAT SLAT SS-24.5 6
G BACK SPREADER PRT-00443 1
H FRONT SPREADER PRT-00442 1
HARDWARE
PART DESCRIPTION PART NO. QTY
a #8 X 1-1/2" TORX SCREW H-0000-S815 12
b #8 X 2-1/2" TORX SCREW H-0000-S825 12
c 1" HEX BOLT 5/16" DIA H-0000-HB1 4
d 1-1/2" HEX BOLT 5/16" DIA H-0000-HB15 4
e T20 & T25 TORX BIT H-0000-CTD 1
f
SWIVEL ROCKER CLUB ASSEMBLY-GEN3
H-0000-SRA3C 1
PT-0600 Assembly 2

T20
b
x6
A
B
E
G
b
x2
T20
F
x6
H
T20
C
x2
D
x2
b
x4
a
x12
Mortise
1.
Assemble Parts A & B using
Parts E & G using Hardware b
2.
Starting closest to the back, place
Parts F into the mortises of Parts A &
B, finishing with Part H. Attach part F
with hardware a, attach Part H with
hardware b.
3.
Attach Parts D to Parts C
using Hardware b
Please read entire instructions
before beginning
3 PT-0600 Assembly

f
c
x4
d
x4
5.
Attach the base assembly from Step 3
to the swivel brackets using Hardware d.
4.
Attach Hardware f to the previous
assembly using Hardware c. The swivel
bracket on Hardware f is slotted and can
be adjusted forward or back as needed.
To start, slide the chair as far back as
the slots will allow (as shown) and see
how the chair feels with the cushions
you have once it is fully assembled. If
the chair feels like it leans too far back,
you can loosen the four bolts and slide it
to a comfortable position.
4 PT-0600 Assembly