Bretford 3577 User manual

Adult and Youth Connections Work Centers with Casters
Assembly Instructions
Phillips Screwdriver
Rubber Mallet
Allen Wrench (provided)
PARTS LIST
HARDWARE LIST
TOOLS REQUIRED
1
3577 3520 3517 3514 3522 3518 3560
3519 3564 3526 3544 3546 3549 3566
Qty Part# Description
1 SA2346 30 x 30 Wood Top - 3577
SA1644 36 x 24 Wood Top - 3520
SA1646 36 x 30 Wood Top - 3517 & 3544
SA2091 42 x 30 Wood Top - 3514
SA1645 48 x 24 Wood Top - 3522
SA1647 48 x 30 Wood Top - 3518 & 3546
SA2086 60 x 24 Wood Top - 3560
SA1648 60 x 30 Wood Top - 3519 & 3549
SA2085 72 x 24 Wood Top - 3564
SA1715 72 x 30 Wood Top - 3526 & 3566
2 022-1591 Lower Leg Assembly - 3520, 3522, 3560 & 3564
022-1713 Lower Leg Assembly - 3577, 3517, 3514, 3518, 3519 & 3526
022-1738 Lower Leg Assembly - 3544, 3546, 3549 & 3566
1 022-1589 Right Upper Leg Assembly - 3577, 3520, 3517, 3514, 3522
3518, 3560, 3519, 3564 & 3526
022-1735 Right Upper Leg Assembly - 3544, 3546, 3549 & 3566
1 022-1590 Left Upper Leg Assembly - 3577, 3520, 3517, 3514, 3522
3518, 3560, 3519, 3564 & 3526
022-1736 Left Upper Leg Assembly - 3544, 3546, 3549 & 3566
1 010-3471 Modesty Panel - 3577
010-2321 Modesty Panel - 3517, 3520 & 3544
010-3080 Modesty Panel - 3514
010-2324 Modesty Panel - 3518, 3522 & 3546
010-2327 Modesty Panel - 3519, 3549 & 3560
010-2706 Modesty Panel - 3526, 3564 & 3566
1 010-3472 Cord Bin - 3577
010-2322 Cord Bin - 3520
010-2323 Cord Bin - 3517 & 3544
010-3082 Cord Bin - 3514
010-2325 Cord Bin - 3522
010-2326 Cord Bin - 3518 & 3546
010-3076 Cord Bin - 3560
010-2328 Cord Bin - 3519 & 3549
010-3075 Cord Bin - 3564
010-2707 Cord Bin - 3526 & 3566
1 017-0519 Support Tube - 3519, 3526, 3549, 3560, 3564 & 3566
Ref. Qty Part# Description
AA 12 030-0402 10-32 x 5/8” Combo Screws
BB 12 030-0240 1/4” External Lockwashers
CC 4 030-0396 3/8-16 x 1/2” Set Screws
DD 4 030-0325 1/4-20 1/2” Combo Truss Screws
EE 6 030-0168 #8 x 1/2” Wood Screws
FF 2 030-0433 10-32 x 1/2” Knurled Screws
GG 2 030-0465 Retaining Washers
HH 2 030-0354 10-32 x 1 1/2” Button Screws (60 & 72” Models ONLY)
1 030-0397 Allen Wrench
2 015-0002 4” Casters w/o Lock
2 015-0003 4” Casters with Lock

2
Lay wood top on a carpeted surface with holes facing upward. Position
the legs onto wood top with holes facing in and toward back as shown.
LOOSELY attach with screws (AA) and washers (BB).
STEP 1
AA BB
AA
BB
BACK EDGE
FRONT EDGE
Lay wood top on a carpeted surface with holes facing upward. Attach support tube with
screws (HH) as shown. NOTE: Mounting holes are about 3 3/16” off the center of the table.
STEP 1 - FOR 60” & 72” MODELS ONLY
3 3/16”
HH

Set desired height and insert screws (CC) into
legs and tighten with Allen wrench (provided).
STEP 2
3
CC
The edge closest to
these holes with inserts
is the back edge.
EE
DD
Slide in modesty panel. Tightly secure modesty panel to legs with
screws (DD). Attach to wood top using screws (EE). TIGHTEN ALL
HARDWARE AT THIS TIME. NOTE: Any “C” frames for shelves
must be assembled prior to attaching the modesty panel.
STEP 3
DD EE

Part # 031-7678
06.25.07 CZ 4
STEP 4
Push or tap (with a rubber mallet) casters into
bottom of legs. Stand unit upright.
NOTE: Casters should be fully installed into leg
so that the entire stem is inside leg.
Hook cord bin onto hooks of modesty panel and attach to
worksurface using screws (FF) and washers (GG).
STEP 3
FF
GG