Bretford FLIP TOP QUATTRO TABLE User manual

AssemblyInstructions
FLIP TOP
QUATTROTABLES
Parts List
Qty.PartNo. Description
4 010-3511 CornerTies
4 017-0686 Bottom Legs
4 017-1026 Top Legs
1 ** Worksurface & Flip UpTopAssembly
**Partnumbervarieswitheachsizetable.
Hardware List
Qty.PartNo. Description
8 030-0396 3/8-16 x 1/2" Set Screws
4 030-0852 5/16-18x1-1/4"HexFlangeCapScrews
4 015-0084 3/8-16 Glides
** 030-0383 #10 x 1/2" Truss Head Screws
**(3) For 30" or 36" Cord Bins
**(5) For 42" or 48" Cord Bins
**(7) For 60" Cord Bins
**(9) For 72" or 84" Cord Bins
Tools Required
PhillipsScrewdriver
AllenWrench
AdjustableWrench
SAFETY WARNING
Note: TWO PERSON
ASSEMBLY REQUIRED

Lay wood top on a carpeted surface as shown. Insert a leg into each corner.
The holes on the front legs should face to the inside of the table. The back leg
holes can face each other or to the inside of the table which ever you prefer.
NOTE: Theview shown has all leg holes facing into thetable.
STEP 1
Attach legs with 5/16-18 x 1-1/4" Hex Flange Cap screws
(030-0852)andcorner ties(010-3511).Tightenallscrews.
STEP 2
Cornertie
010-3511 5/16-18x1-1/4"
030-0852
All Leg
HolesFace
Inward

Screwglides(015-0084)into bottom legs (017-0686).
Glides should be fully installed into legs so that the
entire stem is inside of leg.
STEP 3
Position holes in legs so that they face each
other. Insert bottom legs into top legs. Set
desiredheightandinsert3/8-16x1/2" (030-0396)
Set screws into legs and tighten withAllen
wrench. Stand the unit upright.
STEP 4
3/8-16 x 1/2"
Set Screw
030-0396
Glide
015-0084
BottomLeg
017-0686

Part#031-5137
Rev 10.12.10 CZ
Bretford Bretford Ltd.
11000 Seymour Avenue 2 Etongate
Franklin Park, IL 60131 110 Windsor Road
TEL: [phone] Slough, Berkshire SL1 2JA England
800.521.9614 TEL: [phone]
FAX: [phone] FAX: [phone]
800.343.1779 www.bretford.com
FIRST,Hook flange ofcord
binunderskirt flange.
Cord Bin Flange
SkirtFlange
FIGURE 1
FIGURE 2
STEP 5
Position the cord bin between the back legs. Hook the cord bin flange under the
skirt flange (FIGURE 1). Then secure cord bin to top using the #10 x 1/2" screws
(030-0383)asshowninFIGURE 2. Carefully turn tableover.