Bristan W SNK6 C User manual

Unslotted Belfast
Sink Waste
(W SNK6 C/G/INF/BN/ABRZ)
Fitting Instructions
& Contents List
(FI W SNK6) (Rev.D2)
AFTERCARE INSTRUCTIONS
Your fitting has a high quality finish and should be treated with care to preserve the
visible surfaces.
All surface finishes will wear if not cleaned correctly, the only safe way to clean your
mixer is to wipe with a soft damp cloth. Stains can be removed using washing up
liquid. All bath cleaning powders and liquids will damage the surface of your fitting,
even the non-scratch cleaners. NOTE: Never use abrasive detergents or
disinfectants or those containing alcohol, hydrochloric acid or phosphoric
acid.
GUARANTEE
All products are manufactured to the highest standards and a 5 year guarantee
covers any defect in manufacture.
All products must have access for servicing or replacement during the life of
the product.
In the interests of continuous product development we reserve the right to alter
specification as necessary
PRODUCT CODE:
PRODUCT IDENTIFICATION CODE LASER ETCHED ON PRODUCT
Installer please fill in code here . (Where applicable)
TELEPHONE HELPLINE! [phone]
Bristan Group Limited
Birch Coppice Business Park
Dordon
Tamworth
Staffordshire
B78 1SG
UK
A Masco Company
Website: www.bristan.com
Telephone:[phone]
Facsimile: [phone]
Email: [email protected]
Bristan recommend E-Cloth for cleaning all of our
bathroom & kitchen products. Using just water, E-cloth
gives a smear free, deep clean by breaking up and holding
dirt, which normal cloths leave behind. Order through
your Bristan stockist. (ORDER CODE: ECLOTH)

1. Identify all components and check for completeness, particularly before
commencing installation.
2. Fit the waste body (4) and foam washer (5) to the sink.
3. Fit the foam washer (6) underneath of the sink as shown on the diagram, secure
by tightening the backnut (7).
Use a pure silicon sealant where necessary.
4. Fit the stay (1) to the sink.
5. Check all joints and connections for leaks.
6. See the back page for aftercare instructions
PLEASE NOTE:
In the unlikely event you find a part missing, please contact our Customer Service
helpline on 0844 701 6273 for immediate dispatch of part
N.B. Before installation, please write the name and product code of your
fitting in the spaces provided overleaf. This will ensure a speedier service if
you should need to phone the helpline.
INSTALLATION
SINK
5
7
6
4
3
2
1
WORK TOP
COMPONENTS
1. Sink Stay
2. Chain Assembly
3. Plug
4. Waste Body
5. Foam Washer
6. Foam Washer
7. Backnut
www.qssuplies.co.uk