Brodit 512588 User manual

3 June, 2014, www.brodit.com, © 2014 Brodit AB
Product 512588
512588 Active holder with cig-plug. With tilt swivel. Fits devices with standard and extended battery. With fly
lead.
The active holder charges your battery when it is in the holder. The charging device connects to the PDA
automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in
order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip
Mounting Platform.
EAN: 7320285125889
Item no 512588 fits:
Toughshield R500 (For all countries)
Toughshield R500+ (For all countries)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed
screws.
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until
the holder is firmly in place, but still can be adjusted.
4. The holder is in place.
2(2)