Broyhill A417001900 User manual

ASSEMBLY INSTRUCTIONS
ITEM#: A417001900
SKU# 810499581
BROYHILL ROOM DIVIDER PLANTER
Need help? We are here for you! 1(866)578.6569 24/7 • Toll Free

MAINTENANCE:
WHAT IS COVERED?
The limited warranty is extended to the original purchaser and applies to material and manufacturer’s defect provided
the item is maintained with care and used only for personal, residential purposes.
Warranty:6 Months
WARRANTY:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
• Please read and understand this entire manual before attempting to assemble or install the product.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
• The assembled planters should be located at least 6 feet from any obstruction such as fence, garage, house,
overhanging branches, laundry lines or electrical wires.
• Some parts may contain sharp edges. Wear protective gloves if necessary, during assembly.
• Check all nuts and bolts periodically for tightness and, when required, tighten them again.
• Pay attention to the parts orientation
• Do not assemble the planters on sandy, muddy or loose soil, as stakes do not have enough anchorage in these types
of soil.
• Any assembly or maintenance of the product must be carried out by adults only.
• Please check your state and local regulations prior to purchasing. Some jurisdictions may require permits for installa-
tion and use. Some special procedures may be valid in your area.
• If any scratch paint, please touch up to prevent rusting
• Steel components for this planters are treated with rust inhibiting paint that protects it from rusting. However, due to
the nature of steel, surface oxidation (rusting) will occur if these protective coatings are scratched. This is not a defect
and thus not covered by the warranty.
• To minimize this condition, it is recommended to use care when assembling and handling the product to prevent
scratching the paint. Should any scratching or damage occur, it is recommended to cover the scratch immediately
with rust inhibiting paint (not included).
• Surface rust can also be easily removed with a very light application of regular cooking oil or WD-40. If surface
oxidation (rusting) occurs and if no measure is taken to prevent this, the oxidation may start dripping onto deck or
patio and caused damaging stains, which may be difficult to remove. This can be prevented if the above-mentioned
measures are taken to keep the product from oxidizing.
• Do not use bleach, acid, or other abrasive cleaners on the roof or frame parts.
• Keep instruction manual for future reference.
2/7

EXPLODED DRAWING
3/7

PARTS LIST
HARDWARE LIST
Label Part Number Description Qty Part Image
A P006300098 Middle screen 1
B P006300099 Left screen 1
C P006300100 Right screen 1
D P007600086 Planter pot 7
E P008100015 Plastic Plug
Pre-assembled 6
Label Part Number Description Qty Add Part Image
H1 H010030032 Bolt M6*20 2 1
H2 H050010025 Flat washer
M6 2 1
H3 H090030002 Wrench M6 1 0
4/7

HELPFUL HINTS
• Tools needed and not included
• Separating parts before starting
Provided in hardware pack
How many people needed for the installation work
5/7

STEP 1
Assembled View:
Insert the hinge of Left screen (B) to the
Middle screen (A), Assemble the top
hinge with Bolt(H1) and Flat
washer(H2), tighten with Wrench(HW).
1x
1x
1x
1x
6/7

STEP 2
Assembled View:
1x
1x
1x
Insert the hinge of Right screen (C) to the
Middle screen (A), Assemble the top
hinge with Bolt(H1) and Flat
washer(H2), tighten with Wrench(HW).

Assembled View:
Hang the Planter pot (D) on the screen.
STEP 3
7x
7/7