Broyhill GBO21-602-2 User manual

ASHFORD ALL WEATHER WICKER ARMLESS SOFA
Need help? We are here for you! 1-888-733-8169 Toll Free
Or email us at [e-mail],[e-mail]
[e-mail]
ASSEMBLY INSTRUCTIONS
ITEM# : GBO21-602-2
SKU# : 810493302

Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and safety of your sofa.
In order to prolong the life and beauty of your sofa, we recommend that it be stored in a dry and protected area during off season periods.
Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other solvents on
the frame or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or a commercial foaming upholstery cleaner if necessary.
If washed, rinse well and hang to dry. Do not machine wash or dry.
Well recommend the use of furniture covers when not in use.
Sofa is for sitting purposes only. Standing on or misuse of sofa may result in damage or injury.
Weight limit is 450 lbs ( 204.5 kg). Not intended for commercial use.
MAINTENANCE
Regularly check hardware and tighten if necessary.
Use the correct bolts as indicated. Do not tighten any of the bolts until the sofa is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children and pets away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
WARNINGS:
Use the correct bolts as indicated. All bolts should be hand tighten untill the complete piece is assembled ( This will make the assembly
process much easier ). Once the piece is fully assembled, then go back and tighten all bolts with provided tool.
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
Retain these assembly instructions for future reference.
Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
GENERAL BEST PRACTICE FOR ASSEMBLY:
WARNINGS:
MAINTENANCE:

Part No. Part Qty Image
Part No.
Part Qty Image
1Sofa Back 110 Short Bolt
(M6x15mm) 10
2Sofa Seat Panel 111 Washer 16
6Back Foot 312 Middle Back Cushion 1
7Front Foot 213 Side Back Cushion 2
8Long Bolt
(M6x41mm) 214 Seat Cushion 1
9Middle Bolt
(M6x36mm) 615 U - shape Connection
Lock 2
Tools
PARTS LIST
Note: There are 2 pc PART 8 long bolt to match PART 15 U - shape connection lock.
No washer is needed for this two.
PARTS LIST FOR CORNER SOFA:

PART REQUIRED: 2, 6 & 7
Keep the bolts loose.
STEP 1 STEP 1
X10 X10
PRODUCT FRAME MAP
11
1
2
6
77
6
6
10
11
10
2
6
7
6
6
7

PART REQUIRED: 12, 13 & 14
Finished!
STEP 3
STEP 2
PART REQUIRED: 1, 2, 6 & 7
Keep the bolts loose.
STEP 2
x6 X6
STEP 3
11
9
11
9
1
2
77
66
6
13
12
14
13