Buhler Swath Roller FK358 Product manual

Swath Roller
TABLE OF CONTENTS
DESCRIPTION PAGE NUMBER
Warranty......................................................... 1
Operation........................................................ 2
General Safety................................................ 3
Assembly........................................................ 3
8’ Swath Roller Drawing ............................... 4
8’ Swath Roller Parts List................................ 5
10’ Swath Roller Drawing ............................. 7
10’ Swath Roller Parts List........................7 & 8
Shipping Bundles............................................ 9

Swath Roller
1
WARRANTY POLICY
Buhler Manufacturing products are warranted for a period of twelve (12) months (90 days for
commercial application) from original date of purchase, by original purchaser, to be free from
defects in material and workmanship under correct, normal agricultural use and proper
applications.
Buhler Manufacturing’s obligations under this warranty shall be limited to the repair or
exchange, at Buhler Manufacturing’s option, of any Buhler Manufacturing product or part which
proves to be defective as provided. Buhler Manufacturing reserves the right to either inspect
the product at the buyer’s location or have it returned to the factory for inspection.
The above warranty does not extend to goods damaged or subject to accident, abuse or misuse
after shipment from Buhler Manufacturing’s factory, nor to goods altered or repaired by anyone
other than an authorized Buhler Manufacturing representative.
Buhler Manufacturing makes no Express Warranties other than those, which are specifically
described. Any description of goods, including any references and specifications in catalogues,
circulars and other written material published, is for the sole purpose of identifying goods and
shall conform to such descriptions. Any sample or model is for illustrative purposes only and
does not create an Express Warranty that the goods conform to sample or model shown.
The purchaser is solely responsible for determining suitability of goods sold. This warranty is
expressly in lieu of all other warranties expressed or implied. Buhler Manufacturing will in no
event be liable for any incidental or consequential damages whatsoever. Nor for any sum in
excess of the price received for the goods for which liability is claimed.
WARRANTY CLAIMS:
Warranty requests must be prepared on Buhler Manufacturing Warranty Claim Forms with all
requested information properly completed. Warranty Claims must be submitted within a thirty
(30) day period from date of failure repair.
WARRANTY LABOR:
Any labor subject to warranty must be authorized by Buhler Manufacturing. The labor rate for
replacing defective parts, where applicable, will be credited at 100% of the dealer’s posted shop
rate. Defective parts will receive an extra 10% discount to assist with freight or other incidental
costs.
GOVERNMENT LEGISLATION:
Warranty terms and conditions are subject to Provincial or State legislation.
IMPORTANT FACTS:
Buckets and Bucket Tines Carry No Warranty
Bent Spears Carry No Warranty
Snowblower Fan Shafts Carry No Warranty
Mower Blades Carry No Warranty
Portable Auger Parts Have Two (2) Year Warranty
Loader Parts Have Two (2) Year Warranty
IMPORTANT NOTE: This warranty does not apply to rentals

Swath Roller
2
SWATH ROLLER
OPERATION
This machine is available in two sizes: Approximately eight feet wide and
approximately 10 feet wide. The 8 foot drum is made of 16 gauge steel. The 10 foot
drum is made of 14 gauge steel and has an extra set of braces for the hitch. Frame
sides have a threaded crank to adjust the drum height. Wheels are standard
15 inch with four bolt hubs.

Swath Roller
3
GENERAL SAFETY
1. Stop engine, set brake and remove ignition key before:
- connecting or disconnecting.
- servicing or making adjustments.
2. Do not allow riders.
3. Clear the area of people and foreign objects before starting the swather.
4. Use hazard warning lights and a SMV sign when transporting.
ASSEMBLY
1. Center the drum shaft (#2) in the drum (#1) and tighten in place using
the set screws supplied in the hubs at the ends of the drum.
2. Slide the right and left side frames (#7) and (#8) onto the drum shaft
with the side frames turned as shown in drawing.
3. Assemble the cross brace (#3) between the two side frames. Do not
tighten the clamp bolts until after the bearings on the side frames
have the collars locked in place. NOTE: When mounting bearings on a shaft,
always tighten the bearing collar in the direction of shaft rotation using a
center punch or a similar tool.
4. Clamp the hitch (#4) to the center of the cross brace.
ALERT: The 10’ Swath Roller has two additional braces (#31)
clamped to both sides of the hitch.

Swath Roller
4
8’ SWATH ROLLER

Swath Roller
5
WHEN ORDERING PARTS
Always give your dealer the Model, Color and Serial Number of your machine to assist
him in ordering and obtaining the correct parts. Use the exploded view and tabular
listing of the area of interest to exactly identify the required part.
8' SWATH ROLLER
ITEM PART # DESCRIPTION
1 F6500 Drum Weldment
2 967501 Drum Shaft Weldment
3 967585 Cross-Brace
4 967590 Hitch Weldment
5 967504 Hitch Clamp (20")
6 967505 Crank Weldment
7 967587 Right Side Frame
8 967588 Left Side Frame
9 967508 Slider Bracket Weldment
10 961792 Housing W/Bearing Pillow
11 81599 7/16" x 1 1/2" Hex Bolt (pl)
12 981616 7/16" Flat Washer (pl)
13 81615 7/16" Lock Washer (pl)
14 81614 7/16" Hex Nut (pl)
15 812338 7/16" x 3" Hex Bolt (pl)
16 86273 7/16" Lock Nut (pl)
17 961891 Oil Seal (SE11)
18 967712 Inner Bearing Cone (LM67048)
19 967711 Inner Bearing Cup (LM67010)
20 105173 4-Bolt Hub W/Cups
21 968404 1/2" Wheel Bolt
22 968405 Outer Bearing Cup (LM11910)
23 968406 Outer Bearing Cone (LM11949)
24 9812416 Washer (3/4" S.A.E.) (pl)
25 81834 3/4" Slotted Hex Nut (br)
26 9812486 1/8" x 1 1/2" Cotter Pin
27 968409 Dust Cap (DC12)
28 9105173 H411 Hub Assembly
29 81213 3/8" x 1" Sq. Hd. Set Screw (pl)
30 967246 5/8" Square Nut (pl)
31 901005 Hitch Clevis

Swath Roller
6
32 901078 Clevis Pin 3/4" x 3 1/2"
33 900368 SMV Mounting Bracket
34 84050 3/4" S.A.E. Flat Washer (pl)
35 9812433 3/16" x 1 1/2" Cotter Pin (pl)
36 812026 5/16" x 1" Hex Bolt (pl)
37 81568 5/16" Hex Nut (pl)
38 81569 5/16" Lock Washer (pl)
39 81598 7/16" x 1 1/4" Hex Bolt (pl)
40 967900 1/4" Grease Fitting
41 81592 3/8" Hex Nut (pl)
42 F7110 15" x 4.5" x 4-Bolt Wheel

Swath Roller
7
10’ SWATH ROLLER
10' SWATH ROLLER
ITEM PART # DESCRIPTION
1 F6551 Drum Weldment
2 967577 Drum Shaft Weldment
3 967589 Cross-Brace
4 967579 Hitch Weldment
5 967504 Hitch Clamp
6 967505 Crank

Swath Roller
8
7 901146 Right Side Frame
8 901147 Left Side Frame
9 967508 Slider Bracket
10 961792 1" Pillow Bearing
11 81599 7/16" x 1 1/2" Hex Bolt (pl)
12 981616 7/16" BS Flat Washer (pl)
13 81615 7/16" Lock Washer (pl)
14 81614 7/16" Hex Nut (pl)
15 812338 7/16" x 3" Hex Bolt (pl)
16 86273 7/16" Lock Nut (pl)
17 961891 Oil Seal (SE11)
18 967712 Inner Bearing Cone (LM67048)
19 967711 Inner Bearing Cup (LM67010)
20 105173 4-Bolt Hub W/Cups
21 968404 1/2" Wheel Bolt
22 968405 Outer Bearing Cup (LM11910)
23 968406 Outer Bearing Cone (LM11949)
24 9812416 Washer (3/4" S.A.E.)
25 81834 3/4" Slotted Hex Nut (br)
26 9812486 1/8" x 1 1/2" Cotter Pin
27 968409 Dust Cap (DC12)
28 9105173 H411 Hub Assembly
29 81213 3/8" x 1" Sq. Hd. Set Screw (pl)
30 967246 5/8" Square Nut (pl)
31 967580 Hitch Brace
32 967581 6" Clamp
33 901005 Hitch Clevis
34 901078 Clevis Pin 3/4" x 3 1/2"
35 900368 SMV Mounting Bracket
36 84050 3/4" S.A.E. Flat Washer (pl)
37 9812433 3/16" x 1 1/2" Cotter Pin (pl)
38 812026 5/16" x 1" Hex Bolt (pl)
39 81568 5/16" Hex Nut (pl)
40 81569 5/16" Lock Washer (pl)
41 81598 7/16" x 1 1/4" Hex Bolt (pl)
42 967900 1/4" Grease Fitting
43 81592 3/8" Hex Nut (pl)
44 F7110 15" x 4.5" x 4-Bolt Wheel

Swath Roller
9
SWATH ROLLER SHIPPING BUNDLES
QUANTITY BUNDLE NUMBER DESCRIPTION
8’ SWATH ROLLER: C800SR
1 F6500 Drum Weldment
1 F6620 Frame Bundle
1 F6622 Hitch, Shaft, Brace Bundle
2 F7110 Wheel 15”
10’ SWATH ROLLER: C1000SR
1 F6551 Drum Weldment
1 F6625 Hitch, Shaft, Brace Bundle
1 F6626 Frame Bundle
2 F7110 Wheel 15”

NOTES

NOTES

Buhler Manufacturing “a partnership”
301 Mountain Street S.
Morden MB.
R6M 1X7
Ph.: [phone]
Fax: [phone]
www.buhler.com
Printed in Canada
Farm King Division
301 Mountain Street S.
Morden, MB R6M 1X7
Ph.: [phone]
Fax: [phone]
Allied Division
1201 Regent Ave. W.
Box 1003
Winnipeg, MB R2C 3B2
Ph.: [phone]
Fax: [phone]
Inland Division
675 Washington Ave.
Winnipeg, MB R2K 1M4
Ph: [phone]
Fax: [phone]
B.I.I. Division
1330 43rd Street N.W.
Fargo, ND 58102
Ph: [phone]
Fax: [phone]
B.C., Abbotsford
[phone]
AB, Edmonton
[phone]
SK, Regina
[phone]
ON, Woodstock
[phone]
ON, Jasper
[phone]
QC, Dorion
[phone]
AR, West Memphis
[phone]
GA, Stone Mountain
[phone]
IA, Lakeview
[phone]
ID, Meridian
[phone]
IN, Clarksville
[phone]
KS, Wichita
[phone]
MN, Lakeville
[phone]
MT, Billings
[phone]
Burando Hill
Katanning
W. Australia
011-618-98-214422
Chihuahua, Mexico
011-52-158-90306
ND, Bismarck
[phone]
ND, Fargo
[phone]
NY, Syracuse
[phone]
OH, Youngstown
[phone]
OR, Portland
[phone]
SD, Huron
[phone]
TX, Houston
[phone]
UT, Salt Lake City
[phone]
WI, Portage
[phone]
John Kerr Equipment Ltd.
Wilcoxholm Farm
Linlithgow, W. Lothian
Scotland
011-441-506-842280
Skovde, Sweden
011-46-500-452651
Naestved, Denmark
011-45-557-29511
CANADIAN WAREHOUSES
U.S. WAREHOUSES
OFFSHORE WARE
HOUSES
DIVISION LOCATIONS