Bultaco brinco User manual

THE ELECTRIC MOTO-BIKE
USER MANUAL

23
© 2017/2018 Bultaco Motors S.L. , Madrid, Spain.
All rights reserved.
Printing and full or partial reproduction is prohibited
without written permission from Bultaco Motors S.L.
First of all, thank you for buying a Brinco. We are proud to have
your confidence. The new Brinco is a new, reaching and oering
concept, the Moto-Bike that you will enjoy in a way you have
never dreamed of before.
For Bultaco innovation is not only to reach new technological
goals, but also to oer new experiences. And Brinco is something
completely new; it is the result of wanting to transport the
Bultaco spirit to a new era, with a new language, whilst always
being loyal to the classic brand values: passion, innovation,
competition.
With Brinco, Bultaco proposes a whole new way to understand
and live the two wheels. A striking combination between the
worlds of the motorcycle and the bicycle: electric propulsion
and the physical experience of pedaling, independently, or by
combining the two systems. You decide at every moment how
to maximise the perfect symbiosis between the handlebar and
the pedals.
Whether for short or medium distances, the Brinco is above all
a friend like no other, for fun, games and for getting away from it
all. Because Bultaco Brinco will take you where you want, where
your heart desires, further and faster than where your legs alone
would be able to go.
The Welcome Kit of your new Brinco contains the items listed
below:
Welcome
bultaquista
Bultaco Battery Charger
(Check the Manual)
Master Key Cards
(marked with a yellow sticker)
Brinco Keyless Wristband
Bultaco Tool kit
(includes keys to disassemble
battery and rear wheel)

45
Important
Below you can find the most important information to enjoy your Brinco.
We recommend you to read this user manual carefully before using your
Brinco for the first time and consult it again every time you have any
problems or questions.
Your Brinco is a powerful and fun vehicle that can be used in many
ways. Mishandling it may cause danger to life, health and possible risk
of serious injury. Always ride with caution, using a helmet, gloves and
protective clothing.
Be aware that you will be moving in a fast and quiet vehicle, so be careful
with people and animals around you.
In this manual we will give you advice and warnings so you can take full
advantage of your Brinco and keep it as good as new. That is why we
recommend using original parts /accessories and getting them fitted at
a Bultaco Motors Ocial Dealer or Ocial Service.
You must pay very close attention to our safety warnings, because we
consider them essential to prevent falls and injuries.
If after reading this manual you have any doubts or need further information,
please contact your Bultaco Motors Ocial Dealer or Ocial Service.
This user manual:
- Contains important technical and safety information.
- generally describes the most important features of your Bultaco.
- It is intended for private users, and is not prepared for use by
professional sta.
- Reflects the version described at the time of printing, so there may be
small dierences, due to the continuous improvement of our Bultaco
products.
All information in this manual is non-binding. Bultaco Motors S.L.
reserves the right to:
- Introduce, without notice and without disclosing the reasons, changes in
the technical data, maintenance services, colors, design, equipment
and the vehicle materials.
- Adapt their vehicles to local conditions in certain markets and to stop
production of a particular model without prior notice.
Bultaco Motors S.L. assumes no liability in connection with diculties
in the availability of vehicles, with dierences between images or
descriptions and the particular vehicle, nor errors or omissions in this
manual. The models portrayed partly contain special equipment which
is not standard.
USER MANUAL
2nd. Edition, June 2017
WARNING
CHANGES MADE TO THE VEHICLE MAY AFFECT YOUR
SECURITY AND PRODUCE INJURIES TO PEOPLE.
Any modification made to the vehicle without Bultaco Motors
S.L.’s approval will have the following eects:
- Loss of warranty rights granted by the manufacturer.
- Possible need to obtain another driving licence.
- Risk of accidents and serious injuries.
INFORMATION
BEFORE USING YOUR BRINCO PLEASE CHECK ANY LOCAL
REGULATIONS RELATED TO THE USE OF ELECTRICAL
AND MOTOR VEHICLES.
THE BRINCO R, AS IT DOES NOT HAVE THE REQUIRED
APPROVAL FOR CIRCULATION, IS NOT SUITABLE FOR
USE ON PUBLIC ROADS.
Contact one of our Bultaco Motors Ocial Dealer if you have
any questions.
For your information, the applicable laws may include some of
the following items:
- Age requirement for vehicle use.
- Equipment required to travel on certain roads.
- Need for a special licence to use the vehicle.
- Areas of restricted use for the vehicle.
If you wish to have a printed version, please ask it to your
Bultaco Motors Ocial Dealer.
LEGAL PROVISIONS
This manual contains images with informational purposes and may not reflect reality.

7
3.3. Starting card / Wristband copy 46
3.3.1 Starting card / Wristband copy 48
3.4. During the ride 49
3.5. Gear shift / Transmission 50
3.6. Stopping your Brinco 51
3.7. Instructions for Use 52
3.8. Directions for Parking 54
4. MAINTENANCE
4.1. Adjusting the Rear Suspension: Shock Absorber 56
4.2. Adjusting the Front Suspension: Fork 58
4.3. Brakes 60
4.4. Wheels and Tyres 63
4.5. Transmission: Chain and Bottom Bracket 68
4.6. Cleaning 69
4.7. Torque Settings 70
4.8. Maintenance Table 71
5. TROUBLESHOOTING
5.1. Troubleshooting 74
INDEX
1. GENERAL SAFETY
1.1. General warnings 10
1.2. Operational Safety 11
1.3. Warnings 12
1.4. Power Components’ location 16
2. VEHICLE DESCRIPTION
2.1. Presentation 20
2.2. Components’ location 22
2.3. Handlebar Controls 24
2.4. Dashboard 26
2.5. Dashboard Configuration 28
2.6. Power Control Button 30
2.7. Identification Numbers 31
2.8. Technical specifications 32
2.9. Dimensions 34
3. GENERAL OPERATION
3.1. Prior Checks 38
3.2. Battery Charge 40
3.2.1. Removing the Battery 40
3.2.2. Charging the Battery 42

9
1. GENERAL SAFETY

10 11
You are the only person responsible for the use of this motorbike. Do not allow other
people to ride the vehicle without having received appropriate instructions and/or reading
this manual. Remember that neither the seller of this Brinco nor Bultaco Motors S.L. can
be hold responsible for the misuse or negligence when using the Brinco.
Your Brinco is not a competition vehicle and it is not designed for such use. Thus, its use in
competition will mean the loss of the warranty provided by Bultaco Motors S.L.
Follow the inspection and maintenance periods indicated here, that along with good riding
technique will help you to enjoy your Binco safely and reliably. Make sure you understand
the importance of checking all vehicle components carefully before riding.
Before each ride, you should check the condition of the vehicle in accordance with section
3.1 as well as the battery charge level and connection.
Remember that the power components of your Brinco should be handled only by Bultaco
Motors S.L. [See section 1.4.].
Throughout these instructions you will find dierent types of indications. The symbols
used are described in the next section.
With these symbols we are letting you know that if if you do not follow them or comply
with them, you will not be using your Brinco correctly or it may not work properly.
Remember that, in addition to the loss of warranty, you will endanger yourself and other
people around you. Remember check warnings. [See section 1.3.]
INDICATES THE EXISTENCE OF
POSSIBLE DANGERS TO THE VEHICLE
OR OTHER PARTIES.
WARNS OF HEALTH HAZARD AND
POSSIBLE RISKS OF SERIOUS INJURY.
INDICATES THE EXISTENCE OF USEFUL
TIPS AND SPECIAL INFORMATION.
1.1. General Warning
Listed below are several things to keep in mind regarding the operation of the vehicle:
Whenever you do not use your Brinco, put the engine stop
button in the OFF position [See section 2..3]. It is easy to
forget when it is on and an accident could occur when getting
on or o the bike.
Similarly, to move the vehicle without riding it, make sure the
engine stop button is in the OFF position [See section 2.3.].
In order to optimize the battery life and safety, when the
Brinco is not in use for more than 90 days, we recommend:
-. Charge the battery up to 80% (or more).
-. After charging, disconnect the battery from the battery
charger and the Brinco.
-. If exceeding 90 days of storage with the battery
disconnected, please connect it to the charger and
charge it up to 80% again.
-. Leave the battery in a safety place, at room temperature,
dry and apart from direct sunshine or any other heat
source.
In case you want to achieve maximum performance of the
Brinco, we recommend you to charge the battery prior to
the ride.
Maximum battery performance will not be achieved until you
have made at least 5 cycles of charge and discharge.
If you do not follow the instructions for charging and storing
the battery described in these operating instructions you will
lose the warranty on it. These guidelines have been rigorously
tested to ensure maximum eciency and durability of the
battery.
1.2. Operational Safety
IF ANY ABNORMALITY DAMAGE ON THE BATTERY IS DETECTED, PLEASE
CONTACT YOUR BULTACO MOTORS OFFICIAL DISTRIBUTOR.
FOLLOW THE INSTRUCTIONS FOR BATTERY CHARGING AND
STORAGE.

12 13
BATTERY AND CHARGER
Do not handle the battery.
Never leave the battery or any electrical components near heat
sources.
Keep this and any other battery out of the reach of children and
/ or pets.
Do not dispose of the battery in any container. Check your local
recycling point. If in doubt, contact a Bultaco Motors Ocial
Service to provide you with the necessary information for recycling.
The IEB charger has its own User Manual with instructions for storage,
use and maintenance. You can find it inside the Wellcome Kit.
Do not use the charger if any part of it is damaged.
Do not open or remove the charger cover. Repairing and / or
handling may only be carried out by qualified personnel.
The use of extension cords, multiple plugs and sockets, surge
protectors or similar devices may increase the risk of electric shock
and other hazards. Do not use this type of device with charger.
Using the charger with a damaged or worn AC outlet may result
in burns or fire. Periodically check the plug to the AC outlet and
charger while charging. If the plug is heated, disconnect the charger
and have a qualified electrician replace the AC outlet.
Replace the charger if the plug for the AC outlet or the cord is
dama-ged. You must go to a Bultaco Motors Ocial Service.
Do not use a portable or fixed generator to load the Moto-Bike. It
can damage the charging system of the Moto-Bike, which should
only be charged with the power supplied by the power grid.
The AC outlet must have a grounded connection and will be
of exclusive use. Cannot be other large electrical appliances
connected to the same circuit. If it is not a dedicated circuit, it could
exceed the current of the circuit breaker in the outlet and cause it
to jump or to open.
If you manipulate any electrical component of your Moto-Bike,
there is a risk of electric shock which can lead to personal or even
fatal injury.
Never open the battery nor the charger.
Do not destroy the battery or immerse it in any liquid.
Do not let the battery to fall dawn (if this happens, as well as
a possible fall of the Moto-Bike, please check if the battery has
any external damage. If it is not working properly, it switches o
prematurely or overheats, please proceed to your Ocial Service.
Do not use it nor charge it again. In this case do not storage it inside.
1.3. Warnings
Manufacturer’s web Charger’s web User manual
TIRES
Front and rear tires must be of the same brand, design and
measurements; otherwise, the characteristics of the vehicle may
be dierent and could cause an accident.
If you drive with incorrect tire pressure you can lose control,
resulting in serious personal injury or fatal accident.
Tire pressure must be checked and adjusted with cold tires (when
the tire temperature equals ambient temperature).
If tires are excessively worn, have them changed at a Bultaco
Motors Ocial Distributor or Service. The use of the vehicle with
excessively worn tires is illegal, reduces stability and you can lose
control.
Drive at moderate speeds after changing a tire, A new tire must
allowed time to bed in, before its optimum characteristics are
available.
BRAKES
The malfunction of the brake lever indicates a danger condition
in the brake system. Do not use the Moto-Bike until a Bultaco
Motors Ocial Service has checked or repaired the brake system.
TRANSMISSION
The transmission chain should be lubricated periodically, after
washing the Moto-Bike or using it in rainy or wet areas.
DRIVING AND TRANSPORTATION
The maximum authorized weight to your Moto-Bike is 100 kg
(passenger + luggage) and 142 kg (Moto-Bike + passenger +
luggage).
This Moto-Bike is designed for a driver. Do not exceed the
maximum authorized weight.
This Moto-Bike is not designed to have a child chair pero sí
luggage rack. If you wish to add any accessory to it, please ask your
Bultaco Motors Oficial Distributor.
This Moto-Bike is not designed to tow a trailer or attach a sidecar.
This Moto-Bike is not designed for extreme use.
Do not immerse this Moto-Bike in rivers, lakes, marshes or a large
body of water.
Do not drive the Moto-Bike with the side stand lowered or if it
cannot be raised correctly, otherwise the side stand may touch the
ground, with the risk of losing control. Therefore, check this system
regularly and if it does not work properly, repair it at a Bultaco
Motors Ocial Service.
If you do not become familiar with the controls you can lose
control, with the consequent risk of accident or personal injury.
This Moto-Bike must be moved on a platform. It cannot be towed
or pushed from vehicle to vehicle.

14 15
An incorrect transport of the Moto-Bike may cause damage. If the
Moto-Bike is damaged, id should be carried on a platform.
The original Moto-Bike, driver and accessories can never exceed
the maximum authorized weight.
No animal can be transported.
Never overload the vehicle. Overloaded vehicle could cause an
accident.
Make sure your Moto-Bike including the original accessories does
not exceed the maximum authorized weight.
Make sure the vehicle load is properly secured. Items may be
thrown and cause personal injury or damage to the vehicle.
CLEANING AND MAINTENANCE
Before cleaning the Moto-Bike ask your Bultaco Motors Ocial
Distributor or Service. If you use a brush, chemicals or strong
detergents to clean it, the parts will scratch or damage. Also, avoid
applying wax to the outer parts.
Do not use wheel cleaners with high acid content. If you use these
products, do not leave the cleaner on the aected area for longer
than indicated in the instructions. Also rinse the area thoroughly
with water, dry it immediately.
Improper cleaning can damage plastic parts. For cleaning the
plastic use only a soft clean cloth or a sponge with water. However,
if the plastic parts are not cleaned well with water, a mild detergent
can be diluted in it. All detergent residue must be removed with
plenty of water, as this is detrimental to plastic parts.
Do not use chemicals products for plastic parts. Do not use
cloths or sponges that have been in contact with strong or abrasive
cleaners, solvents or thinners, fuel (gasoline), dexosidants or
antioxidants, brake fluid, antifreeze or electrolyte.
Do not use pressure washers or steam cleaners, water could
enter and deteriorate elements or electrical components of the
Moto-Bike.
If the service maintenance is not carried out or if it is performed
incorrectly, it can increase the risk of personal injury or a fatal
accident during the maintenance or use of the Moto-Bike.
Always perform the service maintenance of your Moto-Bike in a
Bultaco Motors Ocial Service.
If you do not have the original tools or experience to perform a
particular job, you should give it to a Bultaco Motors Ocial
Service.
Turn o the Moto-Bike and disconnect the battery for any
maintenance work. With the engine running, moving parts can
damage parts of the body and electrical components can cause
shock, eye injury, burns or fire.
If you notice any damage to the front fork or it does not work
smoothly, it must be checked or repaired by a Bultaco Motors
Ocial Service.
To avoid personal injury or damage in the Moto-Bike, firmly
support the vehicle.
To avoid damage or fire on the electrical system, do not use a
fuse with higher amperage than recommended. To repair it you
must go to a Bultaco Motors Ocial Service.
Avoid damaging the headlight optics: Do not stick any colored
film or adhesives on the headlight optics.
Do not handle any electrical component.
This Moto-Bike is designed to use Ocial Bultaco Motors
accessories and spare parts only.
If you suer any damage contact the emergency services in
your country.
Please follow every indication and make the recommended
mantenance.If you do not follow them, you may lose your warranty.
Pay special attention to every warning described in the manual
with the symbol , it will avoid personal fatal damage and assure
the good functioning of your Moto-Bike.
In case of fire (on the vehicle or near it), immediately contact
the firefighters and inform them that the fire is on/near a
vehicle that contains Ion Lithium batteries.
Do not approach the vehicle if it is on fire. The cells could be
projected due to the fire.

16
The power components handle voltages up to 59V that can be health hazards and
potential risks of serious injury:
Their handling (except for assembly / disassembly and charging the battery and engine
disconnection to handle the rear wheel) must only be carried out by a Bultaco Motors
Ocial Service.
Any damage to any of the power components must be repaired immediately by a Bultaco
Motors Ocial Service.
POWER PARTS WILL REMAIN ACTIVE
FOR A PERIOD OF TIME AFTER THE
VEHICLE HAS BEEN SWITCHED OFF.
NEVER CUT WIRES OR HANDLE THE
POWER COMPONENTS.
1.3. Power Components’ location
Power zones

2.VEHICLE DESCRIPTION

20
The Bultaco Brinco surprises with its innovative design,
technology and the eectiveness of each of its elements. The
Bultaco engineering and design teams have worked together to
create the first Moto-Bike with a spectacular, very sporty and
beautiful result.
From the first time you see a Bultaco Brinco it is clear that it
is something new and uncomparable to everything we knew
before. Its features might ressemble those of a competition
mountain bike, a dirt bike, a crossbike or an urban trail bike, but
its design and the engineering solutions that define it reveal it
as a special machine that exceeds the established labels.
Brinco opens the door to multiple riding choices, oering
everyone the opportunity to decide how “to equalise” the best
motor/pedal combination for their Brinco under every situation:
engine, independent pedaling or a combination of both.
Thanks to its impressive torque of 60Nm, weighing just 39 kg.
and with a range of up to 100 km, the Brinco oers pure fun.
Brinco is 100% Bultaco enthusiasm for all ages. Brinco is
hyperlight, hyperconnected and hyperfun.
2.1. Presentation

22 23
5
6
7
4
9
10
11
12
17
15
14
16
8
1
2
Three-phase Permanent Magnet Motor
[See section 2.8.]
Mudguard
Reflective parts
Rear Light
License plate holder
Rear shifter
To prevent the deralleur from coming loose always lean on
its left side.
Planetary gearbox
[See section 3.5.]
Possibility of Change: Overdrive - Low Range Gearbox (2)
by touching the button located at the base of the rod: By
pressing it with the right foot it changes to the gear ratio of
higher speed.
DC / AC Three Phase Controller
[See section 2.8.]
Retractable side stand
Power Cell Li-Ion Matrix Battery
[See section 3.2.]
Battery Connector
[See section 3.2.1.]
Disconnect your battery power system quickly with a simple
twist of the connector in a counterclockwise direction.
Battery safety lock
[See section 3.2.1.]
The battery has a single key safety lock for each vehicle. The
battery will be attached to the chassis and the key is required
to remove it.
Rear suspension adjustment
[See section 4.1.]
Front suspension adjustment
[See section 4.2.]
Front Light
Check proper operation before starting to drive.
Rear side mirror
Check proper operation before starting to drive.
Horn
Seat Adjustment
[See section 2.9.]
With the standard sub-chassis, the seat can reach a
minimum height of 1 metre from the ground (cutting the seat
bar). There is also the option to purchase a Low Seat sub-
chassis that allows you to further reduce the seat height. Ask
to your Bultaco Motors Ocial Distributor.
2.2. Location of Components
5
6
9
10
11
12
13
14
15
16
17
18
7
8
1
2
3
4
3
18
13
Specific element for homologated version.

24 25
2.3. Handlebar Controls
Dashboard
Horn Control
Rear side mirror
Check proper operation before starting to drive.
Front brake lever
[See section 4.3.]
Check the brake position properly. The front brake lever is
on the right handlebar grip.
Rear brake lever
[See section 4.3.]
Check the brake position properly. The rear brake lever is on
the left handlebar grip.
Throttle control
Always make sure that the accelerator returns correctly
to its initial position when you release it after accelerating
before switching ON your Brinco.
Stop button
[See section 3.3.]
Always check that the vehicle is turned o after use.
Button in OFF position.
Power Control Button
[See section 2.6.]
It allows you to select and set a cruise power level so that
constant electric power is used without operating the
throttle.
Shifter
[See section3.5.]
9-speed gear ratio.
5
6
9
7
8
1
2
3
4
5
6
7
4
2
1
3
98Specific element for homologated version.

26 27
Speedometer (km/h - mph)
[See section 2.5.]
Driving mode. ECO - SPORT - TOUR
[See section 2.5.]
On the right of the mode the instantaneous power is shown
in W.
Battery Level
When the battery level falls below 2 bars (25% battery), the
low battery indicator will be shown.
Odometer / Trip
[See section 2.5.]
In-use Indicator
Will be alight when the Brinco is powered on.
Low battery Indicator
Will be alight when 2 or less battery bars are displayed.
Warning Indicator
[See section 2.5.]
This light flashes when you turn on your Brinco and testing
is being performed. Once testing has finished, the light will
remain on until the motorbike is put in driving position (and
the power button is ON).
Normally, the light will be o. If this light is on it will mean
that something on your Brinco is not working properly, that
it is in self-protection mode or that a system failure has
been detected.
MODE Function
[See section 2.5.]
SET Function
[See section 2.5.]
NFC Antenna to lock/unlock your Brinco
The antenna is connected to the “Biker Manager”, a system
to start the vehicle by means of a pilot wristband/card.
2.4. Dashboard
WHENEVER THE DASHBOARD IS ILLUMINATED
YOUR BRINCO WILL BE ON BUT IT ONLY
WILL BE IN RUNNING CONDITION WHEN THE
STOP BUTTON IS ON.
5
6
9
10
7
8
1
2
3
4
5
6
9
10
7
8
12
3
4

28 29
2.5. Dashboard Configuration
COMMUTATION KM/H - MPH CHANGING DRIVING MODE
Press the “MODE”
and “SET” buttons
simultaneously for more
than 4 seconds.
The riding mode when starting the vehicle will be ECO by
default.
The riding mode can be changed by pressing shortly the
“MODE” button.
The viability of the mode change takes into account the
following parameters:
- Battery level between 2 bars (25%) - 8 bars (100%)
Possible changes
- Battery level from 1 bar (11%) - 2 bars (25%)
It allows change from E C O --- a ---> TOUR
- Battery level between 0 bars (0%) - 1 bars (11%)
Allows ECO mode only
The measurement unit will
change automatically.
E C O --- t o ---> TOUR
TO U R --- t o ---> SPORT
S P O R T --- t o ---> ECO
SPORT MODETOUR MODEECO MODE
ODOMETER - TRIP 1- TRIP 2 SUMMARY OF FEATURES
This option can be changed by pressing the “MODE” button
for more than 4 seconds until the display shows ODO –
TRIP1 – TRIP2.
The TRIP can be reset once selected by pressing the “SET”
button for more than 2 seconds.
DASHBOARD BUTTONS
Display
Long press
“MODE”
(4 sec.)
Short press
“MODE”
Long press
“SET”
(2 sec.)
Long press
“MODE”
& “SET”
ODO TRIP 1
Change
driving
mode
-
Change
measurements
units
TRIP 1 TRIP 2 TRIP 1
reset
TRIP 2 ODO TRIP 2
reset

30 31
The Power Control button [See section 2.3] allows you to select and maintain the
same level of power during your ride.
To use the power button, you accelerate to achieve the desired power level (you can
check its value on the dashboard) and then press the Power Control button to maintain
that power level.
Once this is done you can stop accelerating and the vehicle will continue its ride at the
desired power.
To turn o Power Control you just need to press any brake lever or press the “Power
Control” button again.
When in the Power Control mode you can accelerate to exceed the value of cruising
power if necessary.
In normal riding mode (with Power Control o), you can view the instantaneous power
level on the display, on the right of the driving mode (“POT” in the image shown).
Once the cruise power is selected it will be set and displayed on the dashboard display
until Power Control is turned o.
2.6. Using the POWER CONTROL Button
POWER CONTROL WILL BE
DEACTIVATED BY:
- PUSHING THE POWER
CONTROL BUTTON
- PRESSING ANY OF THE
BRAKE LEVERS
RIDE WITH EXTREME CAUTION WHENEVER POWER CONTROL IS ON.
2.7. Identification Numbers
Vehicle Identification Number VIN (Serial number)
The VIN is a 17 digit code that is printed on the right side of
the steering tube.
Battery Identification Number
On the lower side of the battery there is a warranty seal
with safety instructions and its identification number.
Controller Identification Number
The controller identification number is engraved on the
chassis aluminum support plate.
Engine Identification Number
The engine identification number is engraved on the left
side of the engine.
DO NOT CHANGE ANY OF THE IDENTIFICATION NUMBERS OF
YOUR BRINCO NOR BREAK THEIR SAFETY SEALS, OTHERWISE YOU
WILL LOSE YOUR WARRANTY.
1
1
2
2
3
3
4
4

32 33
BRINCO R BRINCO R-E BRINCO C BRINCO S
Motor
Brushless / Permanent magnets / AC / On rear wheel
Built-in self-protection and diagnostic system
Max. Power 2 kW
Controller
3 Riding Maps
(Sport – Tour – Eco)
Max. Speed.: 60 km/h
3 Riding Maps (Sport – Tour – Eco) “45 Version” Max. Speed: 45 km/h
2 Riding Maps (Tour – Eco) “25 Version” Max. Speed: 25 km/h
Battery CAPACITY: 1.3 kWh / CELLS: High durability Lithium-Ion / BMS (Battery Management System) CAN Bus / INPUT: 58,8V
Charger O Board @8A 465W / INPUT: 110 VAC - 240 VAC / OUPTUT: 58,1 VDC / WEIGHT: 1,5Kg / CHARGE TIME: 3h (95%)
Transmission 9 Gears + Overdrive (ratio 1 : 1.65) / Plate Z34 9 Gears
Connectivity NFC Keyless. DISPLAY: Blacklit digital / DIAGNOSIS: CAN Bus
Chassis Aluminum central tube frame and swingarm
Kickstand - SIDE
Front suspension
Adjustable inverted fork
180 mm 130 mm
Rear suspension
Adjustable monoshock (compression / extension and preloading)
217 mm (Yellow Spring) 150 mm (Black Spring)
2.8. Technical Specifications
BRINCO R BRINCO R-E BRINCO C BRINCO S
Handlebars Sport – 760 mm Touring – 730 mm
Front brakes Hydraulic - Disk Ø 203 mm, with 4-piston caliper (integrated switch normally open)
Rear brakes Hydraulic - Disk Ø 203 mm, with 2-piston caliper (integrated switch normally open)
Front wheel
RIM: O-Road 24’’ / TIRE: 24 x 3’’ (O-Road) RIM: Touring 24’’
TIRE: 24 x 2,35’’ (road)
Rear wheel
Front light - M99 Pure+ 1.100 Lumen / 200 Lux and Automatic Sensor (day / night)
Tail light - LED (Position - Brake)
Pedals Anti-slip cover with reflector and sealed bearings
Seat Sport Comfort
Certification No L1e-Moped 2002/24
Colours Red / Blue Red / Blue Green White/ Black

34 35
2.9. Dimensions
Distance between wheel centers
Length
Wheelbase
Seat
height
Height
Release angle
BRINCO R BRINCO R-E BRINCO C BRINCO S
Width 768 mm 738 mm
Wheelbase 1.200 mm 1.189 mm
Length 1.856 mm 1.854 mm 1.846 mm
Seat height SUBCHASSIS STANDARD: Max 1.164,2 - Min 1.061 mm
SUBCHASSIS LOW SEAT: Max 1.140,2 - Min 1.011 mm
SUBCHASSIS STANDARD: Max 1.114,2 - Min 1.011 mm
SUBCHASSIS LOW SEAT: Max 1.090,2 - Min 961 mm
Height 1.115 mm 1.098 mm 1.090 mm
Base height to ground 273,6 mm 223,6 mm
Weight 39 kg 40 kg 42,6 kg
Release angle 23,2o

37
3. GENERAL OPERATION

38 39
1. Adapt the seat and handlebar position to your size so that they are in a safe and
comfortable position. Make sure all items are well secured and that they are in the proper
position.
2. Adjust the position of the rear side mirror to have a clear vision (just in case it is
equipped with it).
3. Adapt the position of the brake levers so that you can always reach them easily. Make
sure you are very familiar with the brake lever configuration (front brake to the right / rear
brake to the left). [See section 4.3]
4. Check the operation of the brakes. Press each brake lever individually while pushing
the vehicle to check that the wheels lock completely. [See section 4.3]
5. Check tyre condition and pressure periodically. [See section 4.4]
6. Set both the front and the rear suspension as you prefer.
7. With the engine stop button in the o position [See section 2.3] operate the
accelerator control and release it to check that it returns to its initial position.
8. Check the condition of the sprockets, transmission plate and the chain lubrication
[See section 4.5]. Make adjustments if necessary.
3.1. Prior checks
AFTER A FALL OR A MOTO-BIKE
ROLLOVER, YOU MUST PERFORM
A COMPREHENSIVE REVIEW
BEFORE RIDING THE VEHICLE
AGAIN AND VISIT A BULTACO
MOTORS OFFICIAL SERVICE FOR
A PROFESSIONAL INSPECTION.
DETERIORATED TYRES OR
TYRES WITHOUT THE CORRECT
PRESSURE CAN CAUSE THEM
TO BURST UNEXPECTEDLY AS
WELL AS A LOSS OF CONTROL
OF THE VEHICLE. LOW PRESSURE
WILL REDUCE THE RIDE RANGE
SIGNIFICANTLY.
To make sure your Brinco is ready for use, you must perform the following checks:
BATTERY AND CHARGER
The battery incorporates a Management System (BMS) that monitors the cell’s status
and optimises charging to provide maximum performance and a longer lifespan.
Fully charge the battery before the first use. During charging, the charger LED light will
be yellow. When the battery is fully charged, the charger LED light will turn green, meaning
that the battery is ready to use.
The battery range may vary considerably depending on conditions such as the slope of
the road and pedaling. [See section 3.4]
If during a long ride the level of the battery charge drops to 25% of the total capacity
(2 bars on the dashboard), the battery management system will switch to ECO mode
automatically. The system will be deactivated before a complete battery discharge occurs.
IF THE SAFETY SEAL IS BROKEN IT WILL
RESULT IN THE AUTOMATIC LOSS OF THE
WARRANTY.
FULLY CHARGE THE BATTERY BEFORE
FIRST USE.
NEVER CUT WIRES OR MODIFY ANY
OF THE POWER COMPONENTS. IT CAN
CAUSE SERIOUS INJURY.
THE BATTERY HAS A SAFETY SEAL WITH
SAFETY WARNINGS. AS IT IS A POWER
ELEMENT, IT CAN BE HANDLED BY A
BULTACO MOTORS OFFICIAL DEALER ONLY.
9. Check the electrical system of the vehicle (battery, motor, controller, power
wiring, front light (just in case it is equipped with it)). All wires and elements must
be in perfect condition and external connectors correctly positioned. Check the
battery charge level on the dashboard. [See section 2.4]
If after reading these instructions you still have questions, contact your Bultaco
Motors Ocial Dealer, who will be happy to help.