Burg Wächter SECUTRONIC User manual

BURG-WÄCHTER UK
Eurocam Technology Park
Chase Way, Bradford BD5 8HW
burg.biz/uk

en SecuTronic – Operating instructions
Dear customer,
Thank you for choosing a BURG-WÄCHTER safe with an electronic SecuTronic
locking system. These locks are certied according to ECB•S Class A.
You have purchased a product that meets extremely high security
requirements and was developed and manufactured according to current
technical standards. This lock is certied according to EN 1300: 2018.
(Classication of high-security locks according to their resistance to
unauthorised opening).
Important: Please read the entire instruction manual before
programming and keep this manual safe so that you can look
at it at a later date.
We hope you enjoy your new BURG-WÄCHTER safe.
General information
Activation
The electronics are switched on using the button located on the
keyboard. Once pressed, the display shows the BURG-WÄCHTER logo for a
moment before the input screen for the pin code appears.
Languages
The menu navigation is available in twelve languages and can be changed
via the menu item "Languages". For detailed information, please refer to
chapter “Sprache/Language Menu”.
Blocking times
To protect against tampering, the lock electronics block access to the safe
for ve minutes if an incorrect pin code has been entered three times
in succession. Then, for every further incorrect entry, ten minutes.
During this blocking time, the remaining time on the display counts down.
It is not possible to open the safe during this time, even with a valid user or
administrator code.
BURG-WÄCHTER UK
1

Increasing burglary protection
Please take care your pin and administrator codes do not fall into the
wrong hands. Therefore, please store your codes in a safe location so that
these can only be accessed by authorised persons. In the event you lose a
code, the pin code must be changed at the earliest opportunity.
• The factory code must be changed as soon as the lock is commissioned.
• Codes that are easy to guess (e.g. 1, -2, -3, -4, -5, -6) must not be used.
• Personal data (e.g. birthdays) or other data that may be guessed with
knowledge of the code owner must not be used as a pin code.
• After changing a code, try the new pin code several times with
the door open.
Attention: All changes to the administrator code, the factory set code and
the user code must be carried out with the safe door open!
After the locking system has been changed to a new code, it must be
tried several times with the door is open to ensure it works.
BURG-WÄCHTER UK
Input options
Number keys:
The numbers “1” – “0” are used for input
e.g. when entering the code.
“Func” key:
The “Func” key adapts its function to the
situation. You change to the previous menu
level by pressing the key or you delete
an entered character and you can also go back to the main menu.
The display will show the current function of the key.
“On/Enter” key:
The “On/Enter” button starts the system or selects the current menu item.
Keys “1” and “2”:
If there are several options, you can scroll up and down using these keys.
The display shows this function is available with corresponding arrows.
2

Display
Species whether you can use the “Func” key
to cancel the last entry ( ) or switch to the
main menu (
BURG-WÄCHTER UK
FUNC: M
).
(
2:
) appears when you can scroll down
using the “2” key.
(
1:
) appears when you can scroll up using
the “1” key.
() indicates the battery level.
( / ) indicates whether the lock has
released and the safe can be now
opened.
Opening
Opening with PIN code
• Switch on the lock using the key .
• Enter the 6-digit PIN code (factory setting “1-2-3-4-5-6”).
• “Please turn the knob!“appears in the display.
• Turn the knob and open the door.
3
Code entry:
FUNC: M
Please turn
the knob!
Code change
Language/Sprache
Administrator ...
Info
FUNC:1: 2:
M A I N M E N U
Code entry:
FUNC: M

Menu structure
Menu structure overview
• Code change
• Language
• Administrator
> User
BURG-WÄCHTER UK
> Create
> Delete
> Restructure
> Processes
> Register
• Info
> System info
> System check
Description of the menu functions
Code Change menu
Changing the administrator code and the user code.
The safe is shipped with a factory set admin code. For security reasons
this must be changed to an individually set code.
• Switch on the lock using the key
• Then press .
• “Main menu“appears.
• Conrm with .
• You can use the keys 1 or 2 to scroll until the
administrator/user is selected for which you
wish to change the code for.
• Conrm with .
• Enter the old or factory code that was previ-
ously set using the keyboard and press .
• Enter the new code using the keyboard
and conrm with .
• Repeat your entry and conrm it again
with .
• “Code change completed!“is displayed after a
correct entry.
• Press any key.
4
Code change
Language/Sprache
Administrator ...
Info
FUNC:2:
M A I N M E N U
New Code:
FUNC: M
Code change
completed!
FUNC:

Note: When a safe lock is setup for the rst time, additional information
on the current date and time may be requested. This can be changed
using the main menu when required.
• Enter the day (2 digits)
• Enter the month (2 digits)
• Enter the year (2 digits)
• Enter the hour (2 digits)
• Enter the minutes (2 digits)
BURG-WÄCHTER UK
Language menu
• Switch on the lock using the key .
• Then press .
• “Main menu“appears.
• Scroll with the 1 or 2 key until the
“Language“menu item is highlighted.
• Conrm with .
• “Main menu/language“appears.
• Use keys 1 or 2 to scroll until the desired
language is marked.
• Conrm with .
• “Data has been saved!“appears on the display
• Press any key.
5
Code change
Language/Sprache
Administrator ...
Info
FUNC:1: 2:
M A I N M E N U
Češ�na
Deutsch
English
Español
FUNC:
L A N G U A G E
1: 2:

BURG-WÄCHTER UK
Administrator menu
This menu has several sub-menus to group func-
tions. The functions within this section can only
be fully used with the administrator code.
Menu Administrator/User
Menu Administrator/User/Create
The created user can open the safe.
Sub-menu Administrator/User/Create
• Switch on the lock using the key .
• Then press .
• “Main menu“appears.
• Scroll with the 1 or 2 key until the
“Administrator“menu item is highlighted.
• Conrm with .
• “Administrator“appears.
• Conrm with .
• “User“appears.
• Conrm with .
• Enter the administrator code to acquire the
authorisation for programming.
• The next free memory cell is displayed
(e.g. USER.0001 CD).
• Enter the 6-digit code and conrm it with .
• Save with .
6
USER.0001 CD
FUNC: M
USER.0001 CD
Created!
FUNC:
Create
Delete
FUNC:2:
U S E R
Code change
Language/Sprache
Administrator ...
Info
FUNC:1: 2:
M A I N M E N U

BURG-WÄCHTER UK
Menu Administrator/User/Delete
Deleted users no longer have access to the safe.
However, these will remain in the history.
Sub-menu Administrator/User/Delete
• Switch on the lock using the key .
• Then press .
• “Main menu“appears.
• Scroll with the 1 or 2 key until the
“Administrator“menu item is highlighted.
• Conrm with .
• “Administrator“appears.
• Conrm with .
• “User“appears.
• Conrm with .
• “Create“appears.
• Scroll with the 1 or 2 key until the “Delete“
menu item is highlighted.
• Conrm with .
• Enter the administrator code to acquire the
authorisation for programming.
• You can use the keys 1 or 2 to scroll until the
user is marked whose code is supposed to be
deleted.
• Conrm with .
• “Dataset has been deleted!“appears.
• Press any key.
Menu Administrator/Restructure
• Switch on the lock using the key .
• Then press .
• “Main menu“appears.
• Scroll with the 1 or 2 key until the
“Administrator“menu item is highlighted.
• Conrm with .
• “Administrator“appears.
• Scroll with the 1 or 2 key until the “Restructure“
menu item is highlighted.
• Conrm with .
• Enter the administrator code to acquire the
authorisation for programming.
• “Restructuring in progress!“appears.
7
Dataset has
been deleted!
FUNC:
USER.0001 CD
FUNC: M1: 2:
Create
Delete
1: FUNC:
U S E R
Restructuring
in progress!
User
Restructure
Processes
Install
FUNC:1: 2:
A D M I N

Menu Administrator/Processes
The opening or closing history of the safe can be
shown on the display under Processes.
• Switch on the lock using the key .
• Then press
BURG-WÄCHTER UK
.
• “Main menu“appears.
• Scroll with the 1 or 2 key until the
“Administrator“menu item is highlighted.
• Conrm with .
• “Administrator“appears.
• Scroll with the 1 or 2 key until the “Processes“
menu item is highlighted.
• Conrm with .
• Scroll with the 1 or 2 key through the
data records.
• Conrm with .
Menu Administrator/Register
In the event of a complete system failure, the
electronic control panel may have to be registered
again with the locking mechanism.
• Switch on the lock using the key .
• Then press .
• “Main menu“appears.
• Scroll with the 1 or 2 key until the
“Administrator“menu item is highlighted.
• Conrm with .
•“Administrator“appears.
• Scroll with the 1 or 2 key until the “Register“
menu item is highlighted.
• Conrm with .
• Enter the administrator code to acquire the
authorisation for programming.
• “Dataset has been stored“appears.
• Press any key.
8
User
Restructure
Processes
Install
FUNC:1: 2:
A D M I N
Administrator
Code entry
FUNC: M
1: 2:
User
Restructure
Processes
Install
FUNC:
A D M I N
1:
Dataset has
been stored
FUNC:

BURG-WÄCHTER UK
Info menu
In this menu, you can view system
information reports.
Menu info/System info
• Switch on the lock using the key .
• Then press .
• “Main menu“appears.
• Scroll with the 1 or 2 key until the “Info“menu
item is highlighted.
• Conrm with .
• “Info“appears.
• Conrm with .
• Conrm with to get detailed information
about the system after entering the
administrator code with administrator rights.
• The system information is displayed.
• Scroll with button 1 or 2 to view the
information.
• Use the button to return.
Info/system check menu
• Switch on the lock using the key .
• Then press .
• “Main menu“appears.
• Scroll with the 1 or 2 key until the “Info“menu
item is highlighted.
• Conrm with .
• “Info“appears.
• Scroll with the 1 or 2 key until the
“ystem check“menu item is highlighted.
• Conrm with .
• Conrm with to get detailed information
about the system after entering the
administrator code with administrator rights.
• The system check information is displayed.
• Scroll with button 1 or 2 to view the
9
information.
• Use the button to return.
System info
Systemcheck
FUNC:
I N F O
2:
System info
Systemcheck
FUNC:
I N F O
1: 2:
Info
EE-V1.0
SNE:20.0A.00.00
FUNC: M2:
EE
�ADC 5.45V
�Flash
�Touch con.
FUNC: M2:
Code change
Language/Sprache
Administrator ...
Info
FUNC:1:
M A I N M E N U

Battery replacement
You can see the battery status at any time
using the battery level indicator in the top
right of the display. If the battery capacity
is running low, a corresponding message
appears on the display: When this notice
appears, change the batteries as soon as
possible.
Remove the two screws on the underside of
the lock electronics. This will require a Torx T8
screwdriver.
BURG-WÄCHTER UK
Let the lid slide out together with the batteries.
Remove the old batteries and dispose of them
according to the disposal instructions. Replace
the batteries with four new 1.5 V AA Mignon
batteries and according to the correct polarity.
For this purpose, illustrations are shown on the
battery holder. Please use branded batteries and
no rechargeable batteries.
Push the lid and batteries back into the locking
electronics and screw them tight.
10
Please change
batteries!
FUNC:

BURG-WÄCHTER UK
Technical details
Warranty
BURG-WÄCHTER products comply with the technical standards in
force at the time of production and adhere to our own quality
standards. The guarantee only covers defects which can be proved
to have resulted from production or material defects at the time of
purchase. The warranty ends after two years, further claims are
excluded. Defects and damage caused by e.g. transport, incorrect
operation, improper use, wear etc. are excluded from the warranty.
The batteries are not included in the guarantee. A short description
of any defects identied must be made in writing and the device
returned to the place it was purchased, together with the original
packaging. After the device has been tested, and within a
appropriate period of time, the guarantor will decide whether or
not to repair or exchange the item.
Attention:
In order to deliver a awless and high quality product to you and to better
assist you in case of service or repair, it is necessary that faulty or defective
devices along with the valid administrator code be presented to your dealer
together with the original documentation.
For returns, all undamaged device parts must furthermore be in the factory
setting due to your right of revocation. Failure to comply with this will
invalidate the warranty.
11
Number of
administrator codes: 1
Number of user codes: 1 (max.)
Blocking times: After an incorrect code is entered 3x,
5 minutes, thereafter 10 minutes
Power supply: 4x AA MIGNON LR6 ALKALINE
Date/time: -
Updatable
(rmware):
-
History number: 500

BURG-WÄCHTER UK
Printing and typesetting errors as well as technical changes reserved.
Disposal of the device
Dear customer,
Please help us avoid unnecessary waste. Should you intend to dispose of
this device at any time, please remember that many components of this
device contain valuable materials that can be recycled.
Please be aware that electrical and electronic equipment and
batteries marked in this way must not be disposed of with
household waste but collected separately. Please obtain infor-
mation on the collecting points for electrical waste from the
responsible authority of your city/municipality.
BURG-WÄCHTER KG hereby declares that this device complies
with the Directives 2014/30/EU, (EMC) and 2011/65/EU (RoHS).
The complete text of the EU Declaration of Conformity is
available at the following Internet address: www.burg.biz
Safety recommendation
Please clean the keyboard operating surface periodically with a microbre
cloth (e.g. glasses cleaning cloth for spectacles) to remove any ngerprints
on the keyboard surface.
12

Notes
BURG-WÄCHTER UK
13

Notes
BURG-WÄCHTER UK
14

BURG-WÄCHTER UK
Eurocam Technology Park
Chase Way, Bradford BD5 8HW
T l: [phone]
E-mail: [e-mail]
burg.biz/uk